PDF下载 分享
[1]朱伟.气动装夹在试验工装中的利用[J].火箭推进,2005,31(04):54-57.
　Zhu Wei.Application of pneumatic equipment in test clamping apparatus[J].Journal of Rocket Propulsion,2005,31(04):54-57.
点击复制

气动装夹在试验工装中的利用

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 31 期数: 2005年04期 页码: 54-57 栏目: 出版日期: 2005-08-30
Title:
Application of pneumatic equipment in test clamping apparatus
作者:
朱伟；
陕西动力机械设计研究所陕西西安710100；
Author(s):
Zhu Wei
Shaanxi Power Machine Design and Research Institute, Xi’an 710100, China
关键词:
试验; 气动工装夹具; 试验系统
分类号:
V463
文献标志码:
A
摘要:
叙述了把气动装夹应用于试验工装,组成自动、半自动的工装夹具,从而给试验工作带来定位准确、快速装夹、维护方便等诸多优点。文中列举分析了一些利用气动装夹的试验范例,通过对原有夹具及改进后夹具的图解对比分析,进一步阐述气动装夹的利用价值及其广阔的应用空间。

相似文献/References:

[1]王一白,陆星宇,李 波,等.喷管分离流动模态转换过程壁压测量试验[J].火箭推进,2015,41(05):101.
　WANG Yibai,LU Xingyu,LI Bo,et al.Test of wall pressure during transition of flow separation modes in nozzle[J].Journal of Rocket Propulsion,2015,41(04):101.
[2]刘海丽,张立强,李学华,等.低比转速高速泵螺壳形式对性能影响分析[J].火箭推进,2015,41(03):52.
　LIU Hai-li,ZHANG Li-qiang,LI Xue-hua,et al.Influence of volute case type for low-specific-speed pump on pump performance[J].Journal of Rocket Propulsion,2015,41(04):52.
[3]刘海娃.一种姿控动力装置热防护研究[J].火箭推进,2014,40(05):37.
　LIU Hai-wa.Investigation of thermal protection for attitude control propulsion device[J].Journal of Rocket Propulsion,2014,40(04):37.
[4]李志勋,田健江,张彤.姿控发动机试验热流参数测量系统设计[J].火箭推进,2010,36(02):53.
　Li Zhixun,Tian Jianjiang,Zhang Tong.Design of heat flux measurement system of attitude control engine tests[J].Journal of Rocket Propulsion,2010,36(04):53.
[5]张增亭.金属膜片贮箱膜片的数值仿真与试验验证[J].火箭推进,2009,35(03):26.
　Zhang Zengting.Numerical simulation and test veritication ot diaphragm for metal diaphragm tank[J].Journal of Rocket Propulsion,2009,35(04):26.
[6]蒋瑜．王秋红.发动机试车控制软件工程化及质量管理[J].火箭推进,2008,34(04):60.
　Jiang Yui Wang Qiuhong.Approach for improving reliability of rocket engine test control software[J].Journal of Rocket Propulsion,2008,34(04):60.
[7]陈锦.泵水力试验测控系统故障模式分析[J].火箭推进,2006,32(02):46.
　Chen Jin.Analysis of malfunction mode of measure and control system for pump hydraulic test[J].Journal of Rocket Propulsion,2006,32(04):46.
[8]李伟民.液氧/煤油发动机试验起动过程推进剂供应技术[J].火箭推进,2006,32(03):56.
　Li Weimin.Technology of propellant supply in starting of LOX/kerosene engine testing[J].Journal of Rocket Propulsion,2006,32(04):56.
[9]刘成胜,李仁年.螺旋离心泵的外特性试验与流场数值分析[J].火箭推进,2005,31(05):22.
　Liu Chengsheng,Li Rennian.Experimental investigation of exterior performances and numerical analysis of flow field in a helix centrifugal pump[J].Journal of Rocket Propulsion,2005,31(04):22.
[10]陈颖.提高试车台配气系统减压器工作可靠性的措施[J].火箭推进,2005,31(05):63.
　Chen Ying.Reliability improvement measures for test stand gas supplying system[J].Journal of Rocket Propulsion,2005,31(04):63.

更新日期/Last Update: 1900-01-01