航天推进技术研究院主办
[1]蒋瑜．王秋红.发动机试车控制软件工程化及质量管理[J].火箭推进,2008,34(04):60-64.
Jiang Yui Wang Qiuhong.Approach for improving reliability of rocket engine test control software[J].Journal of Rocket Propulsion,2008,34(04):60-64.
点击复制
Jiang Yui Wang Qiuhong.Approach for improving reliability of rocket engine test control software[J].Journal of Rocket Propulsion,2008,34(04):60-64.
发动机试车控制软件工程化及质量管理
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
34
期数:
2008年04期
页码:
60-64
栏目:
测控与试验
出版日期:
2008-08-29
- Title:
- Approach for improving reliability of rocket engine test control software
- Keywords:
- rocket engine; experiment; control software; reliability; quality control
- 分类号:
- V434.3
- 文献标志码:
- A
- 摘要:
- 为提高发动机试车控制软件的可靠性，通过需求分析、概要设计、详细设计、 软件测试等步骤实现了软件开发工程化。结合试验控制软件研制和使用特点，对软件质量管 理的具体步骤，即从设计评审、测试、验证、文档及技术状态管理等方面对软件开发过程进 行监督与管理，实现了软件开发的质量控制，达到了软件设计的透明性、继承性及高可靠性。
- Abstract:
- To improve reliability of the control software for rocket engine test，an engineering method is introduced into the developing process of the software through requirement analysis．brief design，detail design and software testing．Also quality management approaches are carried out con‘ sidering the features of development and application of the software，which are supervising and man— aging the developing process from the aspects of review，test，validation，documenting and technical status contr01．All the measures reach the goal of high reliability software development．
参考文献/References:
[1]郑人杰，殷人昆，陶永雷，等．实用软件T程[M]．北京：清
华大学出版社，2001．
[2]何国伟．可靠性试验技术[M]．北京：国防t业出版社，
2002．
[3]何国伟主编．软件可靠性[M]．北京：国防T业出版社，
1998．
[4]徐祖渊．航天型号软件研制管理[M]．Jtg：宇航出版社，
1999．
[5]朱明策．火箭发动机地面试验软件质量管理和控制[J]．
火箭推进，2005，31(2)：55—58．
相似文献/References:
[1]王一白,陆星宇,李 波,等.喷管分离流动模态转换过程壁压测量试验[J].火箭推进,2015,41(05):101.
WANG Yibai,LU Xingyu,LI Bo,et al.Test of wall pressure during transition of
flow separation modes in nozzle[J].Journal of Rocket Propulsion,2015,41(04):101.
[2]霍世慧,袁军社,徐学军,等.双推力室机架快速优化设计方法研究[J].火箭推进,2015,41(04):55.
HUO Shihui,YUAN Junshe,XU Xuejun,et al.A rapid optimization design method for frame structure
of double thrust chambers[J].Journal of Rocket Propulsion,2015,41(04):55.
[3]刘海丽,张立强,李学华,等.低比转速高速泵螺壳形式对性能影响分析[J].火箭推进,2015,41(03):52.
LIU Hai-li,ZHANG Li-qiang,LI Xue-hua,et al.Influence of volute case type for
low-specific-speed pump on pump performance[J].Journal of Rocket Propulsion,2015,41(04):52.
[4]沈传兵,苏 杭,朱子勇.基于PLC和WinCC的火箭发动机热真空试验控制系统[J].火箭推进,2015,41(03):93.
SHEN Chuan-bing,SU Hang,ZHU Zi-yong.Control system for liquid rocket engine heat-vacuum
test based on PLC and WinCC[J].Journal of Rocket Propulsion,2015,41(04):93.
[5]刘万龙,牛向楠,李全令,等.一种姿轨控发动机地面试验控制系统设计[J].火箭推进,2015,41(02):114.
LIU Wan-long,NIU Xiang-nan,LI Quan-ling,et al.Design of a ground test control system for attitude
and orbital control engine[J].Journal of Rocket Propulsion,2015,41(04):114.
[6]段文浩,于 涛,杨 莹.辐射式热流测量系统及其应用[J].火箭推进,2014,40(01):85.
DUAN Wen-hao,YU Tao,YANG Ying.Radiant heat flux measuring system and its application[J].Journal of Rocket Propulsion,2014,40(04):85.
[7]刘海娃.一种姿控动力装置热防护研究[J].火箭推进,2014,40(05):37.
LIU Hai-wa.Investigation of thermal protection for attitude control propulsion device[J].Journal of Rocket Propulsion,2014,40(04):37.
[8]朱子环,耿卫国,管 理,等.某型号大推力火箭发动机试验推力测量不确定度评定[J].火箭推进,2012,38(05):81.
ZHU Zi-huan,GENG Wei-guo,GUAN Li,et al.Assessment of thrust measurement uncertainty for test of large thrust rocket engine[J].Journal of Rocket Propulsion,2012,38(04):81.
[9]周奎,吴伟亮,张玫宝.火箭发动机喷雾均匀性数值分析[J].火箭推进,2010,36(02):26.
Zhou Kui,Wu Weiliang,Zhang Meibao.Numerical analysis on uniformity of spray in rocket engines[J].Journal of Rocket Propulsion,2010,36(04):26.
[10]李志勋,田健江,张彤.姿控发动机试验热流参数测量系统设计[J].火箭推进,2010,36(02):53.
Li Zhixun,Tian Jianjiang,Zhang Tong.Design of heat flux measurement system of attitude control engine tests[J].Journal of Rocket Propulsion,2010,36(04):53.
备注/Memo
收稿日期：2007-07—26；修回日期：2007—10-23。 作者简介：蒋瑜(1973一)，男，工程师，研究领域为液体火箭发动机试验测控技术。
更新日期/Last Update:
1900-01-01