航天推进技术研究院主办
YANG Zhen-ning,ZHANG Feng,ZHOU Jun.Study on heat transfer of a FSO pintle injector engine head[J].Journal of Rocket Propulsion,2010,36(06):6-10.
面关机针栓式喷注器发动机头部传热分析
- Title:
- Study on heat transfer of a FSO pintle injector engine head
- 文章编号:
- 1672-9374(2010)06-0006-05
- Keywords:
- pintle injector; propellant; analysis of heat transfer
- 分类号:
- V434-34
- 文献标志码:
- A
- 摘要:
- 对面关机针栓式喷注器发动机头部的传热情况进行了分析建模,应用数值方法分别计算了发动机在工作过程和关机后头部集液腔内推进剂温度的瞬态变化情况。计算结果表明,发动机在工作过程中头部集液腔中的推进剂温升很小,关机后推进剂有不超过200℃的温升。从计算结果来看,头部的推进剂处于安全的温度范围内。
- Abstract:
- In this paper, the heat transfer condition of a FSO(Face Shut Off) pintle injector engine head is analyzed and modeled with numerical method. The instantaneous temperature states of the propellant in the engine head during working and shut-off states are computed. The results show that the rise amplitude of the propellant temperature is small when the engine is at work, and the propellant temperature rises less than 200℃ after the engine is shut-off. The conclusions above show that the propellant in the engine head is at a safe temperature range.
参考文献/References:
[1] 张育林. 变推力液体火箭发动机及其控制技术[M]. 北京:国防工业出版社, 2001. [2] 岳春国, 李进贤, 冯喜平, 等. 针栓式变推力火箭发动机技术现状与发展探索[J]. 世界科技研究与发展, 2008, 30(5): 609-612. [3] DRESSLER Gordon, BAUER J Martin. TRW pintle engine heritage and performance characteristics, AIAA 2000- 3871 [R]. USA: AIAA, 2000. [4] ELVERUM G W, STAUDHAMMER P, MILLER J, et al. The descent engine for the lunar module, AIAA 67-521[R]. USA: AIAA, 1967. [5] MUELLER Tom, DRESSLER Gordon. TRW 40 K1bfLOX /RP-1 low cost pintle engine test results, AIAA 2000-3863[R]. USA: AIAA, 2000. [6] GAVITTETC K. Testing of the 650 K1bf LOX/LH2 low cost p intle engine(LCPE), AIAA 2001-3987[R]. USA: AIAA, 2001. [7] GAVITTETC K. TRW LCPE 650 k1bf LOX/LH2 low test results, A IAA2000-3853 [R]. USA: AIAA, 2000. [8] AUSTIN B, HEISTER S. Characterization of pintle engine performance for nontoxic hypergolic bipropellants, AIAA 2002-4029 [R]. USA: AIAA, 2002. [9] 杨世铭, 陶文铨 编著. 传热学[M]. 北京: 高等教育出版社, 1998. [10] 皮茨D, 西索姆L. 传热学[M]. 葛新石, 译. 北京: 科学出版社, 2002. [11] 巴伦 I. 纯物质热化学数据手册[M]. 程乃良, 牛四通, 徐桂英, 等译. 北京: 科学出版社, 2003. [12] 周海清, 尤政, 张平. 颗粒传热增强对微型脉冲推力点火过程的影响[J]. 固体火箭技术, 2006, 29 (3): 31-34.
相似文献/References:
[1]张小平,丁丰年,马杰.我国载人登月重型运载火箭动力系统探讨[J].火箭推进,2009,35(02):1.
Zhang Xiaoping,Ding Fengnian,Ma Jie.Scheme of Chinese manned lunar
rocket and its propulsion system[J].Journal of Rocket Propulsion,2009,35(06):1.
[2]甄江涛,刘江强,徐超,等.肼一70胶体推进剂的特性及制备方法[J].火箭推进,2008,34(02):59.
Zhen Jiangtao,Liu Jiangqiang,Xu Chao,et al.Properties and preparation of gel propellant H-70[J].Journal of Rocket Propulsion,2008,34(06):59.
[3]贾月,张浩,李亚.一氧化二氮无毒推进剂催化分解研究[J].火箭推进,2008,34(03):49.
Jia Yue,Zhang Hao,Li Ya.Research on catalytic decomposition of
green propellant N20[J].Journal of Rocket Propulsion,2008,34(06):49.
[4]庞军,蔚红建,刘小刚,等.碳纤维对低特征信号XLDB推进剂力学性能影响的初步研究[J].火箭推进,2005,31(03):23.
Pang Jun,Yu Hongjian,Liu Xiaogang,et al.Influences of carbon fiber on mechanical characteristics of minimum signature XLDB propellant[J].Journal of Rocket Propulsion,2005,31(06):23.
[5]李斌,张小平,高玉闪.我国可重复使用液体火箭发动机发展的思考[J].火箭推进,2017,43(01):1.
LI Bin,ZHANG Xiaoping,GAO Yushan.Consideration on development of reusable liquid rocket engine in China[J].Journal of Rocket Propulsion,2017,43(06):1.
[6]俞南嘉,鲍启林,张 洋,等.针栓式液氧/煤油发动机燃烧数值仿真[J].火箭推进,2018,44(04):23.
YU Nanjia,BAO Qilin,ZHANG Yang,et al.Numerical simulation of combustion for LOX/kerosene engine with pintle injector[J].Journal of Rocket Propulsion,2018,44(06):23.
[7]常建,赖建伟,王斌,等.基于加速热老化的固体推进剂燃烧热值变化规律试验[J].火箭推进,2024,50(03):102.[doi:10.3969/j.issn.1672-9374.2024.03.011]
CHANG Jian,LAI Jianwei,WANG Bin,et al.Experimental investigation on calorific value of HTPB propellant based on high temperature accelerated aging test[J].Journal of Rocket Propulsion,2024,50(06):102.[doi:10.3969/j.issn.1672-9374.2024.03.011]
备注/Memo
收稿日期:2010-10-15;修回日期:2010-11-03
作者简介: 杨振宁(1978—),男,硕士,研究领域为航空宇航推进理论与工