航天推进技术研究院主办
[1]闫 松,谭永华,陈建华.高压金属软管应力及参数敏感度分析[J].火箭推进,2013,39(05):60-64.
YAN Song,TAN Yong-hua,CHEN Jian-hua.Stress and parameter sensitivity analysis of high-pressure metal hose[J].Journal of Rocket Propulsion,2013,39(05):60-64.
点击复制
YAN Song,TAN Yong-hua,CHEN Jian-hua.Stress and parameter sensitivity analysis of high-pressure metal hose[J].Journal of Rocket Propulsion,2013,39(05):60-64.
高压金属软管应力及参数敏感度分析
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
39
期数:
2013年05期
页码:
60-64
栏目:
研究与设计
出版日期:
2013-10-31
- Title:
- Stress and parameter sensitivity analysis of high-pressure metal hose
- 文章编号:
- 1672-9374(2013)05-0060-05
- 分类号:
- V434-34
- 文献标志码:
- A
- 摘要:
- 某型号发动机热试车考核中高压金属软管多次出现破坏。通过建立软管有限元模型，采用非线性有限元分析了软管应力分布和各部分承载特点，判断波峰处轴向应力是影响软管结构强度的主要因素，有限元计算结果和试验破坏部位一致，表明有限元模型的合理性。在此基础上，通过参数化建模、设计中心复合实验和进行参数敏感度分析，得出影响波峰处最大轴向应力的敏感参数，为结构参数优化提供了依据。
- Abstract:
- Leakage happened to the high-pressure metal hose for several times in the hot test of a certain rocket engine. The stress distribution and bearing characteristics of the hose were analyzed with nonlinear FEM after the finite element model of the hose was established. It is found that the axial stress at the crown is the main factor affecting the strength of the hose. The results of the finite element calculation were consistent with the leakage position in the test, which shows that the finite element model is right. On this basis, through the parameterized modeling, the central composite experiment was designed, the parameter sensitivity analysis was performed, and the sensitive parameters affecting the maximal axial stress at the crown was acquired. The achievement can be used for optimization of structural parameters.
参考文献/References:
[1]葛子余. 金属软管[M]. 北京: 宇航出版社, 1985.
[2]李永生, 李建国. 波形膨胀节实用技术[M]. 北京: 化学工业出版社, 2000.
[3]ECKARDT D. Liquid rocket lines, bellows, flexible hoses, and filters, NASA-SP-8123[R]. USA: NASA, 1978.
[4]陈晔, 李永生, 顾伯勤, 等. 用ANSYS软件对U形波纹管的有限元分析[J]. 压力容器, 2000, 17(3): 34-36.
[5]贾志刚, 寿比南, 梅林涛. 有限元方法在膨胀节强度分析中的应用[J]. 压力容器, 2001, 18(4): 43-45.
[6]张兵, 王心丰. 用非线性有限元分析波纹管的稳定性[J]. 压力容器, 2001, 18(1): 40-44.
[7]杜金强, 朱伯伟, 王鹏, 等. 两种高压软管接头组件的非线性有限元对比分析[J]. 机械设计. 2010, 27(11): 83-86.
[8]杨义俊, 王心丰. 多层波纹管非线性有限元应力分析[J]. 压力容器, 2003, 20(9): 13-16.
[9]WILLIAMS D K. Catastrophic failure of flex hose bellows due to lateral offset & internal pressure[C]// 2007 ASME Pressure Vessels and Piping Division Conference. San Antonio, Texas: ASME, 2007:1-9.
[10]刘伟, 高维成, 于广滨, 等. ANSYS 12.0宝典[M]. 北京: 电子工业出版社, 2011.
[11]李永生. 波形膨胀节实用技术-设计、制造与应用[M]. 北京: 化学工业出版社, 2000.
[12]晏飞. 纤维缠绕/金属内衬复合材料气瓶应力分析[J]. 火箭推进, 2011, 37(1): 46-50.
[13]杨义俊. 基于ANSYS的金属软管非线性有限元应力分析[D]. 南京: 南京航空航天大学, 2004.
[14]孔凡超, 沈冰妹, 胡旭坤. 有限元分析在大推力火箭动力系统试验台承力架结构优化中的应用[J]. 火箭推进, 2011, 37(5): 41-46.
相似文献/References:
[1]沈继彬,曾晓军,曹庆红.泵前管道波纹管对推力测量的影响分析[J].火箭推进,2015,41(04):95.
SHEN Jibin,ZENG Xiaojun,CAO Qinghong.Analysis of effects of bellows in front of
pump on thrust measurement[J].Journal of Rocket Propulsion,2015,41(05):95.
[2]闫 松,谭永华,陈建华.波纹管流体诱导振动研究进展[J].火箭推进,2014,40(02):16.
YAN Song,TAN Yong-hua,CHEN Jian-hua.Research progress of flow-induced vibration of bellows[J].Journal of Rocket Propulsion,2014,40(05):16.
[3]何志勇,周云端.UG二次开发在波纹管设计中的应用[J].火箭推进,2010,36(03):33.
He Zhiyong,Zhou Yunduan.Design of bellows based on UG secondary development technique[J].Journal of Rocket Propulsion,2010,36(05):33.
备注/Memo
收稿日期：2013-03-１３；修回日期：2013-03-28
基金项目：中国航天科技集团公司支撑项目（2009JY03）
作者简介：闫松（1988—），男，硕士研究生，研究领域为液氧煤油发动机动力学
更新日期/Last Update:
1900-01-01