航天推进技术研究院主办
[1]毛 凯,李昌奂,张 聃,等.基于导叶端弯的小展弦比燃气涡轮优化设计[J].火箭推进,2019,45(06):23-28.
MAO Kai,LI Changhuan,ZHANG Dan,et al.Optimization design of a low aspect ration gas turbine for curved guide vane[J].Journal of Rocket Propulsion,2019,45(06):23-28.
点击复制
MAO Kai,LI Changhuan,ZHANG Dan,et al.Optimization design of a low aspect ration gas turbine for curved guide vane[J].Journal of Rocket Propulsion,2019,45(06):23-28.
基于导叶端弯的小展弦比燃气涡轮优化设计
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
45
期数:
2019年06期
页码:
23-28
栏目:
研究与技术
出版日期:
2019-12-25
- Title:
- Optimization design of a low aspect ration gas turbine for curved guide vane
- 文章编号:
- 1672-9374(2019)06-0023-06
- Keywords:
- low aspect ration; curved guide vane; numerical simulate; optimization
- 分类号:
- V434.21
- 文献标志码:
- A
- 摘要:
- 以某型火箭发动机用亚声速小展弦比燃气涡轮为研究对象,为进一步改善涡轮内部流场,提高了涡轮效率,通过调整导叶子午端壁型线曲率、采用导叶端弯的设计方法对涡轮进行了优化设计,其作用在于减小叶片通道二次流损失,并将导叶出口压力分布进行调整,从而减小叶顶泄漏损失。基于六面体网格,采用CFX流场分析软件对优化前后结构进行了数值计算,结果表明:优化后单通道无叶顶间隙模型涡轮效率提高1.4%; 采用正弯设计后,轮毂和叶顶处绝对和相对气流角显著增大,叶片中部气流角有所减小,整体分布更加均匀,消除了原型结构动叶轮毂区的流动分离; 优化后全通道模型围带间隙前后压差明显降低,泄漏量从7%降低至4.75%,涡轮效率提高5.9%。
- Abstract:
- In order to further improve the internal flow field and improve the turbine efficiency, a sub-sonic low aspect gas turbine for a certain rocket engine was taken as research object, the optimization was developed in this paper through the adjustment of meridional endwall’s curvature and the design of curved guide vanes.Its function is to reduce the secondary flow loss and optimize the guide outlet pressure distribution at guide vanes outlet, thereby reducing the leak loss at blade top.Base on the hexahedron grid, CFX flow field analysis software was used to calculate the turbine performance.The result shows that the optimized turbine efficiency of single channel gap-less structure increases by 1.4%; the absolute and relative airflow angles at hub and tip of the blade are significantly increased after the curved blade was used, the airflow angle in the middle of the blade is reduced, and the overall distribution is more uniform, the flow separation of the prototype structure is eliminated; the relative leakage of blade tip with maze structure gap decreases by 7% to 4.75%,turbine overall efficiency increases by 5.9%.
参考文献/References:
[1] 王仲奇, 韩万今, 徐文远, 等.在低展弦比透平静叶栅中叶片的弯曲作用[J].工程热物理学报, 1990, 11(3):255-262.
[2] TAN C Q, ZHANG H L, XIA H D, et al.Blade bowing effect on aerodynamic performance of a highly loaded turbine cascade[J].Journal of Propulsion and Power, 2010, 26(3): 604-608.
[3] HAN W J, WANG Z Q, TAN C Q, et al. Effects of leaning and curving of blades with high turning angles on the aerodynamic characteristics of turbine rectangular Cascades[J].Journal of Turbomachinery, 1994, 116(3): 417-424.
[4] 张晓辉, 陈绍文, 李燕飞.基于弯曲叶片的燃气涡轮导叶数值研究[J].推进技术, 2016, 37(3):443-448.
[5] 谢婕, 夏晨, 张远森, 等.低展弦比微型轴流涡轮弯叶片设计[J].南京航空航天大学学报, 2015, 47(1):160-166.
[6] 李斌, 王晓锋, 陈本森, 等.大叶顶间隙高效率火箭发动机涡轮设计[J].宇航学报, 2009, 30(2):695-698.
[7] 郑晓宇, 林奇燕, 王磊.小型部分进气亚声速涡轮流动损失研究及优化[J].火箭推进, 2017, 43(1):32-37.ZHENG X Y, LIN Q Y, WANG L.Research and optimization for flow loss of a small partial admission subsonic turbine[J].Journal of Rocket Propulsion, 2017, 43(1):32-37.
[8] 严俊峰, 逯婉若.冲击式涡轮内部流动数值研究[J].火箭推进, 2009, 35(1):31-35.YAN J F, LU W R.Numerical analysis of inner flow field for an impulse turbine[J].Journal of Rocket Propulsion, 2009, 35(1):31-35.
[9] 高杰, 郑群, 李义进.动叶顶部蜂窝面迷宫密封对涡轮级气动性能的影响[J].航空动力学报, 2012, 27(1):160-168.
[10] 贾惟, 刘火星.涡轮叶栅叶冠泄漏流动数值研究[J].推进技术, 2013, 34(3):316-325.
[11] 付云峰, 宋彦萍, 陈聪, 等. 叶顶布置蜂窝的涡轮平面叶栅间隙泄漏流动研究[J].工程热物理学报, 2017, 38(1): 68-73.
[12] 王晓锋, 李昌奂, 韩飞, 等. 动叶顶部间隙结构对涡轮性能影响的数值分析[J].火箭推进, 2013, 39(2): 24-28.WANG X F, LI C H, HAN F, et al. Numerical analysis on influence of rotor tip clearance structure on turbine performance[J].Journal of Rocket Propulsion, 2013, 39(2): 24-28.
[13] 胡骏, 吴铁鹰, 曹人靖.航空叶片机原理[M].北京:国防工业出版社, 2006.
[14] 石靖,周勇,李维.低展弦比高温涡轮导叶外端壁收缩与倾斜叶片组合设计[J].南华动力,1999(2):1-6
备注/Memo
收稿日期:2017-11-29; 修回日期:2018-01-35基金项目:国家重大基础研究项目(613321)作者简介:毛 凯(1987—),男,硕士,工程师,研究领域为液体火箭发动机涡轮泵设计
更新日期/Last Update:
2019-12-20