|Table of Contents|

Research and practice of quality inspection system for three-dimensional model(PDF)

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]

Issue:
2018年02期
Page:
88-94
Research Field:
测控与试验
Publishing date:

Info

Title:
Research and practice of quality inspection system for three-dimensional model
Author(s):
CHEN Yanlin; LIN Yuan; DENG Bowen
Xi'an Aerospace Propulsion Institute,Xi'an 710100,China
Keywords:
liquid rocket engine;  three-dimensional model;  quality inspection
PACS:
V430-34
DOI:
-
Abstract:
With the application of MBD technology,the three-dimensional model becomes the only source of product information expression,the only carrier for designing and manufacturing information transmission and the only basis for production and manufacturing,and its quality is increasingly important. According to the engine design,technology,manufacturing specifications and the standards of CAD / CAM data quality inspection,the quality inspection system of 3D model are studied and developed in this paper to solve the problem existing in manual quality inspection of the 3D model. It was used in the process of developing the liquid propellant rocket engine. The efficient and rapid quality inspection of the three-dimensional model was achieved to reduce the repeated design caused by the quality problem of three-dimensional model,which has promoted the quality improvement of three-dimensional model of the model to ensure that the three-dimensional model meets the requirements of follow-up intelligent manufacturing and shorten the development cycle of the products.

References:

[1] 范玉青. 现代飞机制造技术[M]. 北京:北京航空航天大学出版社,2001.
[2] 休泽尔D K.液体火箭发动机现代工程设计[M]. 朱宁昌,等译.北京:中国宇航出版社.2004.
[3] 谭永华. 大推力液体火箭发动机研究[J].宇航学报,2013(10):1303-1308.
[4] 郑大勇,陶瑞峰,张玺,等.大推力氢氧发动机关键技术及解决途径.火箭推进,2014,40(2):22-27.
ZHENG Dayong,TAO Ruifeng,ZHANG Xi,et al. Study on key technology for large thrust LOX/LH2 rocket engine [J]. Journal of rocket propulsion,2014,40(02): 22-27.
[5] RADHAKRISHNA M,RAO C K. Vibration of double bellows type expansion joint in lateral and rocking modes [J]. International journal of structural stability and dynamics,2006,06(04): 575-588.
[6] 罗宏瀚. 借助有限元分析对输流波纹管元件的减振研究[J]. 矿山机械,2008,36(13):52-56.
[7] 刘永刚,司东宏,马伟等. 流固耦合下含夹层阻尼的多层金属波纹管刚度和阻尼研究[J]. 机械工程学报,2014,50(5):74-81.
[8] 罗宏瀚. 输流波纹管流固耦合振动的初步研究[J]. 振动与冲击,2008,27(11):149-153.
[9] 梁建术,苏强,李欣业. 基于ANSYS/Workbench流固耦合输液波纹管的模态分析[J]. 机械设计与制造,2013(2):91-93.

Memo

Memo:
-
Last Update: 1900-01-01