PDF下载分享

[1]张紫豪,吴继平,成鹏,等.结构参数对可调节针栓喷注器喷雾特性的影响[J].火箭推进,2022,48(05):9-17.
　ZHANG Zihao,WU Jiping,CHENG Peng,et al.Effects of structural parameters on the spray characteristics of variable pintle injectors[J].Journal of Rocket Propulsion,2022,48(05):9-17.

点击复制

结构参数对可调节针栓喷注器喷雾特性的影响

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 48 期数: 2022年05期页码: 9-17 栏目: 目次出版日期: 2022-10-25

Title:: Effects of structural parameters on the spray characteristics of variable pintle injectors

文章编号:: 1672-9374(2022)05-0009-09

作者:: 张紫豪¹; 2; 吴继平¹; 2; 成鹏¹; 2; 江燕平¹; 2; (1.国防科技大学空天科学学院,湖南长沙4100732.国防科技大学高超声速冲压发动机技术重点实验室,湖南长沙410073)

Author(s):: ZHANG Zihao¹; 2; WU Jiping¹; 2; CHENG Peng¹; 2; JIANG Yanping¹; 2; (1.College of Aeronautics and Astronautics, National University of Defense Technology, Changsha 410073, China 2.Science and Technology on Scramjet Laboratory, National University of Defense Technology, Changsha 410073, China)

关键词:: 变推力液体火箭发动机针栓喷注器喷雾特性阻塞比套筒扩张角雾化试验

Keywords:: throttling liquid rocket engine pintle injector spray characteristics blockage factor sleeve expansion angle atomization experiments

分类号:: TN95

文献标志码:: A

摘要:: 为揭示结构参数对可调节针栓喷注器喷雾特性影响规律,综合采用高速摄影和Malvern技术,对液/液针栓喷注器进行雾化试验,分析阻塞比、套筒扩张角等结构参数对流量系数、喷雾锥角和SMD等指标的影响。试验结果表明:阻塞比和套筒扩张角对流量系数影响较大动量比相同时,阻塞比对喷雾锥角、SMD及空间分布影响较为显著,是由于局部动量比改变所致,阻塞比越大,喷雾锥角越小,SMD越大喷雾越往下游发展,SMD越小套筒扩张角会对喷雾锥角、SMD产生影响,套筒扩张角越大,喷雾锥角越小,SMD越大,套筒扩张角降低至小于90°时,SMD会明显降低。通过上述结果可以发现,在一定的动量比下,采取氧化剂中心式针栓喷注器适当增大、燃料中心式针栓喷注器适当减小阻塞比和套筒扩张角的方法,可获取合适的喷雾空间分布和滴液尺寸,实现喷雾雾化性能的提升。

Abstract:: To reveal the influence of structural parameters on the spray characteristics of variable pintle injectors, the cold atomization experiments of liquid/liquid pintle injector were carried out by using high-speed photography and Malvern techniques.The effects of geometrical parameters, such as blockage factor and sleeve expansion angle on flow characteristics, spray angle and SMD were analyzed.The experimental results show that the geometrical parameters such as blockage factor and sleeve expansion angle have great influence on the flow coefficient.Under the same momentum ratio, the blockage factor has a significant effect on the spray angle, SMD and spatial distribution of SMD, which may be caused by the change of local momentum ratio.The further downstream the spray goes, the smaller the SMD is.Lager sleeve expansion angle leads to smaller spray angle and lager SMD.When the sleeve expansion angle is less than 90°, SMD will decrease significantly.From the above results, it can be found that at a certain momentum ratio, the proper spray distribution and droplet size were obtained by properly enlarging blockage factor and sleeve expansion angle of oxidant center pintle injector, or decreasing blockage factor and sleeve expansion angle of fuel center pintle injector, to improve the atomization performance.

参考文献/References:

