航天推进技术研究院主办
[1]于京平,赵益春,代立民.低温安全阀密封设计研究[J].火箭推进,2015,41(06):55-60.
YU Jingping ZHAO Yichun DAI Limin.Study on sealing design of cryogenic safety valve[J].Journal of Rocket Propulsion,2015,41(06):55-60.
点击复制
YU Jingping ZHAO Yichun DAI Limin.Study on sealing design of cryogenic safety valve[J].Journal of Rocket Propulsion,2015,41(06):55-60.
低温安全阀密封设计研究
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
41
期数:
2015年06期
页码:
55-60
栏目:
研究与设计
出版日期:
2015-12-31
- Title:
- Study on sealing design of cryogenic safety valve
- 分类号:
- V433-34
- 文献标志码:
- A
- 摘要:
- 低温安全阀是一种自动阀门。正常工作时低温安全阀应能在长期超低温环境下利用自身的弹簧力形成良好的密封，但由于密封材料在低温环境发生不可避免的变形导致阀门容易出现泄漏。为了解决上述问题，根据低温安全阀的设计要求提出密封结构方案，并运用ANSYS有限元软件对低温安全阀结构方案、锥面密封结构等进行了数值仿真和应力分析，研究了密封块与阀座之间夹角、密封面锥角和密封中径对密封面接触应力和密封块强度的影响，并从中得出了低温安全阀密封材料的材料选择、密封结构的设计规范和关键尺寸的设计准则，根据该规范设计加工出的低温安全阀通过了标准规定的常温和低温试验，满足设计要求，该阀门已应用于液化天然气、空分、乙烯等工程领域。
- Abstract:
- Cryogenic safety valve is an automatic valve, which may form good sealing relying on its own spring force in the long-term ultralow temperature environment. However, its sealing material is inevitably deformed in the low temperature environment, which may make the valve to be prone to leakage. In order to solve the above problem, the sealing structure scheme is put forward in this article according to the design requirements of cryogenic safety valve. The ANSYS finite element software is used to conduct the numerical simulation and stress analysis for the structure scheme and cone seal structure of cryogenic safety valve. According to the research on the effect of the angle between the valve seat and sealing block, and sealing cone angle and seal pitch diameter on the contact stress and strength of the sealing block, the design specification of the sealing structure, Key dimensions and sealing materials selection specification of cryogenic safety valve were concluded. The cryogenic safety valves manufactured with the specification mentioned above passed through the normal atmospheric temperature and the cryogenic tests based on
参考文献/References:
[1]秦永涛，沈继彬，李建军，等. 低温气动阀动态响应特性的非线性分析方法[J]. 火箭推进, 2013 39(6): 23-28.
QIN Yong-tao, SHEN Ji-bin, LI Jian-jun, etc.Nonlinear analysis method for dynamic responding characteristics of cryogenic pneumatic valve[J]. Journal of Rocket Propul- sion,2013, 39(6): 23-28.
[2]路兰卿. 低温截止阀设计[J]. 低温工程, 2005 (6): 56-59.
[3]潘英朋, 伍永生, 高汉平. 低温气动阀的设计与分析[J]. 液压气动与密刻, 2011 (3): 55-58.
[4]吴堂荣, 唐勇, 孙晔, 等. LNG船用超低温阀门设计研究[J]. 船舶工程, 2010 (2): 73-78.
[5]吴狄. 低温阀密封结构的分析[J]. 阀门, 2014 (2): 28-29.
[6]鹿彪, 张立红. 低温阀门设计制造与检验[J]. 阀门, 1999 (3): 6-10.
[7]张教超,王敏庆, 李海飞. 齿形滑环式组合密封的有限元分析[J]. 润滑与密封, 2011 (5): 59-64.
相似文献/References:
[1]闫 峰,赵宏轩,余爱英.高压管路透镜垫连接件结构分析[J].火箭推进,2011,37(04):76.
YAN Feng,ZHAO Hong-xuan,YU Ai-ying.Structure analysis of lens spacer coupling in high-pressure pipeline[J].Journal of Rocket Propulsion,2011,37(06):76.
[2]闫峰.基于有限元软件ANSYS的扩压器强度分析[J].火箭推进,2007,33(06):38.
Yan Feng.Strength analysis of the diffuser by ANSYS FEM software[J].Journal of Rocket Propulsion,2007,33(06):38.
备注/Memo
收稿日期：2015-03-10；修回日期：2015-08-05 作者简介：于京平（1963—），女，工程师，研究领域为阀门开发与设计
更新日期/Last Update:
1900-01-01