航天推进技术研究院主办
[1]于 捷,杜方平.刀具移距在诱导轮叶片加工中的作用[J].火箭推进,2011,37(04):54-58.
YU Jie,DU Fang-ping.Application of cutter travel distance in inducer blade milling[J].Journal of Rocket Propulsion,2011,37(04):54-58.
点击复制
YU Jie,DU Fang-ping.Application of cutter travel distance in inducer blade milling[J].Journal of Rocket Propulsion,2011,37(04):54-58.
刀具移距在诱导轮叶片加工中的作用
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
37
期数:
2011年04期
页码:
54-58
栏目:
工艺与材料
出版日期:
2011-08-15
- Title:
- Application of cutter travel distance in inducer blade milling
- 文章编号:
- 1672-9374(2011)04-0054-05
- 分类号:
- V434-34
- 文献标志码:
- A
- 摘要:
- 通过数学方法，推导出诱导轮铣加工叶片时刀具移距的计算公式，解决了诱导轮叶片加工过程中产生根切、顶切的问题。以某型号发动机涡轮泵诱导轮为例，给出了工艺流程和加工参数。加工出的产品经水力试验和地面热试车及飞行考验，完全满足设计要求，表明该工艺方法正确，工艺参数可行有效。该工艺技术还可推广用于航空、航天以及民用涡轮泵诱导轮的加工领域。
- Abstract:
- The calculation formula of cutter tranvel distance during inducer blade milling was derived by mathematic method. It solved the problems of undercutting and top-cutting in the process of inducer blade milling. Taking the inducer of turbopump in a certain space engine for example, the process flow and machining parameters of the inducer are presented. The product made with the proposed process and parameters was proved through hydraulic test, ground hot firing and flight mission. The results indicate that the product can completely satisfy the design requirements, and the proposed process and parameters are correct and effective. The process mentioned
参考文献/References:
[1]朱宁昌, 董锡鉴, 马贻侯, 等. 液体火箭发动机设计[M]. 北京: 宇航出版社, 1994.
[2]黄春峰, 赖传兴, 陈树全. 现代特种加工技术的发展[J]. 航空精密制造技术, 2001(6): 14-20.
[3]伊克敏, 朱元, 林中岳, 等.发动机制造技术[M]. 北京: 宇航出版社, 1991.
[4]关醒凡. 现代泵技术手册[M]. 北京: 宇航出版社, 1996.
[5]李华. 机械制造技术[M]. 北京: 高等教育出版社, 2000.
[6]关醒凡. 泵的理论与设计[M]. 北京: 机械工业出版社, 1987.
[7]郑修本. 机械制造工艺学[M]. 北京: 机械工业出版社, 1999.
[8]丁希宁, 梁武科. 等螺距诱导轮的理论分析与数值模拟[J]. 甘肃: 机械研究与应用, 2009 (1): 41-43.
[9]郭晓梅, 李增芳, 王铁流, 等. 基于Pro /E诱导轮三维造型的研究与应用[J]. 黑龙江: 煤矿机械, 2009(3): 174-176.
[10]郭晓梅. 污水泵CAD、三维造型及流场分析一体化[D]. 镇江: 江苏大学, 2002.
相似文献/References:
[1]唐 飞,李家文,李 永,等.热力学效应对低温诱导轮旋转汽蚀影响的数值研究[J].火箭推进,2013,39(02):29.
TANG Fei,LI Jia-wen,LI Yong,et al.Influence of thermodynamics effect on inducer rotating cavitation under low temperature condition[J].Journal of Rocket Propulsion,2013,39(04):29.
[2]唐 飞,李家文,李 永,等.提高液体火箭发动机诱导轮汽蚀性能的研究[J].火箭推进,2013,39(03):44.
TANG Fei,LI Jia-wen,LI Yong,et al.Study on improving cavitation performance of inducer for liquid rocket engine[J].Journal of Rocket Propulsion,2013,39(04):44.
[3]张翠儒,宋 勇,毋 杰,等.一种平板螺旋式诱导轮的扬程计算法[J].火箭推进,2013,39(05):51.
ZHANG Cui-ru,SONG Yong,WU Jie,et al.A calculation method of delivery lift of flat-plate helical inducer[J].Journal of Rocket Propulsion,2013,39(04):51.
[4]史 勇,何卫东,卢 博.插铣技术在诱导轮加工中的应用[J].火箭推进,2014,40(01):76.
SHI Yong,HE Wei-dong,LU Bo.Application of plunge milling in inducer machining[J].Journal of Rocket Propulsion,2014,40(04):76.
[5]庄宿国,罗 鹏,侯宁涛,等.基于Pro/E平台的诱导轮参数化造型软件开发[J].火箭推进,2014,40(03):68.
ZHUANG Su-guo,LUO Peng,HOU Ning-tao,et al.Parametrization sculpting software development
for inducer based on Pro/E[J].Journal of Rocket Propulsion,2014,40(04):68.
[6]叶汉玉,李家文,李 欣.诱导轮旋转汽蚀数值模拟[J].火箭推进,2014,40(04):43.
YE Han-yu,LI Jia-wen,LI Xin.Numerical simulations of rotating cavitation in inducer[J].Journal of Rocket Propulsion,2014,40(04):43.
[7]侯 杰,于海力,杨 敏.低汽蚀余量高速泵诱导轮研究[J].火箭推进,2014,40(06):16.
HOU Jie,YU Hai-li,YANG Min.Study of inducers for low-NPSHr high-speed pumps[J].Journal of Rocket Propulsion,2014,40(04):16.
[8]宋沛原,李家文,唐 飞.轮毂形状对诱导轮性能的影响[J].火箭推进,2012,38(02):38.
SONG Pei-yuan,LI Jia-wen,TANG Fei.Effect of hub shape on performance of inducer[J].Journal of Rocket Propulsion,2012,38(04):38.
[9]褚宝鑫,须 村,张晓娜,等.诱导轮空化对流固耦合应力分析的影响[J].火箭推进,2012,38(02):44.
CHU Bao-xin,XU Cun,ZHANG Xiao-na,et al.Influence of inducer cavitation on fluid-solid coupled stress analysis[J].Journal of Rocket Propulsion,2012,38(04):44.
[10]唐 飞,李家文.诱导轮平面叶栅汽蚀不稳定现象的数值分析[J].火箭推进,2011,37(01):34.
TANG Fei,LI Jia-wen.Numerical analysis of instable cavitation phenomenon in 2D blade cascade of inducer[J].Journal of Rocket Propulsion,2011,37(04):34.
备注/Memo
收稿日期：2011-03-24；修回日期：2011-04-12
作者简介：于捷（1969—），女，高级工程师，研究领域为涡轮泵机加和装配
更新日期/Last Update:
1900-01-01