[1] 安鹏,姚世强,王京丽,等.针栓式喷注器的特点及设计方法[J].导弹与航天运载技术,2016(3):50-54.
[2] DRESSLER G.Summary of deep throttling rocket engines with emphasis on Apollo LMDE[C]//42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit.Reston,Virginia:AIAA,2006.
[3] HARDGROVE J,KRIEG H.High performance throttling and pulsing rocket engine[C]//20th Joint Propulsion Conference.Reston,Virginia:AIAA,1984.
[4] DRESSLER G,TAO P.Kew divert propulsion technology verfication and risk reduction program[Z].1988.
[5] GROMSKI J,MAJAMAKI A,CHIANESE S,et al.Northrop grumman TR202 LOX/GH₂ deep throttling engine project status[C]//46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit.Reston,Virginia:AIAA,2010.
[6] 雷娟萍,兰晓辉,章荣军,等.嫦娥三号探测器7 500 N变推力发动机研制[J].中国科学(技术科学),2014,44(6):569-575.
[7] 岳春国,李进贤,冯喜平,等.针栓式变推力火箭发动机技术现状与发展探索[J].世界科技研究与发展,2008,30(5):609-612.
[8] 方昕昕,沈赤兵,成鹏,等.针栓式喷注器雾化特性试验[J].航空动力学报,2017,32(8):1853-1860.
[9] SON M,RADHAKRISHNAN K,KOO J,et al.Design procedure of a movable pintle injector for liquid rocket engines[J].Journal of Propulsion and Power,2016,33(4):858-869.
[10] SON M,YU K,KOO J,et al.Effects of momentum ratio and Weber number on spray half angles of liquid controlled pintle injector[J].Journal of Thermal Science,2015,24(1):37-43.
[11] ZHOU W Y,XU X,YANG Q C,et al.Experimental and numerical investigations on the spray characteristics of liquid-gas pintle injector[J].Aerospace Science and Technology,2022,121:107354.
[12] 龙治光,俞南嘉,蔡国飙,等.液氧/气甲烷针栓喷注器雾化特性数值研究[C]//第六届空天动力联合会议暨中国航天第三专业信息网第四十二届技术交流会暨2021航空发动机技术发展高层论坛论文集(第三册).成都:中国航天第三专业信息网,2022.
[13] LEE S J,KOO J,YOON Y.Effects of skip distance on the spray characteristics of a pintle injector[J].Acta Astronautica,2021,178:471-480.
[14] ZHANG Y,YU N J,TIAN H,et al.Experimental and numerical investigations on flow field characteristics of pintle injector[J].Aerospace Science and Technology,2020,103:105924.
[15] 金烜,沈赤兵,林森,等.数值模拟气液针栓式火箭发动机喷雾燃烧对声学激励的响应[J].国防科技大学学报,2021,43(5):36-45.
[16] CHENG P,LI Q L,CHEN H Y.Flow characteristics of a pintle injector element[J].Acta Astronautica,2019,154:61-66.
[17] NINISH S,VAIDYANATHAN A,NANDAKUMAR K.Spray characteristics of liquid-liquid pintle injector[J].Experimental Thermal and Fluid Science,2018,97:324-340.
[18] SAKAKI K,KAKUDO H,NAKAYA S,et al.Optical measurements of ethanol/liquid oxygen rocket engine combustor with planar pintle injector[C]//51st AIAA/SAE/ASEE Joint Propulsion Conference.Reston,Virginia:AIAA,2015.
[19] SAKAKI K,KAKUDO H,NAKAYA S,et al.Performance evaluation of rocket engine combustors using ethanol/liquid oxygen pintle injector[C]//52nd AIAA/SAE/ASEE Joint Propulsion Conference.Reston,Virginia:AIAA,2016.
[20] 陈慧源,李清廉,成鹏,等.针栓喷注器径向孔形状对喷雾特性影响实验研究[J].推进技术,2022,43(3):209-215.
[21] 陈慧源,李清廉,成鹏,等.动量比及其调节方式对针栓喷注器喷雾特性的影响[J].物理学报,2019,68(20):204704.
[22] SONG W,HWANG J,KOO J.Atomization of gelled kerosene by multi-hole pintle injector for rocket engines[J].Fuel,2021,285:119212.
[23] 曹建明.液体喷雾学[M].北京:北京大学出版社,2013.
[24] 何志勇,孙立宁,陈立国.Otsu准则下分割阈值的快速计算[J].电子学报,2013,41(2):267-272.
[25] MUGELE R A,EVANS H D.Droplet size distribution in sprays[J].Industrial & Engineering Chemistry,1951,43(6):1317-1324.
[26] 孙纪国.氢氧同轴式喷嘴流量特性试验和理论分析[J].航空动力学报,2005,20(4):689-692.
[27] BRUNNO B,HAIDN O.Effect of pintle injector element geometry on combustion in a liquid oxygen/liquid methane rocket engine[C]//7th European Conference for Aeronautics and Aerospace Sciences.Milan:[s.n.],2017.

备注/Memo

收稿日期:2022-04-17 修回日期:2022-05-19
基金项目:国家自然科学基金(11902351)
作者简介:张紫豪(1994—),男,硕士,助理研究员,研究领域为火箭及其组合推进技术。
通信作者:成鹏(1988—),男,博士,讲师,研究领域为火箭及其组合推进技术。

更新日期/Last Update: 1900-01-01