航天推进技术研究院主办
PAN Hui,ZHANG Li-hui.Application of AMESim in dynamic characteristic simulation of liquid rocket engine system[J].Journal of Rocket Propulsion,2011,37(03):6-11.
AMESim软件在液体火箭发动机系统动态仿真上的应用
- Title:
- Application of AMESim in dynamic characteristic simulation of liquid rocket engine system
- 文章编号:
- 1672-9374(2011)03-0006-06
- Keywords:
- liquid propellant rocket engine; AMESim; AMESet; dynamic characteristic; numerical simulation
- 分类号:
- V434-34
- 文献标志码:
- A
- 摘要:
- 根据模块化建模思想和通用仿真要求,利用AMESim中的AMESet平台二次开发出了发动机系统通用仿真模块库,并对不同类型发动机系统的动态特性进行了仿真。研究结果表明,建模过程简单明了,操作性及通用性强。通过计算结果与试车曲线对比,验证了所采用仿真方法的合理性和正确性。所做的工作为今后液体火箭发动机通用仿真研究打下了良好基础。
- Abstract:
- According to the modular modeling idea and general simulation requirements, a general engine system simulation module library was developed on the basis of the secondary development of the AMESet platform in AMESim. The dynamic characteristic simulation of different types of liquid rocket engine systems was conducted. The research results show that the modeling process is simple and feasible. The correctness and reliability of adopted simulation method were preliminarily validated through comparison of calculated results and testing curves. The research work lays a good foundation for the general simulation of future liquid rocket engine systems.
相似文献/References:
[1]郑 伟,李护林,陈新红.激光快速成形技术在液体动力领域的应用前景[J].火箭推进,2015,41(06):1.
ZHENG Wei,LI Hulin,CHEN Xinhong.Application prospect of laser rapid prototyping
technology in the field of liquid power[J].Journal of Rocket Propulsion,2015,41(03):1.
[2]郭 敬,宋晶晶,孔凡超.发动机推进剂增压输送系统建模仿真技术综述[J].火箭推进,2015,41(05):1.
GUO Jing,SONG Jingjing,KONG Fanchao.Overview of modeling and simulation technology
for propellant pressurization feed system
of liquid rocket engine[J].Journal of Rocket Propulsion,2015,41(03):1.
[3]于 康,谢荣华,陈晓江.表面张力贮箱电子束焊接工艺研究[J].火箭推进,2015,41(05):89.
YU Kang,XIE Ronghua,CHEN Xiaojiang.Study on electron beam welding process
for surface tension tank[J].Journal of Rocket Propulsion,2015,41(03):89.
[4]刘中华,苏 晨,汪军安,等.气路膜片设计研究[J].火箭推进,2015,41(05):95.
LIU Zhonghua,SU Chen,WANG Junan,et al.Design and study of pneumatic diaphragm in gas circuit[J].Journal of Rocket Propulsion,2015,41(03):95.
[5]薛 薇,蔡震宇,曹红娟,等.基于可视化平台的液氢/液氧火箭发动机核心部件质量计算[J].火箭推进,2015,41(04):61.
XUE wei,CAI Zhenyu,CAO Hongjuan,et al.Mass calculation of key assembly units in
LH2/ LOX rocket engine based on visual interface[J].Journal of Rocket Propulsion,2015,41(03):61.
[6]穆朋刚,童 飞,蒲光荣,等.温度对贮箱增压系统的影响分析[J].火箭推进,2015,41(04):74.
MU Penggang,TONG Fei,PU Guangrong,et al.Influence of temperature on tank pressurization system[J].Journal of Rocket Propulsion,2015,41(03):74.
[7]高朝辉,刘 宇,肖 肖,等.垂直着陆重复使用运载火箭对动力技术的挑战[J].火箭推进,2015,41(03):1.
GAO Zhao-hui,LIU Yu,et al.Challenge to propulsion technology for vertical
landing reusable launch vehicle[J].Journal of Rocket Propulsion,2015,41(03):1.
[8]申智帅,等.气动增压器技术及其在空间推进系统的应用[J].火箭推进,2015,41(03):15.
SHEN Zhi-shuai,RUAN Hai-jun,et al.Pneumopump technology and its application
in space propulsion system[J].Journal of Rocket Propulsion,2015,41(03):15.
[9]张 翔,徐洪平,安雪岩,等.液体火箭发动机稳态运行故障
数据聚类分析研究0[J].火箭推进,2015,41(02):118.
ZHANG Xiang,XU Hong-ping,AN Xue-yan,et al.Clustering analysis for fault data in steady process of
liquid propellant rocket engine[J].Journal of Rocket Propulsion,2015,41(03):118.
[10]窦 唯,闫宇龙,金志磊,等.某发动机涡轮泵转子高温超速/疲劳试验研究[J].火箭推进,2015,41(01):15.
DOU Wei,YAN Yu-long,JIN Zhi-lei,et al.Fatigue experiment of turbo-pump rotor at
over-speed and high temperature condition[J].Journal of Rocket Propulsion,2015,41(03):15.
[11]付军锋,赵凤红.膨胀循环液体火箭发动机推力调节阀仿真研究[J].火箭推进,2013,39(06):12.
FU Jun-feng,ZHAO Feng-hong.Simulation of thrust regulating valve of expansion cycle liquid rocket engine[J].Journal of Rocket Propulsion,2013,39(03):12.
备注/Memo
收稿日期:2010-10-19;修回日期:2010-12-27
作者简介: 潘辉(1984—),女,硕士研究生,研究领域为液体火箭发动机系统