PDF下载 分享
[1]庄宿国,罗 鹏,侯宁涛,等.基于Pro/E平台的诱导轮参数化造型软件开发[J].火箭推进,2014,40(03):68-72.
　ZHUANG Su-guo,LUO Peng,HOU Ning-tao,et al.Parametrization sculpting software development for inducer based on Pro/E[J].Journal of Rocket Propulsion,2014,40(03):68-72.
点击复制

基于Pro/E平台的诱导轮参数化造型软件开发

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 40 期数: 2014年03期 页码: 68-72 栏目: 研究与设计 出版日期: 2014-06-27
Title:
Parametrization sculpting software development for inducer based on Pro/E
作者:
庄宿国; 罗 鹏; 侯宁涛; 杨霞辉
西安航天动力研究所，陕西 西安 710100
Author(s):
ZHUANG Su-guo;  LUO Peng;  HOU Ning-tao;  Yang Xia-hui
Xi’an Aerospace Propulsion Institute, Xi’an 710100, China
关键词:
诱导轮; 三维造型; 参数化; 软件开发
Keywords:
inducer;  three-dimensional sculpting;  parametrization;  software development
分类号:
V434-34
文献标志码:
A
摘要:
阐述了诱导轮参数化三维造型的意义和现状，应用自主开发的PIND-2D软件进行诱导轮的二维水力设计，并分析了诱导轮三维造型结构特点。在此基础上，采用C++编程语言，在Pro/TOOLKIT环境下对Pro/E进行二次开发，并采用动态链接库方法实现程序与Pro/E和MFC之间的数据接口，成功开发出了诱导轮参数化三维造型软件，提高了诱导轮设计的效率和质量。
Abstract:
The significance and the current situation of the three-dimensional parametrization sculpting for inducer are illustrated. The two-dimensional hydraulic drawing of inducer was designed by PIND-2D which had been developed independently. The structural features of three-dimensional sculpting of inducer were analyzed. On this basis, the secondary development of Pro/E was executed by means of VC++ programming language under the condition of Pro/TOOLKIT environment. The program data interface between Pro/E and MFC was realized by using DLL, and then the three-dimensional parametrization sculpting software of inducer was successfully developed. The efficiency and quality of inducer's design were promoted.

参考文献/References:

[1]庄宿国. 诱导轮设计方法及其在船用泵的应用[D]. 镇江: 江苏大学, 2012.
[2]关醒凡. 现代泵技术手册[M]. 北京: 宇航出版社, 1995.
[3]刘厚林, 庄宿国, 俞志君, 等. JW200-1000-315型离心泵诱导轮设计[J]. 华中科技大学学报（自然科学版）, 2011, 39(12): 14-17.
[4]朱祖超. 低比转速高速离心泵的理论与设计[M]. 北京: 机械工业出版社, 2007．
[5]FUJII A, MIZUNO S, HORIGUCHI H, et al．A method for the suppression of rotating cavitation by an accumu- lator at the inlet of an inducer [J]. Journal of Fluid Science and Technology, 2008, 3(7): 838-845.
[6]YOSHIDA Y, TSUJIMOTO Y, KATAOKA D, et al. Effects of alternate leading edge cutback on unsteady cavitation in 4-bladed inducers[J]. Journal of Fluids Engineering-Transactions of the ASME, 2001, 123(4): 762-770.
[7]张涛. 诱导轮CAD优化设计及内部三维流场分析 [D]. 镇江：江苏大学, 2003.
[8]郭晓梅, 李增芳, 王铁流, 等． 基于Pro/E诱导轮三维造型的研究与应用[J]. 煤矿机械, 2009, 30(3): 174-176.
[9]李世国. Pro/TOOLKIT程序设计[M]. 北京: 机械工业出版社, 2003.
[10]庄宿国, 刘厚林, 俞志君, 等. 诱导轮水力设计及其CAD软件开发[J]. 流体机械, 2011, 39(7): 50-54．
[11]张继春. Pro/ENGINEER二次开发实用教程[M]. 北京: 北京大学出版社, 2003.
[12]吴贤芳, 谈明高, 刘敏, 等. 双流道泵叶轮参数化三维造型[J]. 中国农村水利水电, 2009 (11): 103-106.
[13]刘厚林, 谈明高. 双流道泵[M]. 镇江: 江苏大学出版社, 2012.
[14]刘敏. 泵的参数化三维造型及其软件开发[D]. 镇江: 江苏大学, 2006.

