|Table of Contents|

Application of plunge milling in inducer machining(PDF)

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]

Issue:
2014年01期
Page:
76-80
Research Field:
工艺与材料
Publishing date:

Info

Title:
Application of plunge milling in inducer machining
Author(s):
SHI Yong;  HE Wei-dong;  LU Bo
Xi’an Space Engine Factory, Xi’an 710100, China
Keywords:
plunge milling;  inducer;  turbopump of rocket engine
PACS:
V434-34
DOI:
-
Abstract:
A UG TCL-based calculating method of plunge milling in inducer machining is introduced. DEFORM software is used to calculate the technological parameters of inducer plunge milling. A process specification for inducer plunge milling was obtained after process optimization. The inducer machined with the process specification met the design requirements, and passed the engine hot test.

References:

[1]耿国盛, 徐九华, 傅玉灿. 高速铣削近α钛合金的切削温度研究[J]. 机械科学与技术, 2006, 15(3): 229-332.
[2]陈皓晖, 刘华明, 孙春华. 国内外叶轮数控加工发展现状[J]. 航天制造技术, 2002 (2): 45-48.
[3]胡创国, 张定华, 任军学. 开式整体叶盘通道插铣粗加技术的研究[J]. 中国机械工程, 2007, 18(2): 153-155.
[4]单晨伟, 任军学, 张定华. 开式整体叶盘四坐标侧铣开槽粗加工轨迹规划[J]. 中国机械工程, 2007, 18(16): 1917- 1920.
[5]任军学, 张定华, 王增强. 整体叶盘数控加工技术研究[J].航空学报, 2004, 25(2): 205-208.
[6]许祥泰, 刘艳芳. 数控实用加工技术[M]. 北京: 机械工业出版社， 2000.
[7]张宪. 插铣法的特点与应用[J]. 工具展望, 2004 (4): 12.
[8]丰飞. 用户宏程序在数控加工中的应用[J]. 新技术新工艺, 2006 (1): 41-43.
[9]孙德茂. 插铣法挖腔用户宏程序的编程[J].模具工程, 2005 (10): 57-60.
[10]王庭俊. 基于宏程序铣削椭圆台[J]. 机械制造与自动化,2006 (3): 120-125.

Memo

Memo:
-
Last Update: 1900-01-01