航天推进技术研究院主办
WANG Taiping,SUN Bing,XUE Lipeng,et al.Numerical simulation of non-uniform circular-hole film cooling at the near-injection region of hydrogen/oxygen rocket engine[J].Journal of Rocket Propulsion,2022,48(04):1-12.
氢氧发动机非均匀圆孔头部气膜冷却数值模拟
- Title:
- Numerical simulation of non-uniform circular-hole film cooling at the near-injection region of hydrogen/oxygen rocket engine
- 文章编号:
- 1672-9374(2022)04-0001-12
- 分类号:
- V434
- 文献标志码:
- A
- 摘要:
- 氢氧火箭发动机燃烧室壁面热环境十分恶劣,头部气膜冷却是主要辅助冷却手段之一,圆孔头部气膜冷却是重要的设计方案。对圆孔型头部气膜进行了三维数值仿真研究,考虑推力室外部再生冷却的影响,通过全面数值实验分析了气膜流量占比、气膜孔直径和相邻气膜孔面积比等参数的影响,提出一种非均匀分布的圆孔头部气膜冷却方案。结果表明,在氢氧火箭发动机圆孔头部气膜冷却中,存在一个最佳吹风比使得头部区域冷却效果最好,最佳吹风比的值由气膜流量占比和气膜孔直径共同决定,最佳吹风比介于5.454~5.849之间 通过合理的非均匀圆孔气膜结构设计,控制相邻气膜孔面积比在0.6~0.8范围内,采用提出的非均匀气膜孔方案有利于提高燃烧室的整体性能。
- Abstract:
- The thermal environment of the combustion chamber wall in hydrogen/oxygen rocket engine is very harsh, and the circular-hole film cooling is one of the main auxiliary methods to reduce the heat load in the near-injection region.In this study,the three-dimensional numerical simulation of the head gas film with cylindrical film hole was carried out, considering the influence of regenerative cooling outside the thrust chamber.Through comprehensive numerical experiments, the effects of parameters such as the proportion of gas film flow ratio, the diameter of film hole and the area ratio of adjacent film holes, and a gas film cooling scheme of circular hole head with non-uniform distribution was proposed.The results show that there is an optimal blowing ratio to make the cooling effect of the head area the best in the film cooling of the head of the hydrogen/oxygen rocket engine.The optimal blowing ratio is determined by the ratio of the air film flow rate and the diameter of the air film hole, and the optimal air blowing ratio in this study is between 5.454 and 5.849.Through the reasonable structure design of the non-uniform circular-hole, the area ratio of adjacent gas film holes is controlled within the range of 0.6-0.8.The proposed non-uniform film hole scheme is beneficial to the improvement of the overall combustion chamber performance, which can provide a reference for engineering design.
参考文献/References:
[1] 葛绍岩,刘登瀛,徐靖中.气膜冷却[M].北京:科学出版社,1985.
[2] 刘国球.液体火箭发动机原理[M].北京:中国宇航出版社,2009.
[3] 朱森元.氢氧火箭发动机及其低温技术[M].北京:中国宇航出版社,2016.
[4] 白江涛,朱惠人,张宗卫,等.流量比对气膜冷却叶片表面换热系数的影响[J].西安交通大学学报,2011,45(7):95-99.
[5] NA S,ZHU B,BRYDEN M,et al.CFD analysis of film cooling[C]//44th AIAA Aerospace Sciences Meeting and Exhibit.Reston,Virginia:AIAA,2006.
[6] MIAO J M,WU C Y.Conjugate heat transfer analysis of a fan-shaped film cooled concave composite plate[C]//9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference.Reston,Virginia:AIAA,2006.
[7] 雷云涛,林智荣,袁新.不同吹风比下平板气膜冷却数值模拟[J].清华大学学报(自然科学版),2008,48(8):1331-1334.
[8] 雷蒋,鲁瑞山,秦岭,等.静叶栅上游端壁双射流气膜冷却特性实验[J].火箭推进,2020,46(2):36-43.
LEI J, LU R S, QIN L, et al. Experimental study of film-cooling characteristics of DJFC holes located upstream of a vane[J]. Journal of Rocket Propulsion, 2020, 46(2): 36-43.
[9] KACYNSKI K,HOFFMAN J.The prediction of nozzle performance and heat transfer in hydrogen/oxygen rocket engines with transpiration cooling,film cooling,and high area ratios[C]//30th Joint Propulsion Conference and Exhibit.Reston,Virginia:AIAA,1994.
[10] 孙永奇,李宝荣,杨建文.上面级发动机推力室喷管延伸段气膜冷却研究[J].火箭推进,2013,39(4):13-18.
SUN Y Q, LI B R, YANG J W. Research on gas film cooling at nozzle extension section of thrust chamber for upper stage engine[J]. Journal of Rocket Propulsion, 2013, 39(4): 13-18.
[11] WEISS J,MERKLE C.Numerical investigation of reacting flowfields in low-thrust rocket engine combustors[C]//27th Joint Propulsion Conference.Reston,Virginia:AIAA,1991.
[12] BETTI B,MARTELLI E,NASUTI F,et al.Numerical study of heat transfer in film cooled thrust chambers[C]//48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit.Reston,Virginia:AIAA,2012.
[13] 孙学卫,朱克勤,信伟,等.采用气膜冷却的燃烧室流场数值研究[J].清华大学学报(自然科学版),2008,48(8):1347-1350.
[14] 任加万,谭永华.燃烧室缝槽气膜冷却方案研究[J].火箭推进,2007,33(6):28-33.
REN J W,TAN Y H.Investigation on the structure scheme of slot air film cooling combustion chamber[J].Journal of Rocket Propulsion,2007,33(6):28-33.
[15] 高兴峰,张建伟,孙冰,等.推力室头部最优气膜参数研究[J].火箭推进,2018,44(2):10-17.
GAO X F,ZHANG J W,SUN B,et al.Study on optimal gas film parameters of near-injection region in thrust chamber[J].Journal of Rocket Propulsion,2018,44(2):10-17.
[16] SONG J W,SUN B.Coupled numerical simulation of combustion and regenerative cooling in LOX/Methane rocket engines[J].Applied Thermal Engineering,2016,106:762-773.
[17] 王福军.计算流体动力学分析:CFD软件原理与应用[M].北京:清华大学出版社,2004.
[18] LAUNDER B E,SPALDING D B.The numerical computation of turbulent flows[J].Computer Methods in Applied Mechanics and Engineering,1974,3(2):269-289.
[19] SOZER E,VAIDYANATHAN A,SEGAL C,et al.Computational assessment of gaseous reacting flows in single element injector[C]//47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition.Reston,Virginia:AIAA,2009.
[20] MAGNUSSEN B.On the structure of turbulence and a generalized eddy dissipation concept for chemical reaction in turbulent flow[C]//19th Aerospace Sciences Meeting.Reston,Virginia:AIAA,1981.
备注/Memo
收稿日期:2021-01-21 修回日期:2021-02-25
作者简介:王太平(1990—),男,博士,工程师,研究领域为液体火箭发动机热防护、阀门设计。