PDF下载 分享
[1]纪艳卿,陈鹏荣.高强不锈钢离心轮浇冒口的设计与计算[J].火箭推进,2015,41(04):90-94.
　JI Yanqing,CHEN Pengrong.Design and calculation of casting head for high strength stainless steel centrifugal impeller[J].Journal of Rocket Propulsion,2015,41(04):90-94.
点击复制

高强不锈钢离心轮浇冒口的设计与计算

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 41 期数: 2015年04期 页码: 90-94 栏目: 工艺与材料 出版日期: 2015-09-30
Title:
Design and calculation of casting head for high strength stainless steel centrifugal impeller
作者:
纪艳卿; 陈鹏荣
西安航天发动机厂，陕西 西安 710100
Author(s):
JI Yanqing;  CHEN Pengrong
Xi’an Space Engine Factory, Xi’an 710100, China
关键词:
模数法; 冒口设计; 热节圆; 补缩能力
Keywords:
modulus methodcasting head designhotspot circlefeeding capacity
分类号:
V434.2-34
文献标志码:
A
摘要:
离心轮为重型运载液氧煤油发动机涡轮泵中的关键零件，结构复杂，材质为高强不锈钢S-04。工作时高速旋转，叶片型面与燃料直接接触，承受载荷大，对其尺寸精度和内部质量要求高，采用熔模铸造方法生产。为防止铸件热节部位出现缩孔、缩松缺陷，需要合理设计浇冒系统，保证铸件质量。采用模数法对离心轮铸件冒口进行设计与计算，并对冒口补缩能力进行校核，保证冒口有足够的金属液补缩铸件。经过实际生产验证，离心轮冒口实用可靠，铸件的热节部位得到了有效补缩，成功浇注出了高质量的离心轮铸件。离心轮工艺方案合理、有效，验证了用模数法设计与计算高强不锈钢离心轮浇冒口的准确性。
Abstract:
As the key part of LOX/kerosene engine turbopump for heavy launch vehicles, the centrifugal impeller is made of high strength stainless steel S-04 with complicated structure. When centrifugal impeller rotates at high speed, blade surfaces contact directly with the fuel, bearing high loads, which results in the high requirements of its dimension precision and internal quality. Therefore, investment casting was chosen for centrifugal impeller production. In order to prevent shrinkage cavity and porosity at casting hotspots, the casting head needs to be properly designed to guarantee casting quality. The centrifugal impeller casting head was designed and calculated via modulus method to check the casting head feeding capacity, ensuring enough molten metal to feed the casting. The produced centrifugal impeller casting was of high quality with practical and reliable casting head and effective feeding of casting hotspots. It's proved that the process plan for centrifugal impeller is proper and effective. The design and calculation accuracy of

参考文献/References:

[1]王春欢, 胡红军, 罗静. 基于Procsat软件的熔模铸造计算机模拟[J]. 铸造技术, 2007, 28(10): 1360-1362.
[2]秦宝荣, 王军锋, 范金桃. 碎纸刀熔模铸造充型凝固过程数值模拟[J]. 特种铸造及有色合金, 2010, 30(6): 533-5+94.
[3]方圆, 周吉祥, 于赟, 等. 耐热钢排气歧管熔模铸造的工艺优化[J]. 特种铸造及有色合金, 2013, 33(6): 539-542.
[4]李先民. 冒口的优化设计[J]. 四川轻化工学院学报, 2002, 15(3): 37-40.

[5]丛伟. 模数法在铸钢件冒口设计中的应用[J]. 沈阳航空工业学院学报, 2002, 19(4): 17-19.

[6]李魁盛. 铸造工艺及原理[M]. 北京: 机械工业出版社, 1989.
[7]HINE R W. Principles of metal castings[M]. 2nd ed. New York: MeGraw-Hill, 1967.
[8]王文清, 李魁盛. 铸造工艺学[M]. 北京: 机械工业出版社, 2002.
[9]魏兵, 袁森, 张卫华. 铸件均衡凝固技术及其应用[M]. 北京: 机械工业出版社, 1998.
[10]连炜, 朱延令, 魏兵. 抽油机曲柄铸铁件浇冒口系统当冒口的工艺设计[J]. 铸造技术, 2007, 28(5): 582-584.

备注/Memo

收稿日期：2014-11-08；修回日期：2015-03-02 作者简介：纪艳卿（1984—），男，工程师，研究领域为铸造工艺研究

更新日期/Last Update: 1900-01-01