PDF下载 分享
[1]于海磊,陈锋,郑勤生,等.低温推进剂液位监测系统设计[J].火箭推进,2010,36(03):54-57.
 Yu Hailei,Chen Feng,Zheng Qinsheng,et al.Design of monitoring system for cryogenic propellant level[J].Journal of Rocket Propulsion,2010,36(03):54-57.
点击复制

低温推进剂液位监测系统设计

参考文献/References:

[1]臧春喜, 耿卫国, 郑勤生. 低温推进剂液位测量技术研究[C]. 第八届全国低温工程大会暨中国航天低温专业信息网, 2007. [2]王际强. 几种低温液体液位的测量方法[J]. 深冷技术, 2007, (4): 37-39. [3]马礼耀, 汤维维, 张玉清. 低温流量测量系统[J]. 低温工程, 1983, (3): 22-24. [4]杜玉清, 鲁雪生. 低温储罐电容液位计设计[J]. 低温超导, 2004, 32(1): 9-11. [5]吴江, 刘立强, 张亮. 低温工质液位与流量的热式测量方法的研究[J]. 低温与特气, 2000, (3): 8-10. [6]何彤, 范明军. 串列式电容液位计的测量原理分析[J]. 计量技术, 2006, (5): 14-16.

相似文献/References:

[1]郑 伟,李护林,陈新红.激光快速成形技术在液体动力领域的应用前景[J].火箭推进,2015,41(06):1.
 ZHENG Wei,LI Hulin,CHEN Xinhong.Application prospect of laser rapid prototyping technology in the field of liquid power[J].Journal of Rocket Propulsion,2015,41(03):1.
[2]郭 敬,宋晶晶,孔凡超.发动机推进剂增压输送系统建模仿真技术综述[J].火箭推进,2015,41(05):1.
 GUO Jing,SONG Jingjing,KONG Fanchao.Overview of modeling and simulation technology for propellant pressurization feed system of liquid rocket engine[J].Journal of Rocket Propulsion,2015,41(03):1.
[3]于 康,谢荣华,陈晓江.表面张力贮箱电子束焊接工艺研究[J].火箭推进,2015,41(05):89.
 YU Kang,XIE Ronghua,CHEN Xiaojiang.Study on electron beam welding process for surface tension tank[J].Journal of Rocket Propulsion,2015,41(03):89.
[4]刘中华,苏 晨,汪军安,等.气路膜片设计研究[J].火箭推进,2015,41(05):95.
 LIU Zhonghua,SU Chen,WANG Junan,et al.Design and study of pneumatic diaphragm in gas circuit[J].Journal of Rocket Propulsion,2015,41(03):95.
[5]薛 薇,蔡震宇,曹红娟,等.基于可视化平台的液氢/液氧火箭发动机核心部件质量计算[J].火箭推进,2015,41(04):61.
 XUE wei,CAI Zhenyu,CAO Hongjuan,et al.Mass calculation of key assembly units in LH2/ LOX rocket engine based on visual interface[J].Journal of Rocket Propulsion,2015,41(03):61.
[6]穆朋刚,童 飞,蒲光荣,等.温度对贮箱增压系统的影响分析[J].火箭推进,2015,41(04):74.
 MU Penggang,TONG Fei,PU Guangrong,et al.Influence of temperature on tank pressurization system[J].Journal of Rocket Propulsion,2015,41(03):74.
[7]高朝辉,刘 宇,肖 肖,等.垂直着陆重复使用运载火箭对动力技术的挑战[J].火箭推进,2015,41(03):1.
 GAO Zhao-hui,LIU Yu,et al.Challenge to propulsion technology for vertical landing reusable launch vehicle[J].Journal of Rocket Propulsion,2015,41(03):1.
[8]申智帅,等.气动增压器技术及其在空间推进系统的应用[J].火箭推进,2015,41(03):15.
 SHEN Zhi-shuai,RUAN Hai-jun,et al.Pneumopump technology and its application in space propulsion system[J].Journal of Rocket Propulsion,2015,41(03):15.
[9]张 翔,徐洪平,安雪岩,等.液体火箭发动机稳态运行故障 数据聚类分析研究0[J].火箭推进,2015,41(02):118.
 ZHANG Xiang,XU Hong-ping,AN Xue-yan,et al.Clustering analysis for fault data in steady process of liquid propellant rocket engine[J].Journal of Rocket Propulsion,2015,41(03):118.
[10]窦 唯,闫宇龙,金志磊,等.某发动机涡轮泵转子高温超速/疲劳试验研究[J].火箭推进,2015,41(01):15.
 DOU Wei,YAN Yu-long,JIN Zhi-lei,et al.Fatigue experiment of turbo-pump rotor at over-speed and high temperature condition[J].Journal of Rocket Propulsion,2015,41(03):15.
[11]杨永强,刘站国,徐浩海,等.液氧煤油发动机低温组元两相充填过程研究[J].火箭推进,2006,32(02):11.
 Yang Yongqiang,Liu Zhanguo,Xu Haohai.Research on two-phase filling process of cryogenic propellant for a LOX/Kerosene LRE[J].Journal of Rocket Propulsion,2006,32(03):11.

备注/Memo

收稿日期:2009-12-23;修回日期:2010-01-17。
作者简介: 于海磊(1982—),男,硕士,研究领域为液体火箭发动机地面试验测控技术和虚拟试验技术。

更新日期/Last Update: 1900-01-01