«Previous Article|Table of Contents|Next Article»

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]

Issue:

2008年01期

Page:

36-38

Research Field:

工艺与材料

Publishing date:

Info

Title:

Manufacturing technic of subsonic intake pipe for simulation test

Author(s):

Meng Jun

Xi'an Space Engine Factory，Xi'an 7 10100，China

Keywords:

simulation; test device; subsonic intake pipe; manufacturing technic

PACS:

V434

DOI:

-

Abstract:

Subsonic intake pipe is the key test device for a pre-research project simulation test． Because of the large overall dimension and high process precision，it is difficult to manufacture．The main technical difficults are the process of guide-tube，rectifier holes，and the guarantee of overall shape-position tolerance．After intensive technologic tests and technical analysis，the problems were solved and the reasonable technologic method was defined．The design requirements were fulfilled．

References:

[l]邹增大．焊接材料工艺及设备手册[M]．北京：化学工业 出版社。2004。
[2]张耀宸．机械加工工艺设计手册[M]．北京：航空工业出 版社。1987．
[3]成大先．机械设计手册[M]．北京：化学工业出版社，2002．
[4]压力容器用材料及热处理[M]．兰州石油机械研究所．北 京：化学工业出版社，2005．
[5]徐灏．机械设计手册[M]．北京：机械工业出版社，1992．
[6]郭镇帮．机械工业最新基础标准应用手册[M].北京：机 械工业出版社。1988． 川赵如福．金属机械加工工艺人员手册[M]．上海：上海科 学技术出版社，1981．
[8]陈建宁，马丽珍．断流阀加工工艺研究[J]．火箭推进． 2005，3l(5)：47-50．

Memo

Memo:

-

Common functions

Last Update: 1900-01-01