[1]付永领, 祁晓野. AMESim系统建模和仿真——从入门到精通[M]. 北京: 北京航空航天大学出版社, 2006.
[2]刘国球. 液体火箭发动机原理[M]. 北京: 中国宇航出版社, 1993.
[3]秦家升, 游善兰. AMESim软件的特征及其应用[J]. 工程机械, 2004 (12): 6-8.
[4]张雪梅, 张黎辉, 金广明, 等. 减压器动态过程的数值仿真[J]. 航空动力学报, 2004, 19(4): 542-545.
[5]陈阳, 高芳, 张振鹏, 等. 气动薄膜调节阀控制系统工作过程的动态仿真[J]. 火箭推进, 2006, 32(6): 32-38.
[6]陈晓琴. 减压阀充填过程动态特性仿真[J]. 导弹与航天运载技术, 2006 (5): 48-52.
[7]何德胜, 郭正, 鲍福廷, 等. 采用流固耦合方法数值分析减压器动态响应[J]. 固体火箭技术, 2010, 33(6): 713- 717.
[8]戴梧叶, 马彬, 张国舟, 等. 减压器特性实验研究[J]. 北京航空航天大学学报, 1999, 25(6): 711-713.
[9]夏芳, 金广明. 减压器启动过程动态特性数值仿真[R]. 上海: 上海机电工程科技情报研究所, 1998.
[10]YANG Roger. CFD simulation of oil flow and flow ind- uce-dforces internal hydraulic valves[M]. USA: National Fluid Power Association and Society of Automotive Engineers, 2002.
[11]JIA Guang-zheng, WANG Xuan-yin, TAO Guo-liang, et al, Study on dynamic property of extra-high pressure pneumatic of control valve[C]// Proceedings of the 4th International Symposium on Fluid Power Transmission and Control. Hong Kong, China: [s.n.], 2002: 171-177.
[12]SALVADOR Guillermo Palau, VALVERDE Jaime Arviza. Three-dimensional control valve with complex geometry: CFD modeling and experimental validation, AIAA 2004-2422[R]. USA: AIAA, 2004.
[13]FEJTEK I, WALLER G, WONG R. Computational study of the flowfield of an aircraft outflow valve, AIAA 2005- 4843[R]. USA: AIAA, 2005.
[14]AHUJA V, HOSANGADI A, SHIPMAN J, et al. Simu- lations of in-stabilities in complex valve and feed sys- tems, AIAA 2006-4758[R]. USA: AIAA, 2006.
[15]CAVALLO P A, HOSANGADIA, AHUJA V. Transient simulations of valve motion in cryogenic systems, AIAA 2005-5152[R]. USA: AIAA, 2005.