[1] 任加万,谭永华.冲压发动机燃烧室热防护技术[J].火箭推进,2006,32(4):38-42.
REN J W,TAN Y H.Thermal protection techniques of ramjet combustor[J].Journal of Rocket Propulsion,2006,32(4):38-42.
[2] EKKAD S,HAN J C.A review of hole geometry and coolant density effect on film cooling[C]//Proceedings of ASME 2013 Heat Transfer Summer Conference.Minneapolis,Minnesota: ASME,2013.
[3] WATSON T B,NAHANG—TOUDESHKI S,WRIGHT L M,et al.Application of S—PIV for investigation of round and shaped film cooling holes at high density ratios[C]//Proceedings of ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition.Seoul,South Korea:ASME,2016.
[4] EBERLY M K,THOLE K A.Time—resolved film—cooling flows at high and low density ratios[J].Journal of Turbomachinery,2014,136(6):061003.
[5] WRIGHT L M,MCCLAIN S T,CLEMENSON M D.Effect of density ratio on flat plate film cooling with shaped holes using PSP[J].Journal of Turbomachinery,2011,133(4):041011.
[6] 陈大为,朱惠人,李华太,等.基于压力敏感漆技术的尾迹对涡轮动叶前缘气膜冷却影响研究[J].推进技术,2019,40(4):858-865.
[7] 李佳,任静,蒋洪德.密度比和吹风比对透平静叶气膜冷却的影响[J].工程热物理学报,2011,32(8):1295-1298.
[8] 姚家旭,雷蒋.不同横向距离下双射流孔流动与冷却特性实验研究[J].火箭推进,2018,44(1):36-43.
YAO J X,LEI J.Experimental study on flow and cooling characteristics of double—jet film—cooling holes at different spanwise distances[J].Journal of Rocket Propulsion,2018,44(1):36-43.
[9] YAO J X,XU J,ZHANG K,et al.Interaction of flow and film—cooling effectiveness between double—jet film—cooling holes with various spanwise distances[C]//Proceedings of ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition.Charlotte,North Carolina: ASME,2017.
[10] SHIAU C C,CHEN A F,HAN J C,et al.Full—scale turbine vane end—wall film—cooling effectiveness distribution using PSP technique[C]//Proceedings of ASME Turbo Expo 2015: Turbine Technical Conference and Exposition.Montreal,Quebec,Canada:ASME,2015.
[11] JONES T V.Theory for the use of foreign gas in simulating film cooling[J].International Journal of Heat and Fluid Flow,1999,20(3):349-354.
[12] SHADID J N,ECKERT E R G.The mass transfer analogy to heat transfer in fluids with temperature—dependent properties[J].Journal of Turbomachinery,1991,113(1):27-33.
[13] HAN J C,RALLABANDI A P.Turbine blade film cooling using psp technique[J].Frontiers in Heat and Mass Transfer,2010,1(1):1-16.
[14] KAYS W M.Convective heat and mass transfer[M].[S.l.]:Tata McGraw—Hill Education,2012.
[15] BOGARD D G,THOLE K A.Gas turbine film cooling[J].Journal of Propulsion and Power,2006,22(2):249-270.
[16] HAN J C,DUTTA S,EKKAD S.Gas turbine heat transfer and cooling technology[M].New York: CRC Press,2012.
[17] WRIGHT L M,GAO Z H,VARVEL T A,et al.Assessment of steady state PSP,TSP,and IR measurement techniques for flat plate film cooling[C]//Proceedings of ASME 2005 Summer Heat Transfer Conference.San Francisco,California,USA: ASME,2005.
[18] WIESE C J,RUTLEDGE J L,POLANKA M D.Experimental evaluation of thermal and mass transfer techniques to measure adiabatic effectiveness with various coolant to freestream property ratios[J].Journal of Turbomachinery,2018,140(2):021001.
[19] RUTLEDGE J L,POLANKA M D.Computational fluid dynamics evaluations of unconventional film cooling scaling parameters on a simulated turbine blade leading edge[J].Journal of Turbomachinery,2014,136(10):101006.
[20] RAVELLI S,BARIGOZZI G.Numerical evaluation of heat/mass transfer analogy for leading edge showerhead film cooling on a first—stage vane[J].International Journal of Heat and Mass Transfer,2019,129: 842-854.
[21] YAO J X,SU P F,HE J H,et al.Experimental and numerical investigations on double—jet film—cooling with different mainstream incidence angles[J].Applied Thermal Engineering,2020,166: 114737.
[22] WANG Z,LIU J J,AN B T,et al.Effects of axial row—spacing for double—jet film—cooling on the cooling effectiveness[C]//Proceedings of ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition.Vancouver,British Columbia,Canada: ASME,2012.