|Table of Contents|

Analysis of the influence of solid rocket motor characteristics to air-launched glide ballistic vehicle performance(PDF)

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]

Issue:
2022年01期
Page:
61-68
Research Field:
研究与设计
Publishing date:

Info

Title:
Analysis of the influence of solid rocket motor characteristics to air-launched glide ballistic vehicle performance
Author(s):
YU Jiaquan; ZHANG Cheng; YUAN Ya; HUANG Huihui
(China Academy of Launch Vehicle Technology,Beijing 100076,China)
Keywords:
air-launched;  glide ballistic vehicle;  sequential quadratic programming method;  solid rocket motor;  thrust type
PACS:
V421.1
DOI:
-
Abstract:
In order to investigate the effects of solid rocket motor(SRM)characteristics to the comprehensive performance of the air-launched glide ballistic vehicle,a ballistic optimization model based on sequential quadratic programming(SQP)method was constructed,and several SRM schemes with different thrust types and different parameters were designed.By the ballistic simulation analysis of air-launched glide ballistic vehicle,the optimum climbing attack angle variation laws under different SRM characteristics were obtained,and the key ballistic indicators were contrasted.It is found that vehicle has larger ballistic apex velocity and longer range with the thrust mode of long time-low thrust; and the max flight dynamic pressure is lower with dual-pulse or single-chamber double-thrust thrust type,which is beneficial to reduce the weight of load bearing structure and thermal protection structure.

References:

[1] 王少平,董受全,隋先辉,等.助推滑翔高超声速导弹发展趋势及作战使用研究[J].战术导弹技术,2020(1):9-14.
[2] 张灿,林旭斌,刘都群,等.2019年国外高超声速飞行器技术发展综述[J].飞航导弹,2020(1):16-20.
[3] 王鹏飞,王光明,蒋坤,等.临近空间高超声速飞行器发展及关键技术研究[J].飞航导弹,2019(8):22-28.
[4] PHILLIPS T H. A common aero vehicle(CAV)model,description,and employment guide[R].New York:Schafer Corporation for AFRL and AFSPC,2003.
[5] PUTIN V. Presidential address to the federal assembly[EB/OL].(2018-03-01). http://en. kremlin. ru/events/president/news/56957.
[6] DONALD D. Final captive test for U.S. air force’s hypersonic weapon[EB/OL].(2020-08-10). https://www.ainonline.com/aviation-news/defense.
[7] 辛朝军,蔡远文,姚静波. 空中发射技术现状及趋势分析[J].装备学院学报,2014,25(5):67-73.
[8] 聂川义,郭建国,周军,等.空射弹道导弹助推段弹道设计与优化[J].飞行力学,2012,30(4):357-361.
[9] 孙丕忠,朱伯鹏,夏智勋,等.水平空中发射固体有翼运载火箭总体/动力/气动/轨道一体化设计与优化[J].固体火箭技术,2005,28(3):157-160.
[10] 杨明,刘明,郑伟,等.空射近空间飞行器助推弹道规划方法[J].弹道学报,2019,31(3):7-11.
[11] 钱杏芳,林瑞雄,赵亚男. 导弹飞行力学[M].北京:北京理工大学出版社,2000.
[12] 石国春. 关于序列二次规划(SQP)算法求解非线性规划问题的研究[D].兰州:兰州大学,2009.
[13] 李瑜,杨志红,崔乃刚. 助推-滑翔导弹弹道优化研究[J].宇航学报,2008,29(1):66-71.
[14] 冯还涛. 求解非线性无约束优化问题的修正BFGS方法[D].南京:南京理工大学,2010.
[15] 鲍福廷,侯晓. 固体火箭发动机设计[M].北京:中国宇航出版社,2016.
[16] 侯晓,付鹏,武渊. 固体火箭发动机能量管理技术及其新进展[J].固体火箭技术,2017,40(1):1-6.
[17] 贾晓玲,田晓丽,杨东,等.固体火箭发动机单室双推力装药设计[J].指挥控制与仿真,2019,41(1):125-130.
[18] 丁杰,赵启扬,余明敏,等.多脉冲固体火箭发动机研究概述[C]//第五届空天动力联合会议暨中国航天第三专业信息网第41届技术交流会论文集(第二册). 南京:[s.n.],2020.
[19] 张翼,郑哲. 空空导弹双脉冲固体火箭发动机能量分配研究[J].科技与创新,2019(24):4-7.
[20] 野邵文. 双脉冲固体火箭发动机能量分配优化研究[D].哈尔滨:哈尔滨工业大学,2013.

Memo

Memo:
-
Last Update: 1900-01-01