PDF下载 分享
[1]白世雄,刘强.离心泵加注系统工作可靠性研究[J].火箭推进,2018,44(05):81-86.
　BAI Shixiong,LIU Qiang.Study on reliability of centrifugal pump filling system[J].Journal of Rocket Propulsion,2018,44(05):81-86.
点击复制

离心泵加注系统工作可靠性研究

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 44 期数: 2018年05期 页码: 81-86 栏目: 测控与试验 出版日期: 2018-10-31
Title:
Study on reliability of centrifugal pump filling system
文章编号:
1672-9374(2018)05-0081-06
作者:
白世雄; 刘强
西安航天动力试验技术研究所,陕西 西安710100
Author(s):
BAI Shixiong; LIU Qiang
Xi'an Aerospace Propulsion Test Technology Institute,Xi'an 710100,China
关键词:
离心泵;  扬程;  流量;  流体阻力
Keywords:
centrifugal pump;  lift;  flow rate;  fluid resistance
分类号:
V434+.3-34
文献标志码:
A
摘要:
介绍了离心泵泵压加注系统组成和工作原理,通过计算离心泵和泵压加注系统的扬程,得到扬程与流量关系式,绘制离心泵扬程与流量特性曲线和泵压系统扬程曲线,由两条曲线相交确定离心泵工作点。然后绘制泵压加注系统在管路流阻、容器液位动态变化情况下离心泵工作点的变化曲线,分别和离心泵扬程与流量特性曲线相交,分析曲线图上不同流阻、液位下的离心泵工作点,得出导致离心泵偏离正常工作点的主要因素。理论分析结果经验证与泵压加注系统实际运行结果基本一致。依据分析结果,制定了针对性的控制措施,达到提高离心泵加注系统的工作可靠性的目的。
Abstract:
This paper briefly introduces working principle and system composition of pumping pressure filling system for the centrifugal pump.By calculating the lift of centrifugal pump and pumping pressure filling system, the relationship between fiow and lift is obtained.The characteristic curves of lift and flow of centrifugal pump as well as the lift curve of pumping pressure filling system are drawn, in which the working point of centrifugal pump is determined by the intersection of both curves.Then, the variation curve of the operating point of centrifugal pump is drawn under the dynamic change of fluid resistance in pipeline and the liquid level in container, which intersects with the lift and flow characteristic curves of the centrifugal pump respectively.By analyzing the working point of centrifugal pump at different fluid resistances and liquid levels, major factors that cause the centrifugal pump to deviate from the normal working point are obtained.It is verfied that the theoretical analysis results are basically consistent with the actual operating results of the pumping pressure filling system.According to the analysis results, the specific control measures are formulated to improve the reliability of filling system for centrifugal pump.

参考文献/References:

[1] 朱有庭,曲文海,于浦义.化工设备设计手册[M].北京:化学工业出版社,2004.
[2] 陈乃祥.离心泵[M].北京:机械工业出版社,2006.
[3] WARREN L, JULIAN C, PETER H.Unit operations of chemical engineering[M].New York:Mcgraw-Hill,2001.
[4] 李云,姜培正.过程流体机械[M].北京:化学工业出版社,2008.
[5] 陈敏恒,丛德滋,方图南,等.化工原理[M].北京:化学工业出版社,2008.
[6] 陈东,谢继红.热泵技术及其应用[M].北京:化学工业出版社,2006.
[7] 张翠儒,白安东,郭唯.液体火箭上面级发动机用超低比转数泵研究[J].火箭推进,2005,31(2):17-22.
ZHANG Cuiru,BAI Dongan,GUO Wei.Research on ultra low specific speed rotation pump for upper stage engine[J].Journal of rocket propulsion, 2005,31(2):17-22.
[8] 邹华生,钟理,伍钦.流体力学与传热[M].广州:华南理工大学出版社,2004.
[9] 宋少娟.化工企业常见危险源与安全应对措施探讨[J].中国石油石化,2016(2):50-90.
[10] 崔克清.化工单元运行安全技术[M].北京:化学工业出版社,2006.
[11] 王运东.传递过程原理[M].北京:清华大学出版社,2002.

