|Table of Contents|

UG-based machining simulation of injector cooling channel(PDF)

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]

Issue:
2011年04期
Page:
59-63
Research Field:
工艺与材料
Publishing date:

Info

Title:
UG-based machining simulation of injector cooling channel
Author(s):
LIU Ying;  DONG Wen-ying
Xi’an Aerospace Engine Factory, Xi’an 710100, China
Keywords:
machining simulation;  UG/ISV;  cooling channel;  NC programming
PACS:
V434-34
DOI:
-
Abstract:
Based on the analyses of structural features of cooling channel on the injector shell and NC machining process, computer-aided machining of cooling channel was conducted with UG/ISV software. The 3D injector model, machining parameter selection, tool path programming and machining simulation are introduced in detail. A 5-axis machine was adopted to carry out machining tests. The result proves that the above process can ensure the machining quality and improve the machining efficiency.

References:

[1]黄宜松, 谢龙汉, 王磊. 数控加工入门与实例进阶[M]. 北京: 清华大学出版社, 2008.
[2]毛德君. UG基于实体的模具数控加工策略及应用[J]. 模具制造技术, 2005(9): 43- 46.
[3]谢国明, 曾向阳, 王学平. UG CAM 实用教程 [M]. 北京: 清华大学出版社, 2004.
[4]卫兵工作室. UGNX 正文版数控编程入门与实例进阶[M]. 北京: 清华大学出版社, 2007.
[5]黄宜松, 谢龙汉, 王磊. 数控加工入门与实例进阶[M]. 北京: 清华大学出版社, 2008.
[6]毛德君. UG基于实体的模具数控加工策略及应用[J]. 模具制造技术, 2005(9): 43- 46.
[7]范希营, 郭永环. 基于 UG/NX/CAM的复杂型腔的实体造型及铣削加工[J]. 机械设计与制造, 2009(10): 150-151.
[8]李春丽, 邓化宇. 数控多面加工仿真关键技术研究与实现[J]. 微计算机信息, 2009（8）: 116-117.
[9]沈春龙, 张友良. 基于三维虚拟环境的数控加工中心建模与仿真[J]. 机床与液压, 2003(5): 63-65.
[10]周济, 周艳红. 数控加工技术[M]. 北京: 国防工业出版社, 2002.
[11]王庆林. UG铣制造过程使用指导[M]. 北京: 清华大学出版社, 2002.
[12]李军锋, 李剑, 席平. 数控机床加工仿真应用[J]. 计算机仿真, 2003, 20(4): 28-34.

Memo

Memo:
-
Last Update: 1900-01-01