航天推进技术研究院主办
[1]李 彤,刘站国,窦 昱,等.涡轮泵水力试验系统扭矩现场校准技术研究[J].火箭推进,2015,41(03):73-79.
LI Tong,LIU Zhan-guo,DOU Yu,et al.Field calibration technology for torque of turbo pump hydraulic test system[J].Journal of Rocket Propulsion,2015,41(03):73-79.
点击复制
LI Tong,LIU Zhan-guo,DOU Yu,et al.Field calibration technology for torque of turbo pump hydraulic test system[J].Journal of Rocket Propulsion,2015,41(03):73-79.
涡轮泵水力试验系统扭矩现场校准技术研究
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
41
期数:
2015年03期
页码:
73-79
栏目:
测控与试验
出版日期:
2015-06-30
- Title:
- Field calibration technology for torque of turbo pump hydraulic test system
- Keywords:
- turbo pump; torque calibration; moment of couple; field calibration
- 分类号:
- V434.3-34
- 文献标志码:
- A
- 摘要:
- 为有效解决液体火箭发动机涡轮泵水力试验系统扭矩现场校准的难题，提出了一种基于力偶矩加载原理的扭矩现场校准技术。简要地介绍了该套装置的结构组成和技术难点，并对不确定度进行了分析。
- Abstract:
- A field torque calibration technology based on the principle of moment of couple loading is presented in this paper to effectively solve the problem of field torque calibration of the hydraulic experimental system for turbo pump designed for the liquid rocket engine. The configuration and technical challenges of the system are introduced briefly. The uncertainty is analyzed.
参考文献/References:
[1] 商维绿. 现代扭矩测量技术[M]. 上海: 上海交通大学出版社, 1999.
[2] 陈曦. 现场扭矩测试技术和方法[J]. 船舶工程, 2012, 34（增刊）: 22-24.
[3] 李友先. 扭矩校准技术现状与发展趋势[J]. 计量与测试技术, 2013, 40(11): 36-38.
[4] SUE P, WILSON D. High precision torque measurement on a rotating load coupling for power generation opera- tions, IEEE 978-1-4577-1772-7/12[R]. USA: IEEE, 2012.
[5] 张有颐. 转矩测量技术[M]. 北京: 中国计量出版社, 1986.
[6] 王海林, 杨兰. 扭矩现场校准测试技术分析[J]. 工业计量, 2013 (增刊): 7-10.
相似文献/References:
[1]张晨曦,马晓丹.火箭发动机涡轮泵集成设计系统[J].火箭推进,2015,41(04):79.
ZHANG Chenxi,MA Xiaodan.Integration design system for turbo pump
in rocket engine[J].Journal of Rocket Propulsion,2015,41(03):79.
[2]窦 唯,刘占生.液体火箭发动机涡轮泵转子弯扭耦合振动研究[J].火箭推进,2012,38(04):17.
DOU Wei,LIU Zhan-sheng.Research on bend-twist coupling vibration of liquid rocket engine turbopump rotors[J].Journal of Rocket Propulsion,2012,38(03):17.
[3]唐 飞,李家文.诱导轮平面叶栅汽蚀不稳定现象的数值分析[J].火箭推进,2011,37(01):34.
TANG Fei,LI Jia-wen.Numerical analysis of instable cavitation phenomenon in 2D blade cascade of inducer[J].Journal of Rocket Propulsion,2011,37(03):34.
[4]白东安,段增斌,张翠儒.涡轮泵端面密封性能与漏气量影响研究[J].火箭推进,2010,36(01):38.
Bai Dong'an,Duan Zenbin,Zhang Cuiru.Effects of leaking rate on turbopump end-face sealing performance[J].Journal of Rocket Propulsion,2010,36(03):38.
[5]邓长华,周云端.涡轮泵环形颗粒阻尼器设计[J].火箭推进,2009,35(05):29.
Deng Changhua,Zhou Yunduan.Design of circular particle damper for turbopump[J].Journal of Rocket Propulsion,2009,35(03):29.
[6]白东安.涡轮泵超低工况性能研究[J].火箭推进,2008,34(03):13.
Bai Dong'an.Research on the turbo-pump performance under
ultra--low operation condition[J].Journal of Rocket Propulsion,2008,34(03):13.
[7]凌桂龙,张黎辉,唐家鹏,等.泵压式氢/氧液体火箭发动机质量分析[J].火箭推进,2007,33(01):1.
Ling Guilong Zhang Lihui Tang Jiapeng.Mass analysis of pump-pressurized hydrogen/oxygen liquid propellant rocket engine[J].Journal of Rocket Propulsion,2007,33(03):1.
[8]黄智勇,李昌奂,黄红,等.高工况涡轮泵轴系状态对工作可靠性的影响[J].火箭推进,2007,33(01):32.
Huang Zhiyong,Li Changhuan,Huang Hong.The effect of high operating condition turbopump shafting status on reliability[J].Journal of Rocket Propulsion,2007,33(03):32.
[9]徐悦,田爱梅.基于CFD的涡轮泵转子密封流体激振研究进展[J].火箭推进,2005,31(01):8.
Xu Yue,Tian Aimei.Progress of investigation on turbopump annular seal fluid-induced vibration based on CFD[J].Journal of Rocket Propulsion,2005,31(03):8.
[10]张忠利.高空滑行期间氧化剂泵壳体冷却方案研究[J].火箭推进,2005,31(01):24.
Zhang Zhongli.Investigation on cooling of oxidizer pump case during coast period[J].Journal of Rocket Propulsion,2005,31(03):24.
备注/Memo
收稿日期：2015-03-02；修回日期：2015-04-29 基金项目：中国航天科技集团公司支撑项目（2011JY021） 作者简介：李彤（1968—），女，高级工程师，研究领域为计量检测技术
更新日期/Last Update:
1900-01-01