相似文献/References:

[1]严俊峰,陈 晖,逯婉若.泵-管路系统的汽蚀自激振荡特性分析[J].火箭推进,2015,41(05):29.
　YAN Junfeng,CHEN Hui,LU Wanruo.Analysis on characteristics of self-excited cavitation oscillation in pump-piping system[J].Journal of Rocket Propulsion,2015,41(05):29.
[2]于海力,张 锐,刘海丽,等.高压高扬程固液两相介质离心泵的设计原则[J].火箭推进,2015,41(02):70.
　YU Hai-li,ZHANG Rui,LIU Hai-li,et al.Design philosophy of high-pressure & high-lift centrifugal pump for solid-liquid phase mediums[J].Journal of Rocket Propulsion,2015,41(05):70.
[3]郭 维,白东安.液体火箭发动机用超低比转速离心泵优化设计[J].火箭推进,2011,37(05):19.
　GUO Wei,BAI Dong-an.Optimal design of ultra-low specific speed centrifugal pump for LRE[J].Journal of Rocket Propulsion,2011,37(05):19.
[4]郭维,白东安.超低比转速离心泵内流场计算及分析[J].火箭推进,2007,33(02):26.
　Guo Wei,Bai Dongan.Inner flow field computation and analysis of super low-specific-speed centrifugal pump[J].Journal of Rocket Propulsion,2007,33(05):26.
[5]严俊峰,陈炜,蒲光荣,等.叶轮盖板侧的流动对离心泵泄漏量的影响[J].火箭推进,2007,33(03):20.
　Yan Junfeng,Chen Wei,Pu Guangrong.The effect of flow in the impeller shroud on the leakage rate in a centrifugal pump[J].Journal of Rocket Propulsion,2007,33(05):20.
[6]郑赟韬,蔡国飙,尹贵增,等.液体火箭发动机离心泵叶轮的多目标优化设计[J].火箭推进,2006,32(01):14.
　Zheng Yuntao,Cai Guobiao,Yin Guizeng.Multi-objective optimization and design for centrifugal impeller of rocket engine pumps[J].Journal of Rocket Propulsion,2006,32(05):14.
[7]严俊峰,陈炜.基于遗传算法的低比转速高速泵优化设计[J].火箭推进,2006,32(03):1.
　Yan Junfeng,Chen Wei.Optimum design of low-specific-speed high-speed centrifugal pump based on genetic algorithm[J].Journal of Rocket Propulsion,2006,32(05):1.
[8]张翠儒,白东安,郭维,等.液体火箭上面级发动机用超低比转数泵研究[J].火箭推进,2005,31(02):17.
　Zhang Cuiru,Bai dongan,Guo Wei.Research on ultra-low-specific-speed rotation pump for upper stage engine[J].Journal of Rocket Propulsion,2005,31(05):17.
[9]赵瑞勇,张翠儒,刘军年,等.面积比对变工况泵性能稳定性影响的研究[J].火箭推进,2016,42(04):35.
　ZHAO Ruiyong,ZHANG Cuiru,LIU Junnian,et al.Investigation on influence of different area ratio on stability of centrifugal pump with variable working conditions[J].Journal of Rocket Propulsion,2016,42(05):35.
[10]严俊峰,陈晖,王文廷.基于比例因子的离心泵圆弧叶片造型研究[J].火箭推进,2016,42(03):45.
　YAN Junfeng,CHEN Hui,WANG Wenting.Research on shape construction of circular blade in centrifugal pump based on scale factor method[J].Journal of Rocket Propulsion,2016,42(05):45.

备注/Memo

收稿日期:2017-09-05
作者简介: 白世雄(1987—),男,工程师,研究领域为液体火箭发动机试验安全技术

更新日期/Last Update: 1900-01-01