航天推进技术研究院主办
Yuan xiaofeng,xu Hualong,chen shuhong.An optimized f.eature selection strategy in liquid rocket engine f.ault diagnosis[J].Journal of Rocket Propulsion,2008,34(06):1-5.
液体火箭发动机故障诊断中的特征优选策略
- Title:
- An optimized f.eature selection strategy in liquid rocket engine f.ault diagnosis
- Keywords:
- liquid mcket engine; rough set; fuzzy decision; greedy algorithm
- 分类号:
- V434
- 文献标志码:
- A
- 摘要:
- 针对液体火箭发动机故障诊断中的特征选择问题。提出了一类最小代价模糊决 策模型。在应用中,该模型能够融合各个故障特征参数的先验信息、故障程度,并允许故障 间的关联存在.从而比现有特征选择方法具有广泛的适用性,特征选择结果更贴近工程实际。 同时.给出了基于贪婪算法的模型求解方法,并对某发动机的故障特征集进行了特征优选实 验。实验证明了该方法的有效性。
- Abstract:
- Tb solve the pmblem of feature selection in liquid rocket engine fault diagnosis,a fuzzy decision model constrained by the minimum cost is pmposed in this paper.In this model,the pdor information of each feature and fault intensity is taken into consideration,and the association between difkrent faults is allowed.Accordingly,it is more nexible than other models,and the feature selection results are more suitable for engineering applica“ons.In addition,a greedy algorithm is pmvided to solve the model.Experiments on a feature set of a liquid rocket engine haVe Validated the effectiveness of the model.
参考文献/References:
[1]张惠军.液体火箭发动机故障检测与诊断技术综述[J].
火箭推进,2004,30(5):4045.
[2]刘冰,张育林.液体火箭发动机故障诊断中的特征选择
[J].推进技术,1998,19(2):5—8.
[3]张育林,吴建军,朱恒伟,等.液体火箭发动机健康监控
技术[M].长沙:国防科技大学出版社,1998.
[4]胡小平,张丽娟,王艳梅,等.液体火箭发动机故障检测和
诊断中数据挖掘策略的分析[J].国防科技大学学报,2005,
27(3):l一5.
[5]乔斌.粗糙集理论分层递阶约简算法的研究[D].杭州:
浙江大学.2003.
[6]张文修,仇国芳.基于粗糙集的不确定决策[M].北京:清
华大学出版社,2005.
[7]Zhang Mei,Wu Weizhi.Knowledge Reduction in lnformation
Systems with Fuzzy Decisions[J].J0umal of Engi-
neering Mathematics.2003,20(2):53—58.
相似文献/References:
[1]郑 伟,李护林,陈新红.激光快速成形技术在液体动力领域的应用前景[J].火箭推进,2015,41(06):1.
ZHENG Wei,LI Hulin,CHEN Xinhong.Application prospect of laser rapid prototyping
technology in the field of liquid power[J].Journal of Rocket Propulsion,2015,41(06):1.
[2]郭 敬,宋晶晶,孔凡超.发动机推进剂增压输送系统建模仿真技术综述[J].火箭推进,2015,41(05):1.
GUO Jing,SONG Jingjing,KONG Fanchao.Overview of modeling and simulation technology
for propellant pressurization feed system
of liquid rocket engine[J].Journal of Rocket Propulsion,2015,41(06):1.
[3]于 康,谢荣华,陈晓江.表面张力贮箱电子束焊接工艺研究[J].火箭推进,2015,41(05):89.
YU Kang,XIE Ronghua,CHEN Xiaojiang.Study on electron beam welding process
for surface tension tank[J].Journal of Rocket Propulsion,2015,41(06):89.
[4]刘中华,苏 晨,汪军安,等.气路膜片设计研究[J].火箭推进,2015,41(05):95.
LIU Zhonghua,SU Chen,WANG Junan,et al.Design and study of pneumatic diaphragm in gas circuit[J].Journal of Rocket Propulsion,2015,41(06):95.
[5]薛 薇,蔡震宇,曹红娟,等.基于可视化平台的液氢/液氧火箭发动机核心部件质量计算[J].火箭推进,2015,41(04):61.
XUE wei,CAI Zhenyu,CAO Hongjuan,et al.Mass calculation of key assembly units in
LH2/ LOX rocket engine based on visual interface[J].Journal of Rocket Propulsion,2015,41(06):61.
[6]穆朋刚,童 飞,蒲光荣,等.温度对贮箱增压系统的影响分析[J].火箭推进,2015,41(04):74.
MU Penggang,TONG Fei,PU Guangrong,et al.Influence of temperature on tank pressurization system[J].Journal of Rocket Propulsion,2015,41(06):74.
[7]高朝辉,刘 宇,肖 肖,等.垂直着陆重复使用运载火箭对动力技术的挑战[J].火箭推进,2015,41(03):1.
GAO Zhao-hui,LIU Yu,et al.Challenge to propulsion technology for vertical
landing reusable launch vehicle[J].Journal of Rocket Propulsion,2015,41(06):1.
[8]申智帅,等.气动增压器技术及其在空间推进系统的应用[J].火箭推进,2015,41(03):15.
SHEN Zhi-shuai,RUAN Hai-jun,et al.Pneumopump technology and its application
in space propulsion system[J].Journal of Rocket Propulsion,2015,41(06):15.
[9]张 翔,徐洪平,安雪岩,等.液体火箭发动机稳态运行故障
数据聚类分析研究0[J].火箭推进,2015,41(02):118.
ZHANG Xiang,XU Hong-ping,AN Xue-yan,et al.Clustering analysis for fault data in steady process of
liquid propellant rocket engine[J].Journal of Rocket Propulsion,2015,41(06):118.
[10]窦 唯,闫宇龙,金志磊,等.某发动机涡轮泵转子高温超速/疲劳试验研究[J].火箭推进,2015,41(01):15.
DOU Wei,YAN Yu-long,JIN Zhi-lei,et al.Fatigue experiment of turbo-pump rotor at
over-speed and high temperature condition[J].Journal of Rocket Propulsion,2015,41(06):15.
备注/Memo
收稿日期:2008—04—22;修回日期:2008-06—30。 作者简介:袁晓峰(1975一),男,博士生,工程师,研究领域为数据挖掘与故障诊断。