PDF下载 分享
[1]于 建,晏 飞.可重复使用运载器复合材料低温贮箱应用研究[J].火箭推进,2009,35(06):19-22.
　Yu Jian,Yan Fei.Study on application of composite cryogenic tank for reusable launch vehicle[J].Journal of Rocket Propulsion,2009,35(06):19-22.
点击复制

可重复使用运载器复合材料低温贮箱应用研究

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 35 期数: 2009年06期 页码: 19-22 栏目: 研究与设计 出版日期: 2009-12-30
Title:
Study on application of composite cryogenic tank for reusable launch vehicle
作者:
于 建; 晏 飞
上海空间推进研究所，上海 200233
Author(s):
Yu Jian;  Yan Fei
Shanghai Institute of Space Propulsion, Shanghai 200233, China
关键词:
复合材料; 低温贮箱; 可重复使用运载器
分类号:
V421.3
文献标志码:
A
摘要:
轻质高强度低温贮箱是发展可重复使用运载器（RLV）的关键技术之一。本文论证了聚合物复合材料作为低温贮箱材料的必要性和可行性，介绍了复合材料低温贮箱的研制现状，对聚合物基体和纤维选择、设计技术、复合材料的成型及其性能测试等进行了探讨，指出了复合材料低温贮箱的发展趋势，并就我国复合材料低温贮箱的发展给出了建议。
Abstract:
Development of the light-weight and high-strength tank for low temperature condition is one of the key areas of reusable launch vehicle(RLV) in the future. The advantages and feasibility of cryogenic composite tank are presented , and the development status of the tank is described. The discussions are focused on the selection of resins and fibers, design technology，the shapement of composite materials, and their complex performance tests. The development trend and the advices in the future are pointed out.

参考文献/References:

[1] 吴燕生. 中国航天运输系统的发展与未来[J].导弹与航天运载技术, 2007, (5): 1-4.
[2] 张登成, 唐硕. 美国重复使用运载器的发展历史、现状及启示[J]. 导弹与航天运载技术, 2003, (5): 20-27.
[3] 康开华, 才满瑞. 欧洲下一代运载器研制计划[J]. 导弹与航天运载技术. 2008, (4): 26-30.

相似文献/References:

[1]廖云龙,吴 剑.基于Riks方法的复合材料贮箱稳定性分析[J].火箭推进,2013,39(05):92.
　LIAO Yun-long,WU Jian.Stability analysis based on Riks method for composite material vessel[J].Journal of Rocket Propulsion,2013,39(06):92.
[2]穆朋刚,刘文超,杜大华,等.复合材料桁架式机架设计方案[J].火箭推进,2019,45(02):26.
　MU Penggang,LIU Wenchao,DU Dahua,et al.Design scheme of composite truss frame[J].Journal of Rocket Propulsion,2019,45(06):26.
[3]张 浩,王 帅,耑 锐,等.过冷度对飞行器贮箱热力学排气系统性能的影响[J].火箭推进,2020,46(04):74.
　ZHANG Hao,WANG Shuai,ZHUAN Rui,et al.Effect of subcooled degree on performance of thermodynamic vent system in spacecraft tank[J].Journal of Rocket Propulsion,2020,46(06):74.
[4]张万卿,李洪春,史 勇.挖补法修补复合材料层压板压缩性能[J].火箭推进,2020,46(04):103.
　ZHANG Wanqing,LI Hongchun,SHI Yong.Research on compressive properties of composite laminates by patching repair[J].Journal of Rocket Propulsion,2020,46(06):103.
[5]蔡 强,赵晓宁,李新田,等.纤维缠绕复合材料压力容器多型封头对比分析[J].火箭推进,2020,46(06):90.
　CAI Qiang,ZHAO Xiaoning,LI Xintian,et al.Comparative analysis on multi-type domes of filament-wound composite pressure vessels[J].Journal of Rocket Propulsion,2020,46(06):90.

备注/Memo

收稿日期：2009-07-17；修回日期：2009-10-16。
作者简介： 于建（1981—），男，硕士，工程师，研究领域为空间系统压力容器设计与分析。

更新日期/Last Update: 1900-01-01