PDF下载 分享
[1]张锋,仲伟聪.膜冷却推力室传热计算研究[J].火箭推进,2009,35(04):34-37.
　Zhang Feng,Zhong Weicong.Computational investigation of heat transfer for film cooling thrust chamber[J].Journal of Rocket Propulsion,2009,35(04):34-37.
点击复制

膜冷却推力室传热计算研究

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 35 期数: 2009年04期 页码: 34-37 栏目: 研究与设计 出版日期: 2009-08-28
Title:
Computational investigation of heat transfer for film cooling thrust chamber
作者:
张锋; 仲伟聪
西安航天动力研究所，陕西西安710100
Author(s):
Zhang Feng; Zhong Weicong
Xi'an Aerospace Propulsion Institute，Xi'an 710100，China
关键词:
推力室; 膜冷却; 传热计算
Keywords:
thrust chamber; film cooling; heat transfer
分类号:
V434
文献标志码:
A
摘要:
介绍了推力室液膜冷却机理．并对膜冷却相关研究进行了综述，在总结已有研 究成果的基础上建立了一套液膜冷却推力室传热计算模型。采用该模型对某液膜冷却推力室 进行了传热计算，地面试车测量值与壁温计算值基本一致。
Abstract:
This paper introduced the mechanism and research status of film cooling．A heat transfer computational model for liquid film cooling thrust chamber was established．The model Was used to perform a calculation of the heat transfer in a liquid film cooling thrust chamber．The calculated results agree well with the experimental data．

参考文献/References:

[1]中国质量协会编著．全面质量管理基本知识(第一版) [M]．中国经济出版社．2002，4．
[2]邢文英．QC小组基础教程[M]．北京：原子能出版社， 1998．
[3]冶军．美国镍基高温合金[M]．北京：科学出版社，1978．
[4]高温合金金相图谱编写组．高温合金金相图谱[M]．北 京：冶金工业出版社．1979．
[5]锻件质量分析编写组．锻件质量分析[M]．北京：机械 工业出版社．1983．

相似文献/References:

[1]周 伟.某膨胀循环发动机推力室冷却结构流场仿真分析[J].火箭推进,2015,41(02):63.
　ZHOU Wei.Flow field simulation analysis of cooling configuration in thrust chamber of an expander cycle engine[J].Journal of Rocket Propulsion,2015,41(04):63.
[2]郭灿琳,卢 钢,陈建华,等.喷嘴式隔板与纵向肋式隔板阻尼效应分析[J].火箭推进,2013,39(03):32.
　GUO Can-lin,LU Gang,CHEN Jian-hua,et al.Analysis on damping effect of vibration baffles with protruded injectors and longitudinal ribs[J].Journal of Rocket Propulsion,2013,39(04):32.
[3]孙永奇,李宝荣,杨建文.上面级发动机推力室喷管延伸段气膜冷却研究[J].火箭推进,2013,39(04):13.
　SUN Yong-qi,LI Bao-rong,YANG Jian-wen.Research on gas film cooling at nozzle extension section of thrust chamber for upper stage engine[J].Journal of Rocket Propulsion,2013,39(04):13.
[4]高翔宇,孙纪国,田 原.缩比推力室甲烷传热试验研究[J].火箭推进,2013,39(04):19.
　GAO Xiang-yu,SUN Ji-guo,TIAN Yuan.Experimental study on methane heat transfer test system[J].Journal of Rocket Propulsion,2013,39(04):19.
[5]燕 珂,单世群,王莉红,等.液体推进剂热稳定性研究方法探讨[J].火箭推进,2014,40(02):90.
　ZHANG Meng-zheng,LI-Bin,LU Yuan-yuan.Thinking about thrust and resistance characteristics of RBCC power system adapting to rectangle section flow passage[J].Journal of Rocket Propulsion,2014,40(04):90.
[6]宣智超,刘中祥,齐 戎.膨胀循环发动机推力室传热优化[J].火箭推进,2012,38(06):8.
　XUAN Zhi-chao,LIU Zhong-xiang,QI Rong.Heat transfer optimization of thrust chamber in expansion cycle engine[J].Journal of Rocket Propulsion,2012,38(04):8.
[7]李 强,聂 嵩,刘业奎,等.过氧化氢/煤油发动机推力室气液燃烧数值模拟[J].火箭推进,2011,37(04):35.
　LI Qiang,NIE Song,LIU Ye-kui,et al.Numerical simulation of combustion characteristicsfor thrust chamber in hydrogen peroxide/kerosene engine[J].Journal of Rocket Propulsion,2011,37(04):35.
[8]周红玲,等.国内外卫星用液体远地点发动机发展综述[J].火箭推进,2011,37(05):1.
　ZHOU Hong-ling,JIANG Wen-long,et al.Development of liquid apogee engine for satellite at home and abroad[J].Journal of Rocket Propulsion,2011,37(04):1.
[9]李丹琳,栾叶君,孙纪国.液氧/甲烷气液喷注器试验研究[J].火箭推进,2010,36(04):59.
　Experimental investigation on LOX/CH4 subscale thrust chamber[J].Journal of Rocket Propulsion,2010,36(04):59.
[10]杜大华,吴静杰,段捷.液体火箭发动机推力室极限承载能力研究[J].火箭推进,2010,36(05):40.
　DU Da-hua,WU Jing-jie,DUAN Jie.Analysis of loading limit of the LRE thrust chamber[J].Journal of Rocket Propulsion,2010,36(04):40.

备注/Memo

收稿日期：2009—03—17；修回日期：2009—04—14。 作者简介：张锋(198l一)，男，工程师，研究领域为液体火箭发动机传热。

更新日期/Last Update: 1900-01-01