航天推进技术研究院主办
[1]刘军彦,王玫,田雅洁,等.液体火箭发动机多层嵌套钎焊铣槽式换热器传热模型[J].火箭推进,2022,48(04):51-58.
LIU Junyan,WANG Mei,TIAN Yajie,et al.Heat transfer model of multi-layer brazed milling groove heat exchanger for liquid rocket engine[J].Journal of Rocket Propulsion,2022,48(04):51-58.
点击复制
LIU Junyan,WANG Mei,TIAN Yajie,et al.Heat transfer model of multi-layer brazed milling groove heat exchanger for liquid rocket engine[J].Journal of Rocket Propulsion,2022,48(04):51-58.
液体火箭发动机多层嵌套钎焊铣槽式换热器传热模型
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
48
期数:
2022年04期
页码:
51-58
栏目:
目次
出版日期:
2022-08-21
- Title:
- Heat transfer model of multi-layer brazed milling groove heat exchanger for liquid rocket engine
- 文章编号:
- 1672-9374(2022)04-0051-08
- 关键词:
- 火箭发动机 换热器 传热计算 仿真模型
- 分类号:
- V434.14
- 文献标志码:
- A
- 摘要:
- 为满足某大型液体火箭贮箱增压介质加热需求,对火箭上常用的多层嵌套钎焊铣槽式换热器结构特点进行了分析,对影响传热计算准确性的主要因素进行了剖析,建立了一维数学仿真传热模型,针对局部两相流换热采用了简化计算模型。换热器试验结果表明:传热计算结果与试验结果一致性较好,表明了传热模型建立的合理性 基于试验数据,对两相流简化计算模型进行了修正,拓宽了传热模型的适用性和计算的准确性。修正后的传热模型可用于多层嵌套钎焊铣槽式换热器或类似结构换热器的初步优化设计。
- Abstract:
- In order to meet the heating requirements of pressurized medium in the tank of a large liquid rocket, the structural characteristics of multi-layer brazed milling groove heat exchangers commonly used in rockets were analyzed.By analyzing the main factors affecting the accuracy of heat transfer calculation, a one-dimensional mathematical simulation heat transfer model was established, and a simplified calculation model was adopted for the heat transfer of local two-phase flow.The experimental results of heat exchanger show that the heat transfer calculation results are in good agreement with the experimental data, which indicates the rationality of the heat transfer model.Based on the experimental data, the simplified calculation model of two-phase flow is modified, which broadens the applicability of the heat transfer model and improves the calculation accuracy.The modified heat transfer model can be used for the preliminary optimization design of multi-layer brazed milling groove heat exchangers or heat exchangers with similar structures.
参考文献/References:
[1] 廖少英.液体火箭推进增压输送系统[M].北京:国防工业出版社,2007.
[2] 张超,鲁雪生,田丽亭.火箭低温液体推进剂增压系统数学模型[J].低温与超导,2005,33(2):35-38.
[3] DUSSOLLIER G,TEISSIER A.Ariane 5 main stage oxygen tank pressurization[C]//29th Joint Propulsion Conference and Exhibit.Reston,Virginia:AIAA,1993.
[4] 周昆颖.紧凑换热器[M].北京:中国石化出版社,1998.
[5] 张贵田.高压补燃液氧煤油发动机[M].北京:国防工业出版社,2005.
[6] 加洪.液体火箭发动机结构设计[M].任汉芬,颜子初,译.北京:宇航出版社,1992.
[7] CURRAN E T,MURTHY S N B.Scramjet propulsion 11 liquid hydrocarbon fuels for hypersonic propulsion[J].2001,10.2514/4.866609:757-822.
[8] HEISER W,PRATT D,DALEY D,et al.Hypersonic airbreathing propulsion[M].Reston,Virginia:AIAA,1994.
[9] 陶文铨.计算流体力学与传热学[M].北京:中国建筑工业出版社,1991.
[10] 杨世铭,陶文铨.传热学[M].4版.北京:高等教育出版社,2006.
[11] 凯斯,克拉福特.对流传热与传质[M].陈熙,翟殿春,译.北京:科学出版社,1986.
[12] 鲁钟琪.两相流与沸腾传热[M].北京:清华大学出版社,2002.
[13] 朱谷君.工程传热传质学[M].北京:航空工业出版社,1989.
[14] 阎昌琪.气液两相流[M].哈尔滨:哈尔滨工程大学出版社,1995.
[15] 陈虹,郑尧,常华伟,等.振动对水平管内液氢两相流影响的数值模拟[J].低温与超导,2018,46(5):8-12.
[16] 吴艳阳,刘利军,喻九阳,等.振动圆管内对流传热特性及场协同分析[J].石油化工设备,2011,40(6):1-5.
[17] 刘曌俞,王仙.氧换热器在两相流条件下的压力脉动机理分析[J].推进技术,2021,42(7):1501-1511.
[18] 栗俊芬.绕管换热器计算方法研究及软件开发[D].郑州:郑州大学,2016.
[19] 倪晓华,萧渊.板式换热器的换热与压降计算[J].流体机械,2002,30(3):22-25.
[20] 华绍曾,杨学宁.实用流体阻力手册[M].北京:国防工业出版社,1985.
备注/Memo
收稿日期:2022-02-16 修回日期:2022-06-19
基金项目:国家自然科学基金(52005385)
作者简介:刘军彦(1976—),男,硕士,高级工程师,研究领域为液体火箭发动机总体设计。
更新日期/Last Update:
1900-01-01