|Table of Contents|

Parametrization sculpting software development for inducer based on Pro/E(PDF)

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]

Issue:
2014年03期
Page:
68-72
Research Field:
研究与设计
Publishing date:

Info

Title:
Parametrization sculpting software development for inducer based on Pro/E
Author(s):
ZHUANG Su-guo;  LUO Peng;  HOU Ning-tao;  Yang Xia-hui
Xi’an Aerospace Propulsion Institute, Xi’an 710100, China
Keywords:
inducer;  three-dimensional sculpting;  parametrization;  software development
PACS:
V434-34
DOI:
-
Abstract:
The significance and the current situation of the three-dimensional parametrization sculpting for inducer are illustrated. The two-dimensional hydraulic drawing of inducer was designed by PIND-2D which had been developed independently. The structural features of three-dimensional sculpting of inducer were analyzed. On this basis, the secondary development of Pro/E was executed by means of VC++ programming language under the condition of Pro/TOOLKIT environment. The program data interface between Pro/E and MFC was realized by using DLL, and then the three-dimensional parametrization sculpting software of inducer was successfully developed. The efficiency and quality of inducer's design were promoted.

References:

[1]庄宿国. 诱导轮设计方法及其在船用泵的应用[D]. 镇江: 江苏大学, 2012.
[2]关醒凡. 现代泵技术手册[M]. 北京: 宇航出版社, 1995.
[3]刘厚林, 庄宿国, 俞志君, 等. JW200-1000-315型离心泵诱导轮设计[J]. 华中科技大学学报（自然科学版）, 2011, 39(12): 14-17.
[4]朱祖超. 低比转速高速离心泵的理论与设计[M]. 北京: 机械工业出版社, 2007．
[5]FUJII A, MIZUNO S, HORIGUCHI H, et al．A method for the suppression of rotating cavitation by an accumu- lator at the inlet of an inducer [J]. Journal of Fluid Science and Technology, 2008, 3(7): 838-845.
[6]YOSHIDA Y, TSUJIMOTO Y, KATAOKA D, et al. Effects of alternate leading edge cutback on unsteady cavitation in 4-bladed inducers[J]. Journal of Fluids Engineering-Transactions of the ASME, 2001, 123(4): 762-770.
[7]张涛. 诱导轮CAD优化设计及内部三维流场分析 [D]. 镇江：江苏大学, 2003.
[8]郭晓梅, 李增芳, 王铁流, 等． 基于Pro/E诱导轮三维造型的研究与应用[J]. 煤矿机械, 2009, 30(3): 174-176.
[9]李世国. Pro/TOOLKIT程序设计[M]. 北京: 机械工业出版社, 2003.
[10]庄宿国, 刘厚林, 俞志君, 等. 诱导轮水力设计及其CAD软件开发[J]. 流体机械, 2011, 39(7): 50-54．
[11]张继春. Pro/ENGINEER二次开发实用教程[M]. 北京: 北京大学出版社, 2003.
[12]吴贤芳, 谈明高, 刘敏, 等. 双流道泵叶轮参数化三维造型[J]. 中国农村水利水电, 2009 (11): 103-106.
[13]刘厚林, 谈明高. 双流道泵[M]. 镇江: 江苏大学出版社, 2012.
[14]刘敏. 泵的参数化三维造型及其软件开发[D]. 镇江: 江苏大学, 2006.

Memo

Memo:
-
Last Update: 1900-01-01