航天推进技术研究院主办
[1]吴晓明,周亚雄,杨欢庆,等.选择性激光烧结翘曲变形抑制工艺[J].火箭推进,2019,45(03):75-80.
WU Xiaoming,ZHOU Yaxiong,YANG Huanqing,et al.Process study on warp distortion inhibition of selective laser sintering[J].Journal of Rocket Propulsion,2019,45(03):75-80.
点击复制
WU Xiaoming,ZHOU Yaxiong,YANG Huanqing,et al.Process study on warp distortion inhibition of selective laser sintering[J].Journal of Rocket Propulsion,2019,45(03):75-80.
选择性激光烧结翘曲变形抑制工艺
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
45
期数:
2019年03期
页码:
75-80
栏目:
工艺与材料
出版日期:
2019-06-30
- Title:
- Process study on warp distortion inhibition of selective laser sintering
- 文章编号:
- 1672-9374(2019)03-0075-06
- 分类号:
- V261.3
- 文献标志码:
- A
- 摘要:
- 针对选择性激光烧结(selective laser sintering,SLS)翘曲变形问题,阐述了翘曲变形产生机理,得出主要原因为温度场分布不均匀和烧结层强度不足,确定了预热温度控制和添加工艺支撑两种翘曲变形抑制措施。以悬臂试样为研究对象,设计正交实验,建立了悬臂结构的预热温度与翘曲变形率的二次多元回归模型,确定了合理预热温度工艺参数,结合产品结构特点,基于Magics软件开展了某型液体火箭发动机叶轮工艺支撑设计。结果表明:悬臂试样翘曲变形由6.13%降低至0.5%,产品翘曲变形率由10.31%降低至1.80%,较改进前降低了82.5%,解决了烧结翘曲变形问题。
- Abstract:
- Aiming at the warp distortion problem of selective laser sintering(SLS), its produce mechanism is descried. Main reasons are the nonuniform distribution of temperature field and the insufficient strength of sintered layer. Preheating temperature controlling and adding technologic support are the key measures to inhibit warp distortion. Taking the cantilever sample as the research object, the orthogonal experiment on the preheating temperature was designed, and a quadratic multiple regression model of the preheating temperature and warp distortion rate was established for the cantilever structure.. Furthermore, the reasonable technical parameters of preheating temperature were determined, and the impeller technical support design of a liquid-fuel rocket engine was carried out by using Magics software combined with the product structure characteristics. The results show that the wrap distortion rate of cantilever sample is reduced from 6.13% to 0.5%, and the wrap distortion rate of product is reduced from 10.31% to 1.80%, which has solved the problem of SLS warp distortion inhibition.
参考文献/References:
[1] 樊振中, 徐秀利, 王玉灵, 等.熔模精密铸造技术在航空工业的应用及发展[J].特种铸造及有色合金,2014,34(3):285-289.
[2] 杨永平.煤油泵低压壳体真空熔模精密铸造工艺[J].火箭推进,2004,30(2):37-40.
YANG Y P.The study of precision casting for low pressure of kerosene pump[J].Journal of Rocket Propulsion,2004,30(2):37-40.
[3] 高怀胜.S-08钢真空熔模精密铸造工艺研究[J].火箭推进,2004,30(5):46-49.
GAO H S.Process of S-08 steel precision cast by molten mould in vacuum[J].Journal of Rocket Propulsion,2004,30(5):46-49.
[4] 赵志国, 柏林, 李黎, 等.激光选区熔化成形技术的发展现状及研究进展[J].航空制造技术,2014(19):46-49.
[5] 邵娟, 霍文国.浅析金属粉末选择性激光烧结快速成型技术[J].铝加工,2007(2):21-23.
[6] 闫旭日, 颜永年, 张人佶, 等.分层实体制造中层间应力和翘曲变形的研究[J].机械工程学报,2003,39(5):36-40.
[7] 李湘生, 韩明, 史玉升, 等.SLS成形件的收缩模型和翘曲模型[J].中国机械工程,2001, 12(8):887-889.
[8] SENTHILKUMARAN K, PANDEY P M, RAO P V M.Influence of building strategies on the accuracy of parts in selective laser sintering[J].Materials & Design,2009,30(8):2946-2954.
[9] 胥橙庭, 沈以赴, 顾冬冬, 等.选择性激光烧结成形温度场的研究进展[J].铸造,2004,53(7):511-515.
[10] 傅蔡安, 陈佩胡.选择性激光烧结的翘曲变形与扫描方式的研究[J].铸造,2008,57(12):1237-1240.
[11] 冯涛, 孙建民, 宗贵升.用选择性激光烧结实现快速精密铸造[J].中国机械工程, 1997,8(5):21-22.
[12] 李守卫, 沈以赴, 顾冬冬, 等.选择性激光烧结金属件翘曲与开裂问题的研究进展[J].激光杂志,2005,26(5):4-6.
[13] 吴传保, 刘承美, 史玉升, 等.高分子材料选区激光烧结翘曲的研究[J].华中科技大学学报(自然科学版),2002,30(8):107-109.
[14] 李守卫, 沈以赴, 顾冬冬, 等.选择性激光烧结金属件翘曲与开裂问题的研究进展[J].激光杂志,2005,26(5):4-6.
[15] 张忠明.基于选区激光熔化的悬臂结构成形工艺研究[D].重庆:重庆大学,2016.
备注/Memo
收稿日期:2018-01-23
作者简介:吴晓明(1991—),男,硕士,工程师,研究领域为熔模精密铸造
更新日期/Last Update:
2019-06-30