航天推进技术研究院主办
[1]褚宝鑫,须 村,张晓娜,等.诱导轮空化对流固耦合应力分析的影响[J].火箭推进,2012,38(02):44-48.
CHU Bao-xin,XU Cun,ZHANG Xiao-na,et al.Influence of inducer cavitation on fluid-solid coupled stress analysis[J].Journal of Rocket Propulsion,2012,38(02):44-48.
点击复制
CHU Bao-xin,XU Cun,ZHANG Xiao-na,et al.Influence of inducer cavitation on fluid-solid coupled stress analysis[J].Journal of Rocket Propulsion,2012,38(02):44-48.
诱导轮空化对流固耦合应力分析的影响
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
38
期数:
2012年02期
页码:
44-48
栏目:
研究与设计
出版日期:
2012-04-15
- Title:
- Influence of inducer cavitation on fluid-solid coupled stress analysis
- 文章编号:
- 1672-9374(2012)02-0044-05
- 分类号:
- V434.21-34
- 文献标志码:
- A
- 摘要:
- 采用ANSYS FLUENT软件仿真计算了某型号液体火箭发动机诱导轮在空化情况下的流场压力分布情况，之后将其流体压力分布引入ANSYS Workbench中，利用单向流固耦合技术进行了该诱导轮的有限元静应力分析，获取了空化及非空化情况下诱导轮的叶片应力分布，分析了空化对诱导轮应力分析结果的影响。
- Abstract:
- ANSYS FLUENT software was used to calculate the flow pressure distribution of a
参考文献/References:
[1]丛小青, 钱玉琴, 袁丹青. 高速泵诱导轮静应力及模态分析[J]. 中国农村水利水电, 2010 (11): 135-137.
[2]陈晖, 李斌, 张恩昭, 等. 诱导轮空化流动数值模拟[J].流体机械, 2007, 35(1): 21-28.
[3]刘志远, 郑源, 张文佳, 等. ANSYS-CFX单向流固耦合分析的方法[J]. 水利水电工程设计, 2009, 28(2): 29-31.
[4]张惟斌, 赖喜德, 王建录, 等. 基于流固耦合的主油泵转子结构分析[J]. 水泵技术, 2009 (5): 15-18.
[5]袁丹青, 刘吉春, 丛小青, 等. 变螺距诱导轮内流场空化数值计算[J]. 排灌机械, 2008, 26(5): 42-45.
[6]HIROKI U. Numerical simulation of cavitating flow in inducers, AIAA-2004-4024[R]. USA: AIAA, 2004.
[7]KIMURA T. CFD simulation of a turbopump inducer, AIAA2003-4770[R]. USA: AIAA, 2003.
[8]王和慧, 于莉, 周金水, 等. 希罗装置复杂通道的CFD仿真和FE分析设计[J]. 工程力学, 2010, 27(5): 231-239.
相似文献/References:
[1]唐 飞,李家文,李 永,等.热力学效应对低温诱导轮旋转汽蚀影响的数值研究[J].火箭推进,2013,39(02):29.
TANG Fei,LI Jia-wen,LI Yong,et al.Influence of thermodynamics effect on inducer rotating cavitation under low temperature condition[J].Journal of Rocket Propulsion,2013,39(02):29.
[2]唐 飞,李家文,李 永,等.提高液体火箭发动机诱导轮汽蚀性能的研究[J].火箭推进,2013,39(03):44.
TANG Fei,LI Jia-wen,LI Yong,et al.Study on improving cavitation performance of inducer for liquid rocket engine[J].Journal of Rocket Propulsion,2013,39(02):44.
[3]张翠儒,宋 勇,毋 杰,等.一种平板螺旋式诱导轮的扬程计算法[J].火箭推进,2013,39(05):51.
ZHANG Cui-ru,SONG Yong,WU Jie,et al.A calculation method of delivery lift of flat-plate helical inducer[J].Journal of Rocket Propulsion,2013,39(02):51.
[4]史 勇,何卫东,卢 博.插铣技术在诱导轮加工中的应用[J].火箭推进,2014,40(01):76.
SHI Yong,HE Wei-dong,LU Bo.Application of plunge milling in inducer machining[J].Journal of Rocket Propulsion,2014,40(02):76.
[5]庄宿国,罗 鹏,侯宁涛,等.基于Pro/E平台的诱导轮参数化造型软件开发[J].火箭推进,2014,40(03):68.
ZHUANG Su-guo,LUO Peng,HOU Ning-tao,et al.Parametrization sculpting software development
for inducer based on Pro/E[J].Journal of Rocket Propulsion,2014,40(02):68.
[6]叶汉玉,李家文,李 欣.诱导轮旋转汽蚀数值模拟[J].火箭推进,2014,40(04):43.
YE Han-yu,LI Jia-wen,LI Xin.Numerical simulations of rotating cavitation in inducer[J].Journal of Rocket Propulsion,2014,40(02):43.
[7]侯 杰,于海力,杨 敏.低汽蚀余量高速泵诱导轮研究[J].火箭推进,2014,40(06):16.
HOU Jie,YU Hai-li,YANG Min.Study of inducers for low-NPSHr high-speed pumps[J].Journal of Rocket Propulsion,2014,40(02):16.
[8]宋沛原,李家文,唐 飞.轮毂形状对诱导轮性能的影响[J].火箭推进,2012,38(02):38.
SONG Pei-yuan,LI Jia-wen,TANG Fei.Effect of hub shape on performance of inducer[J].Journal of Rocket Propulsion,2012,38(02):38.
[9]唐 飞,李家文.诱导轮平面叶栅汽蚀不稳定现象的数值分析[J].火箭推进,2011,37(01):34.
TANG Fei,LI Jia-wen.Numerical analysis of instable cavitation phenomenon in 2D blade cascade of inducer[J].Journal of Rocket Propulsion,2011,37(02):34.
[10]张召磊,张 楠,窦 唯,等.诱导轮对高速离心泵性能的影响分析[J].火箭推进,2011,37(03):26.
ZHANG Zhao-lei,ZHANG Nan,DOU Wei,et al.Impact of inducer on characteristic of high-speed centrifugal pump[J].Journal of Rocket Propulsion,2011,37(02):26.
备注/Memo
收稿日期：2011-11-12；修回日期：2012-01-17
基金项目：国家高技术项目（2008AA702302）
作者简介：褚宝鑫（1977—），男，高级工程师，研究领域为液体火箭发动机涡轮泵技术
更新日期/Last Update:
1900-01-01