|Table of Contents|

Study on“dry process” to prepare reinforced fluoro plastic(PDF)

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]

Issue:
2012年06期
Page:
52-58
Research Field:
工艺与材料
Publishing date:

Info

Title:
Study on“dry process” to prepare reinforced fluoro plastic
Author(s):
BAI Long-teng;  JIANG Chao
Xi’an Aerospace Propulsion Institute, Xi’an 710100, China
Keywords:
reinforced fluoro plastic;  preparation process;  dry process;  wet pro
PACS:
V434-34
DOI:
-
Abstract:
The properties of two kinds of polyterafluoroethylene resins (P202 and FR104) for preparing the reinforced fluoro plastic were compared. The“dry process”to prepare the reinforced fluoro plastic was chosen to improve the process parameters, and adopted to produce two new kinds of reinforced fluoro plastic (FS-20d, FS-35d). The test results of the final products indicate that the preparation process formula and production process of“dry process”are stable, and the wear-resis- ting property, high temperature resistance, compactness, uniformity and phase dispersion of the new products prepared with“dry process”are better than the products yield by“wet process”.

References:

[1]赵德仁, 张慰盛. 高聚物合成工艺学[M]. 北京: 化学工业出版社, 1996.
[2]中国科学院兰州化学物理研究所. 填充聚四氟乙烯塑料的模压成型工艺[M]. 北京: 石油化学工业出版社, 1976.
[3]黄锐. 塑料成型工艺学[M]. 北京: 中国轻工业出版社, 1998.
[4]龚云表, 石安富. 合成树脂与塑料手册[M]. 上海: 上海科学技术出版社, 1994.
[5]陈风波, 王立峰. 运载火箭用典型低温密封材料[J]. 宇航材料工艺, 2009 (3): 15-18.
[6]何曼君, 陈维孝, 董西侠, 等. 高分子物理[M]. 上海: 复旦大学出版社, 1993.
[7]周维祥, 吴述扬, 郑道德, 等. 塑料测试技术[M]. 北京: 化学工业出版社, 1997.

Memo

Memo:
-
Last Update: 1900-01-01