航天推进技术研究院主办
ZHANG Zhi-mei,ZHANG Quan-ming.Study on brazing mechanism of C/SiC ceramic matrix composite to Nb alloy[J].Journal of Rocket Propulsion,2012,38(02):63-67.
C/SiC陶瓷基复合材料与铌合金钎焊机理研究
- Title:
- Study on brazing mechanism of C/SiC ceramic matrix composite to Nb alloy
- 文章编号:
- 1672-9374(2012)02-0063-05
- 关键词:
- C/SiC陶瓷基复合材料; 活性钎焊; 润湿性
- 分类号:
- TG454-34
- 文献标志码:
- A
- 摘要:
- 阐述了C/SiC陶瓷基复合材料与铌合金的活性钎焊连接方式,通过扫描电镜、金相分析等手段,研究了钛基和铜基活性钎焊料分别在C/SiC陶瓷基复合材料和铌合金上的润湿性,并分析了两种材料的钎焊连接界面的微观元素扩散特征。研究结果表明,陶瓷基复合材料与铌合金的活性钎焊机理主要是通过钎焊料中的活性元素分别向陶瓷和铌合金中扩散并发生化学反应,从而实现三者之间的良好键合。
- Abstract:
- The active brazing method of C/SiC ceramic matrix composite to Nb alloy is discussed. The wettability of Ti- and Cu-based brazing alloys respective on C/SiC ceramic matrix composite and Nb alloy is studied, and the diffusion features of microcosmic elements on brazing connection interfaces of the two brazing alloys are investigated by the aid of scanning electron microscope (SEM) and metallographic phase analysis. The research results show that the active brazing mechanism of
参考文献/References:
[1]孙福. CMCS与金属的焊接接头设计与残余应力分析[D].西安: 西北工业大学, 2007.
[2]张勇. 陶瓷基复合材料C/SiC与低膨胀高温合金的高温钎焊[D]. 北京: 钢铁研究总院, 2008.
[3] 臧晓明. 用复合中间层连接SiC陶瓷(含C/SiC)和Ni基高温合金[D]. 北京: 北京航空航天大学, 2001.
[4]ZHANG Li-xia, FENG Ji-cai, LI Zhuo-ran. Numerical simulation of iron/TiC ceramic tappet brazed with TiZrNiCu filler metal[J]. Trans. Nonferrous Met. Soc. China, 2003, 13(6): 1367-1370.
[5]蒋志国, 罗新峰, 邹家生. Ti-Zr-Ni-Cu非晶钎料在Si3N4陶瓷上的润湿性研究[J]. 焊接技术, 2006, 35(6): 37-40.
[6]吕宏. SiC陶瓷活性钎焊连接[D]. 北京: 北京有色金属研究总院, 2004.
[7]张利, 李树杰, 张建军. SiC陶瓷连接工艺及焊接反应产物研究[J]. 稀有金属材料与工程, 2003, 32(3): 224-227.
备注/Memo
收稿日期:2011-11-28;修回日期:2012-01-21
基金项目:中国航天科技集团公司重大工艺专项(2008JY07)
作者简介:张枝梅(1984—),女,工程师,研究领域为材料金相分析