PDF下载 分享
[1]李 莹,潘宏亮,秦 飞,等.基于EASY5的液发系统建模与仿真可行性研究[J].火箭推进,2015,41(01):70-75.
　LI Ying,PAN Hong-liang,QIN Fei,et al.Feasibility study on EASY5-based modeling and simulation of liquid rocket engine[J].Journal of Rocket Propulsion,2015,41(01):70-75.
点击复制

基于EASY5的液发系统建模与仿真可行性研究

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 41 期数: 2015年01期 页码: 70-75 栏目: 研究与设计 出版日期: 2015-04-30
Title:
Feasibility study on EASY5-based modeling and simulation of liquid rocket engine
作者:
李 莹; 潘宏亮; 秦 飞; 魏祥庚
西北工业大学 燃烧、热结构与内流场重点实验室，陕西 西安 710072
Author(s):
LI Ying;  PAN Hong-liang;  QIN Fei;  WEI Xiang-geng
Key Laboratory of Combustion, Thermal Structure and Internal Flow Field, Northwestern Polytechnical University, Xi’an 710072, China
关键词:
液体火箭发动机; EASY5; 模块化建模; 仿真
Keywords:
fluoroplastic capsule;  fracture mechanism;  anti-crack performance
分类号:
V434-34
文献标志码:
A
摘要:
为在方案设计和系统性能估算阶段，对液体火箭发动机进行方便快捷的系统研究，基于MSC.EASY5仿真平台，采用模块化建模思想，建立了液体火箭发动机系统工作过程主要组件的仿真模型，通过Fortran/C等自编程序与EASY5链接，进一步扩展了模型元件范围，并扩充了流体种类，使其适用于液体火箭发动机的研究，并根据发动机循环方式，搭建液体火箭发动机系统模型。为验证模型的正确性，针对RD-170发动机系统建立系统模型，并进行稳态点仿真计算，仿真结果与已有资料相符合，且仿真快速便捷，仿真结果精度高。以上结果表明，本文建模与仿真方法具有较强的实用性。
Abstract:
Based on the MSC.EASY5 platform, the simulation models of main components in the operation process of liquid rocket engine were developed to improve the analysis ability in the steps of project design and system performance estimation. By linking the Fortran or C code with EASY5, the component models and fluid types were extended further to make them applied to the study of liquid rocket engine. The system model of the liquid rocket engine were established according to the circulation way of the engine. The system model of RD-170 engine was built and simulating calculation of steady-state points was conducted to validate the correctness of the models. The simulation result coincides with the available materials. The simulation accuracy is high. The results show that the modeling and design and performance estimation of liquid rocket engine with continuous efforts of improving the models.

参考文献/References:

[1]张贵田. 高压补燃液氧煤油发动机[M]. 北京: 国防工业出版社, 2005.
[2]BINDER M. An RL10A-3-3A rocket engine model using the rocket engine transient simulateor (ROCETS) software, AIAA 1993-2357 [R]. USA: AIAA, 1993.
[3]BRADFORD J E, CHARANIA A, GERMAIN B S. REDTOP-2: rocket engine design tool featuring engine performance, weight, cost, and reliability, AIAA 2004-3514[R]. USA: AIAA, 2004.
[4]陈杰. 航天运载器液体火箭推进剂发动机构型分析[D]. 长沙: 国防科技大学研究生院, 1991.

[5]刘昆, 张育林, 程谋森. 液体火箭发动机系统瞬态变化过程模块化建模与仿真[J]. 推进技术, 2003, 24(5): 401- 405.

[6]李家文, 张黎辉, 张振鹏. 液体火箭发动机数值模拟的计算模型建立方法[J]. 推进技术, 2002, 23(5): 363-365.
[7]刘红军. 补燃循环发动机静态特性与动态响应特性研究[D]. 西安: 航天工业总公司第十一研究所, 1998.
[8]魏鹏飞, 吴建军, 刘洪刚, 等. 液体火箭发动机一种通用模块化仿真方法[J]. 推进技术, 2005, 26(2): 147-150.
[9]潘辉, 张黎辉. AMESim软件在液体火箭发动机系统动态仿真上的应用[J]. 火箭推进, 2011, 37(3): 6-11.
[10]VERES J P. Centriful and axial pump design and off-design performance prediction, NASA 106745[R]. USA: NASA, 2010.
[11]邢继发. 世界导弹与航天发动机大全[M]. 北京: 军事科学出版社, 1999.
[12]MANSKI D, GOERTZ C. Cycles for earth-to-orbit pro- pulsion[J]. Journal of Propulsion and Power, 1998, 14(5): 588-604.

