PDF下载 分享
[1]廖云龙,吴 剑.基于Riks方法的复合材料贮箱稳定性分析[J].火箭推进,2013,39(05):92-97.
　LIAO Yun-long,WU Jian.Stability analysis based on Riks method for composite material vessel[J].Journal of Rocket Propulsion,2013,39(05):92-97.
点击复制

基于Riks方法的复合材料贮箱稳定性分析

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 39 期数: 2013年05期 页码: 92-97 栏目: 测控与试验 出版日期: 2013-10-31
Title:
Stability analysis based on Riks method for composite material vessel
文章编号:
1672-9374(2013)05-0065-05
作者:
廖云龙; 吴 剑
上海空间推进研究所，上海 201112
Author(s):
LIAO Yun-long;  WU Jian
Shanghai Institute of Space Propulsion, Shanghai 201112, China
关键词:
Riks法; 复合材料; 压力容器; 失稳计算
Keywords:
Riks method;  composite material;  pressure vessel;  unstability calcula
分类号:
V434-34
文献标志码:
A
摘要:
探讨了Riks法计算原理，分析其计算复合材料贮箱失稳的应用性，并使用Abaqus求解器中的Riks方法对某贮箱的失稳算例进行分析。结果表明，使用Riks法进行非线性失稳计算具有工程实用意义。
Abstract:
The calculation principle of Riks method is presented in this paper. The practicability of unstability calculation for composite material vessel is analyzed. An unstable example of a composite material vessel was analyzed with Riks method in Abaqus. The result shows that it has practical significance to calculate the nonlinear unstability of composite material vessel by Riks method.

参考文献/References:

[1]王勖成, 邵敏. 有限单元法基本原理和数值方法[M]. 北京: 清华大学出版社.
[2]RIKS E. An incremental approach to the solution of solu- tion and buckling problems[J]. Solids and Structures, 1979(5): 765-801.
[3]POWELL G J. Improved iterative strategy for nonlinear structures[J]. International Journal for Numerical Methods in Engineering, 1981 (17): 1455-1467.
[4]CRISFIELD M A. A fast incremental/iteration solution procedure that handles‘snap-through’[J]. Computers and Structures, 1981 (1/3): 55-62.
[5]CRISFIELD M A. Snap-through and snap-back response in concrete structures and the dangers of under-integra- tion[J]. International Journal for Numerical Methods in Engineering, 1986 (1/3): 751-767.
[6]GIRISH J, RAMACHANDRA L S. Nonlinear static re- sponse and free vibration analysis of doubly curved cross-ply panels[J]. Journal of Aerospace Engineering, 2007 (20): 45-52.
[7]HU H T. Buckling optimization of fiber-composite laminate shells considering in-plane shear nonlinearity[J]. Structural and Multidisciplinary Optimization, 1994, 8(2/3): 168-173.
[8]陶伟明, 杨娅君. 内压作用下压力容器封头局部屈曲分析[J]. 机械工程学报, 2004 (7): 190-194.
[9]万力, 陶伟明. 由初始几何缺陷引起的薄壁压力容器在内压作用下的局部非线性屈曲[J]. 核动力工程, 2004 (5): 51-55.
[10]张彤, 汤国伟. 内压作用下碟形封头压力容器的弹塑性屈曲行为分析[J]. 化工机械, 2010 (7): 42-46.
[11]朱琳, 唐国安, 柳征勇, 等. 推进剂与贮箱液固耦合振动的动力学分析[J]． 振动与冲击, 2012, 31(5): 139-143.
[12]ABRAMSON H N． The dynamic behavior of liquids in moving containers[C]． Washington DC: NASA-SP-106，1966.
[13]周广文. 推进剂贮箱优化设计的思考[J]． 导弹与航天运载技术, 2011 (1): 26-28.
[14]刘文一, 米晓莉. 火箭发动机贮箱振动特性分析[J]． 装备环境工程, 2009, 6(6): 28-31.

相似文献/References:

[1]于 建,晏 飞.可重复使用运载器复合材料低温贮箱应用研究[J].火箭推进,2009,35(06):19.
　Yu Jian,Yan Fei.Study on application of composite cryogenic tank for reusable launch vehicle[J].Journal of Rocket Propulsion,2009,35(05):19.
[2]穆朋刚,刘文超,杜大华,等.复合材料桁架式机架设计方案[J].火箭推进,2019,45(02):26.
　MU Penggang,LIU Wenchao,DU Dahua,et al.Design scheme of composite truss frame[J].Journal of Rocket Propulsion,2019,45(05):26.
[3]张万卿,李洪春,史 勇.挖补法修补复合材料层压板压缩性能[J].火箭推进,2020,46(04):103.
　ZHANG Wanqing,LI Hongchun,SHI Yong.Research on compressive properties of composite laminates by patching repair[J].Journal of Rocket Propulsion,2020,46(05):103.
[4]蔡 强,赵晓宁,李新田,等.纤维缠绕复合材料压力容器多型封头对比分析[J].火箭推进,2020,46(06):90.
　CAI Qiang,ZHAO Xiaoning,LI Xintian,et al.Comparative analysis on multi-type domes of filament-wound composite pressure vessels[J].Journal of Rocket Propulsion,2020,46(05):90.

备注/Memo

收稿日期：2012-07-１2；修回日期：2012-12-24
作者简介：廖云龙（1985—），男，工程师，研究领域为结构仿真

更新日期/Last Update: 1900-01-01