|Table of Contents|

Construction of rocket engine wizard simulation process(PDF)

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]

Issue:
2020年05期
Page:
80-86
Research Field:
研究与设计
Publishing date:

Info

Title:
Construction of rocket engine wizard simulation process
Author(s):
MA Xiaodan1; ZHOU Chenchu2; ZHANG Chenxi2
(1.Rocket Force University of Engineering, Xi’an 710072, China; 2.Xi’an Aerospace Propulsion Institute,Xi’an 710100, China)
Keywords:
simulation flow;  rocket engine;  standardization;  digital;  wizard
PACS:
V430
DOI:
-
Abstract:
Based on the objectives of improving the standardization, digitization and reducing the difficulty of engine component simulation, a construction method of rocket engine simulation process based on the wizard simulation process by describing the wizard simulation process was presented here.Based on the basic framework provided by ANSYS software, the secondary development was carried out by using the interface technology to realize the development of the simulation interface and simulation process of the wizard engine components, and the construction of the engine simulation process was completed.The construction of the engine wizard simulation process was based on the digital wizard technology.The model preprocessing, mesh generation, operating conditions, boundary setting and post-processing of the engine components were carried out in turn.According to the technical route, the example of the whole process of wizard simulation on typical engine components was given, and the result of digital simulation process was finally shown.The engine simulation system constructed according to the wizard simulation process has obvious effects on improving design cooperation, facilitating knowledge precipitation and standardizing the simulation process.

References:

[1] 魏鹏飞, 吴建军, 刘洪刚, 等.液体火箭发动机一种通用模块化仿真方法[J].推进技术, 2005, 26(2): 147-150.
[2] 张黎辉, 李伟, 段娜.液体火箭发动机模块化通用仿真[J].航空动力学报, 2011, 26(3): 687-691.
[3] 唐家鹏.ANSYS FLUENT 16.0超级学习手册[M].北京: 人民邮电出版社, 2016.
[4] 张晨曦, 马晓丹.火箭发动机涡轮泵集成设计系统[J].火箭推进, 2015, 41(4): 79-83.
ZHANG C X, MA X D.Integration design system for turbo pump in rocket engine[J].Journal of Rocket Propulsion, 2015, 41(4): 79-83.
[5] 蔡国飙.液体火箭发动机设计[M].北京:北京航空航天大学出版社,2011.
[6] 聂侥, 程玉强, 吴建军.航天器推进系统气液路故障仿真[J].国防科技大学学报, 2017, 39(2): 32-41.
[7] 郭敬, 宋晶晶, 孔凡超.发动机推进剂增压输送系统建模仿真技术综述[J].火箭推进, 2015, 41(5): 1-6.
GUO J, SONG J J, KONG F C.Overview of modeling and simulation technology for propellant pressurization feed system of liquid rocket engine[J].Journal of Rocket Propulsion, 2015, 41(5): 1-6.
[8] 晏政, 刘泽军, 程玉强, 等.航天器推进系统模块化建模方法[J].国防科技大学学报, 2012, 34(4): 28-32.
[9] 王倍乐.航天器推进系统组态化模型仿真研究与软件实现[D].哈尔滨: 哈尔滨工业大学, 2013.
[10] 史锻.面向集成设计平台的姿轨控液体火箭发动机设计方法研究[D].长沙: 国防科学技术大学, 2014.
[11] 何文会.航天器仿真平台与数据库设计研究[D].长沙: 国防科学技术大学, 2007.
[12] 姚华廷, 王曦, 苏三买.航空发动机数控系统综合仿真平台设计[J].航空动力学报, 2010, 25(9): 2148-2154.
[13] 张海波, 姚文荣, 陈国强.涡轴发动机/直升机综合控制仿真平台设计[J].推进技术, 2011, 32(3): 383-390.
[14] 李磊, 敖良波, 王心美, 等.航空发动机涡轮动叶设计平台的构建与验证[J].航空发动机, 2012, 38(3): 24-28.
[15] 丁亦凡.冲压发动机设计仿真平台研究[D].天津: 天津大学, 2015.
[16] 全静, 汪伟, 郝明.基于SOA的航空发动机设计/仿真集成管理系统[J].机械设计, 2017, 34(6): 82-87.
[17] 贾玥,李英梅,董雪.一种大流量快响应四机组合电磁阀的集成设计[C]//中国航天第三专业信息网第四十届技术交流会暨第四届空天动力联合会议论文集.昆明:中国航天第三专业信息网,2019.
[18] 尹嘉娃.低冰点双模式姿轨控推进系统建模与仿真研究[D].湘潭: 湘潭大学, 2009.
[19] 孙晓玉.基于Ansys双螺杆膨胀机动态特性有限元仿真[J].技术与市场,2020(2):32-36.
[20] 赵万里,郭迎清,王哲,等.液氧/甲烷火箭发动机建模仿真与特性分析[C]//中国航天第三专业信息网第四十届技术交流会暨第四届空天动力联合会议论文集.昆明:中国航天第三专业信息网,2019.

Memo

Memo:
-
Last Update: 2020-10-20