相似文献/References:

[1]郑 伟,李护林,陈新红.激光快速成形技术在液体动力领域的应用前景[J].火箭推进,2015,41(06):1.
　ZHENG Wei,LI Hulin,CHEN Xinhong.Application prospect of laser rapid prototyping technology in the field of liquid power[J].Journal of Rocket Propulsion,2015,41(01):1.
[2]郭 敬,宋晶晶,孔凡超.发动机推进剂增压输送系统建模仿真技术综述[J].火箭推进,2015,41(05):1.
　GUO Jing,SONG Jingjing,KONG Fanchao.Overview of modeling and simulation technology for propellant pressurization feed system of liquid rocket engine[J].Journal of Rocket Propulsion,2015,41(01):1.
[3]于 康,谢荣华,陈晓江.表面张力贮箱电子束焊接工艺研究[J].火箭推进,2015,41(05):89.
　YU Kang,XIE Ronghua,CHEN Xiaojiang.Study on electron beam welding process for surface tension tank[J].Journal of Rocket Propulsion,2015,41(01):89.
[4]刘中华,苏 晨,汪军安,等.气路膜片设计研究[J].火箭推进,2015,41(05):95.
　LIU Zhonghua,SU Chen,WANG Junan,et al.Design and study of pneumatic diaphragm in gas circuit[J].Journal of Rocket Propulsion,2015,41(01):95.
[5]薛 薇,蔡震宇,曹红娟,等.基于可视化平台的液氢/液氧火箭发动机核心部件质量计算[J].火箭推进,2015,41(04):61.
　XUE wei,CAI Zhenyu,CAO Hongjuan,et al.Mass calculation of key assembly units in LH2/ LOX rocket engine based on visual interface[J].Journal of Rocket Propulsion,2015,41(01):61.
[6]穆朋刚,童 飞,蒲光荣,等.温度对贮箱增压系统的影响分析[J].火箭推进,2015,41(04):74.
　MU Penggang,TONG Fei,PU Guangrong,et al.Influence of temperature on tank pressurization system[J].Journal of Rocket Propulsion,2015,41(01):74.
[7]高朝辉,刘 宇,肖 肖,等.垂直着陆重复使用运载火箭对动力技术的挑战[J].火箭推进,2015,41(03):1.
　GAO Zhao-hui,LIU Yu,et al.Challenge to propulsion technology for vertical landing reusable launch vehicle[J].Journal of Rocket Propulsion,2015,41(01):1.
[8]申智帅,等.气动增压器技术及其在空间推进系统的应用[J].火箭推进,2015,41(03):15.
　SHEN Zhi-shuai,RUAN Hai-jun,et al.Pneumopump technology and its application in space propulsion system[J].Journal of Rocket Propulsion,2015,41(01):15.
[9]张 翔,徐洪平,安雪岩,等.液体火箭发动机稳态运行故障 数据聚类分析研究0[J].火箭推进,2015,41(02):118.
　ZHANG Xiang,XU Hong-ping,AN Xue-yan,et al.Clustering analysis for fault data in steady process of liquid propellant rocket engine[J].Journal of Rocket Propulsion,2015,41(01):118.
[10]窦 唯,闫宇龙,金志磊,等.某发动机涡轮泵转子高温超速/疲劳试验研究[J].火箭推进,2015,41(01):15.
　DOU Wei,YAN Yu-long,JIN Zhi-lei,et al.Fatigue experiment of turbo-pump rotor at over-speed and high temperature condition[J].Journal of Rocket Propulsion,2015,41(01):15.

备注/Memo

收稿日期：2014-09-13；修回日期：2014-10-29 作者简介：李莹（1989—），女，硕士，研究领域为液体火箭发动机系统

更新日期/Last Update: 1900-01-01