相似文献/References:

[1]唐 飞,李家文,李 永,等.热力学效应对低温诱导轮旋转汽蚀影响的数值研究[J].火箭推进,2013,39(02):29.
　TANG Fei,LI Jia-wen,LI Yong,et al.Influence of thermodynamics effect on inducer rotating cavitation under low temperature condition[J].Journal of Rocket Propulsion,2013,39(03):29.
[2]唐 飞,李家文,李 永,等.提高液体火箭发动机诱导轮汽蚀性能的研究[J].火箭推进,2013,39(03):44.
　TANG Fei,LI Jia-wen,LI Yong,et al.Study on improving cavitation performance of inducer for liquid rocket engine[J].Journal of Rocket Propulsion,2013,39(03):44.
[3]张翠儒,宋 勇,毋 杰,等.一种平板螺旋式诱导轮的扬程计算法[J].火箭推进,2013,39(05):51.
　ZHANG Cui-ru,SONG Yong,WU Jie,et al.A calculation method of delivery lift of flat-plate helical inducer[J].Journal of Rocket Propulsion,2013,39(03):51.
[4]史 勇,何卫东,卢 博.插铣技术在诱导轮加工中的应用[J].火箭推进,2014,40(01):76.
　SHI Yong,HE Wei-dong,LU Bo.Application of plunge milling in inducer machining[J].Journal of Rocket Propulsion,2014,40(03):76.
[5]叶汉玉,李家文,李 欣.诱导轮旋转汽蚀数值模拟[J].火箭推进,2014,40(04):43.
　YE Han-yu,LI Jia-wen,LI Xin.Numerical simulations of rotating cavitation in inducer[J].Journal of Rocket Propulsion,2014,40(03):43.
[6]侯 杰,于海力,杨 敏.低汽蚀余量高速泵诱导轮研究[J].火箭推进,2014,40(06):16.
　HOU Jie,YU Hai-li,YANG Min.Study of inducers for low-NPSHr high-speed pumps[J].Journal of Rocket Propulsion,2014,40(03):16.
[7]宋沛原,李家文,唐 飞.轮毂形状对诱导轮性能的影响[J].火箭推进,2012,38(02):38.
　SONG Pei-yuan,LI Jia-wen,TANG Fei.Effect of hub shape on performance of inducer[J].Journal of Rocket Propulsion,2012,38(03):38.
[8]褚宝鑫,须 村,张晓娜,等.诱导轮空化对流固耦合应力分析的影响[J].火箭推进,2012,38(02):44.
　CHU Bao-xin,XU Cun,ZHANG Xiao-na,et al.Influence of inducer cavitation on fluid-solid coupled stress analysis[J].Journal of Rocket Propulsion,2012,38(03):44.
[9]唐 飞,李家文.诱导轮平面叶栅汽蚀不稳定现象的数值分析[J].火箭推进,2011,37(01):34.
　TANG Fei,LI Jia-wen.Numerical analysis of instable cavitation phenomenon in 2D blade cascade of inducer[J].Journal of Rocket Propulsion,2011,37(03):34.
[10]张召磊,张 楠,窦 唯,等.诱导轮对高速离心泵性能的影响分析[J].火箭推进,2011,37(03):26.
　ZHANG Zhao-lei,ZHANG Nan,DOU Wei,et al.Impact of inducer on characteristic of high-speed centrifugal pump[J].Journal of Rocket Propulsion,2011,37(03):26.

备注/Memo

收稿日期：2013-11-15；修回日期：2013-12-02 基金项目：中国航天科技集团公司西安航天动力研究所创新基金项目（2013Da·YY4009Da） 作者简介：庄宿国（1986—），男，硕士，研究领域为机械密封设计

更新日期/Last Update: 1900-01-01