|Table of Contents|

Experiment and simulation on atomization characteristics of screw centrifugal nozzle(PDF)

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]

Issue:
2015年06期
Page:
21-26
Research Field:
研究与设计
Publishing date:

Info

Title:
Experiment and simulation on atomization characteristics of screw centrifugal nozzle
Author(s):
WU Gaoyang SU Lingyu NIE Wansheng HE Haobo QIAO Ye
Equipment Academy, Beijing 101416, China
Keywords:
screw centrifugal nozzleatomization characteristicVOF modelspray angle
PACS:
V434-34
DOI:
-
Abstract:
The spray morphology and angle variation law of screw centrifugal nozzle were researched via high-speed camera and volume of fluid (VOF) model at different injection pressure and back pressure. The results show that the primary breakup of drop can be exacerbated significantly and the broken length of drop can be shortened at higher injection pressure drop, and the greater impact on secondary breakup of drop will appear at the higher back pressure and it is helpful to improve atomization quality; with higher back pressure and injection pressure drop, the spray angle increases gradually to a constant value, but the increase of back pressure will have much smaller contribution to the angle gradient than the increase of injection pressure drop, it means that the influence of the former on spray angle is more significantly. The numerical simulation results of spray morphology and angle agree well with those of the experiment.

References:

[1]HOLTZCLAW D, SAKMAN T, BENJAMIN M A. Investigation of flow in a simplex fuel nozzle[J]. AIAA Journal, 1997, 33(7): 1-8.
[2]JENG S M, JOG M A, BENJAMIN M A. Computational and experimental study of liquid sheet emanating from simplex fuel nozzle[J]. AIAA Journal, 1998, 36(2): 201- 207.
[3]INAMURA T, TAMURA H, SAKAMOTO H. Characteristics of liquid film and spray injected from swirl coaxial injector[J]. Journal of Propulsion and Power, 2003, 19(4): 632-639.
[4]杨立军, 葛明和, 张向阳, 等. 喷口长度对离心喷嘴雾化特性的影响[J]. 推进技术, 2005, 26(3): 209-214.

[5]杨立军, 葛明和, 张向阳. 液体离心喷嘴雾化场动态特性的初步研究[J]. 航空动力学报, 2005, 20(6): 1803-1807.

[6]张征, 樊未军, 杨茂林. 双路离心式喷嘴雾化特性研究[J]. 工程热物理学报, 2003, 24(1): 153-156.
[7]赵大勇, 李伟仲. VOF方法中几种界面重构技术的比较[J]. 热科学技术, 2003, 2(4): 318-323.
[8]岳明, 徐航, 杨茂林. 离心式喷嘴内气液两相流动的数值模拟[J]. 工程热物理学报, 2003, 24(5): 888-890.

Memo

Memo:
-
Last Update: 1900-01-01