航天推进技术研究院主办
[1]张艳桥,张维明.铌铪合金喷管搭接结构激光点焊技术研究[J].火箭推进,2018,44(02):71-75.
ZHANG Yanqiao,ZHANG Weiming.Technical research on laser spot welding of overlap joint of niobium hafnium alloy nozzle[J].Journal of Rocket Propulsion,2018,44(02):71-75.
点击复制
ZHANG Yanqiao,ZHANG Weiming.Technical research on laser spot welding of overlap joint of niobium hafnium alloy nozzle[J].Journal of Rocket Propulsion,2018,44(02):71-75.
铌铪合金喷管搭接结构激光点焊技术研究
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
44
期数:
2018年02期
页码:
71-75
栏目:
专论与综述
出版日期:
2018-04-30
- Title:
- Technical research on laser spot welding of overlap joint of niobium hafnium alloy nozzle
- 文章编号:
- 1672-9374(2018)02-0071-05
- 分类号:
- V261.8-34
- 文献标志码:
- A
- 摘要:
- 某型号铌铪合金喷管加强筋原采用电阻点焊,但存在接头强度低、劳动强度大和焊接效率低等问题。为实现铌铪合金喷管加强筋高质量高效连接,开展了激光点焊工艺试验研究。基于铌铪合金试板激光点焊试验,重点研究了焊点结构设计、焊接工艺参数设计、焊点熔合特征、接头力学性能和接头断裂行为。研究结果表明:7 mm的环形焊点是较为理想的焊点结构,熔合面宽度是决定接头性能和断裂模式的关键因素,而焊接工艺参数直接影响接头熔合面宽度。选择合理的焊接工艺参数,控制焊点熔合面宽度大于0.7 mm,接头断裂模式为母材撕裂或热影响区撕裂,该种断裂模式接头强度较高,接头承载能力不小于8 000 N。最后采用激光点焊工艺实现了铌铪合金喷管高强度的连接,并通过了试车考核。
- Abstract:
- The strengthening ribs for a type of niobium hafnium alloy nozzle was welded by resistance welding in the past, but there were many problems in welding effect, such as low strength, low efficiency and high labour intensity. A study on laser spot welding of strengthening ribs for niobium hafnium alloy nozzle was carried out to improve welding quality. The influence of welding parameters on the mechanical properties, welding spot fusion characteristics and fracture behavior of the joints was studied. The results show that 0.7 mm diameter ring welding joint is the ideal spot welding structure, the fusion width is the key factor to determine the strength and fracture mode of the joint, and the welding parameters directly affects the fusion width. Therefore, When greater than 0.7 mm fusion width is realized by choosing the rational welding parameter, a higher strength welding joint and the not less than 8 000 N strength of the joint can be achieved. The laser spot welding has been successfully applied to production of niobium hafnium alloy nozzle.
参考文献/References:
[1] 张博. 低碳钢激光点焊工艺特性与力学性能研究[D]. 哈尔滨:哈尔滨工业大学工学. 2007.
[2] 陈彦宾.现代激光焊接技术[M]北京:科学出版社出版,2005.
[3] 邹增大, 杜则裕, 田志凌, 等. 焊接手册(第三版)[M]. 北京:机械工业出版社, 2008.
[4] 刘泽敏, 王磊, 谢屹. 自锁阀激光焊接工艺研究[J]. 火箭推进, 2016,42(4):90-96.
LIU Zemin, WANG Lei, XIE Yi. Study on laser welding technology for latching valve [J]. Journal of rocket propulsion, 2016, 42(4): 90-96.
[5] 陶汪, 马轶男, 陈彦宾,等. LF6铝合金激光填丝点焊工艺研究[J]. 中国激光, 2013, 40,(11):112-119.
[6] 赵守辉. 铝合金激光点焊工艺优化[D]. 哈尔滨:哈尔滨工业大学工学. 2006.
[7] 吕涛. 钛合金舱体结构件激光点焊变形预测与焊接顺序优化[D]. 哈尔滨:哈尔滨工业大学工学. 2013.
[8] TORKAMANY M J, SABBAGHZADEH J, HAMEDI M J. Effect of laser welding mode on the microstructure and mechanical performance of dissimilar laser spot welds between low carbon and austenitic stainless steels [J]. Materials and design, 2012, 34: 666-672.
[9] 潘兆义,蔡刚,宋国新.铌铪合金推力室身部表面高温防护涂层的工艺技术研究[J]. 火箭推进, 2016,42(4):68-73.
PAN Zhaoyi, CAI Gang, SONG Guoxin. Research on thermal protection coating on body surface of Nb-Hf alloy thrust chamber [J]. Journal of rocket propulsion, 2016, 42(4): 68-73.
[10] 陶汪. 激光点焊焊点质量监测与控制研究[D]. 哈尔滨:哈尔滨工业大学. 2008.
相似文献/References:
[1]潘兆义,蔡刚,宋国新.铌铪合金推力室身部表面高温防护涂层的工艺技术研究[J].火箭推进,2016,42(04):68.
PAN Zhaoyi,CAI Gang,SONG Guoxin.Research on thermal protection coatings on body surface of Nb-Hf alloy thrust chamber[J].Journal of Rocket Propulsion,2016,42(02):68.
[2]王 堃,王国强.双组元推力室热防护涂层工艺技术研究[J].火箭推进,2018,44(02):76.
WANG Kun,WANG Guoqiang.Research on thermal protection coating technique of bipropellant thrust chamber[J].Journal of Rocket Propulsion,2018,44(02):76.
[3]潘兆义,赵青芮,王国强,等.铌铪合金表面硅化物涂层的高温失效行为分析[J].火箭推进,2019,45(02):66.
PAN Zhaoyi,ZHAO Qingrui,WANG Guoqiang,et al.Failure behavior analysis of silicide coating on
Nb-Hf alloy at surface high temperature[J].Journal of Rocket Propulsion,2019,45(02):66.
备注/Memo
收稿日期:2017-06-07
作者简介: 张艳桥(1989—),男,工程师,研究领域为高能束焊接技术
更新日期/Last Update:
1900-01-01