航天推进技术研究院主办
Liu Yongxing,Wang Kui,Cao Zaiyong.Investigation of GO2/kerosene thrust chamber of the main rocket engine for the RBCC propulsion system[J].Journal of Rocket Propulsion,2009,35(06):23-26.
RBCC推进系统主火箭发动机气氧/煤油推力室研究
- Title:
- Investigation of GO2/kerosene thrust chamber of the main rocket engine for the RBCC propulsion system
- 分类号:
- V437
- 文献标志码:
- A
- 摘要:
- 为满足RBCC推进系统主火箭发动机对气氧/煤油推力室的要求,对其进行了高燃烧室压力和温度、大范围变工况工作研究。气氧/煤油推力室喷注器采用中心区气液双组元内混式喷嘴和边区直流喷嘴结合结构,身部采用夹层冷却结构。通过对推力室气氧/煤油推进剂的点火及雾化混合技术、推力室喷注器及身部冷却设计技术、推力室的点火启动、稳态工作等关键技术的研究表明,推力室在室压3MPa、5MPa工况下可稳定燃烧。额定推力650N的气氧/煤油推力室方案可靠、点火工作正常,可以满足大范围变工况稳定工作要求。
- Abstract:
- To meet the requirements of the main rocket engine of RBCC propulsion system for GO2/kerosene thrust chamber, an investigation of the thrust chamber with work condition changed at a large range and in high combustion pressure and high temperature was conducted. The centre of the thrust chamber injector was one injecting element with inside gas and liquid propellant mixing. The periphery of the thrust chamber injector was spray injecting elements. The important technologies included the ignition of GO2/kerosene propellant, mixing and atomizing of propellant, design of the injector, cooling of its body, design of start, and combustion of two phase stable flow. The results of the investigation show that combustion of the thrust chamber is steady when the chamber pressure changes from 3MPa to 5MPa. The design of the thrust chamber is successful and the thrust chamber works well
参考文献/References:
[1]Francis M Curran,Gary L Bennett. An Overview of the NASA Advanced Propulsion Concepts Program [R]. AIAA 92-3216.
[2]张蒙正. 组合循环动力系统面临的挑战与前景[J]. 火箭推进, 2009, 35(1): 1-8.
[3]王爱玲. 运载火箭气氧/煤油姿控发动机技术研究[J]. 上海航天, 2006, 5: 6-11.
[4]Rocketdyne Engineering. Advanced ignition systems final report [R]. N71-35152.
[5]吕奇伟. 气氧/煤油谐振点火器研究[J]. 火箭推进, 2001, 27(4): 54-60.
[6]张贵田. 高压补燃液氧煤油发动机[M]. 北京: 国防工业出版社, 2005.
[7]阿列玛索夫B E. 火箭发动机原理[M]. 北京: 宇航出版社, 1993.
相似文献/References:
[1]李永洲,刘晓伟,张蒙正,等.马赫数2.5~7.0的二元变几何进气道设计[J].火箭推进,2015,41(05):17.
LI Yongzhou,LIU Xiaowei,ZHANG Mengzheng,et al.Design of a two dimensional variable geometry
inlet with Mach number 2.5~7.0[J].Journal of Rocket Propulsion,2015,41(06):17.
[2]霍世慧,袁军社,徐学军,等.双推力室机架快速优化设计方法研究[J].火箭推进,2015,41(04):55.
HUO Shihui,YUAN Junshe,XU Xuejun,et al.A rapid optimization design method for frame structure
of double thrust chambers[J].Journal of Rocket Propulsion,2015,41(06):55.
[3]沈传兵,苏 杭,朱子勇.基于PLC和WinCC的火箭发动机热真空试验控制系统[J].火箭推进,2015,41(03):93.
SHEN Chuan-bing,SU Hang,ZHU Zi-yong.Control system for liquid rocket engine heat-vacuum
test based on PLC and WinCC[J].Journal of Rocket Propulsion,2015,41(06):93.
[4]张蒙正,张 玫,严俊峰,等.RBCC动力系统工作模态问题[J].火箭推进,2015,41(02):1.
ZHANG Meng-zheng,ZHANG Mei,YAN Jun-feng,et al.Discussion about work modal of RBCC power system[J].Journal of Rocket Propulsion,2015,41(06):1.
[5]刘万龙,牛向楠,李全令,等.一种姿轨控发动机地面试验控制系统设计[J].火箭推进,2015,41(02):114.
LIU Wan-long,NIU Xiang-nan,LI Quan-ling,et al.Design of a ground test control system for attitude
and orbital control engine[J].Journal of Rocket Propulsion,2015,41(06):114.
[6]王洪信,徐 旭.火箭基组合循环发动机性能迭代算法研究[J].火箭推进,2015,41(01):56.
WANG Hong-xin,XU Xu.Research on performance iterative algorithm of
rocket based combined cycle engine[J].Journal of Rocket Propulsion,2015,41(06):56.
[7]张蒙正,李 斌,王 君,等.关于RBCC动力系统的思考[J].火箭推进,2013,39(01):1.
ZHANG Meng-zheng,LI Bin,WANG Jun,et al.Thinking about RBCC propulsion system[J].Journal of Rocket Propulsion,2013,39(06):1.
[8]路媛媛,张蒙正,严俊峰.火箭推力室喷管内激波对RBCC性能影响分析[J].火箭推进,2013,39(05):46.
LU Yuan-yuan,ZHANG Meng-zheng,YAN Jun-feng.Influences of shock wave in rocket nozzle on RBCC performance[J].Journal of Rocket Propulsion,2013,39(06):46.
[9]段文浩,于 涛,杨 莹.辐射式热流测量系统及其应用[J].火箭推进,2014,40(01):85.
DUAN Wen-hao,YU Tao,YANG Ying.Radiant heat flux measuring system and its application[J].Journal of Rocket Propulsion,2014,40(06):85.
[10]燕 珂,单世群,王莉红,等.液体推进剂热稳定性研究方法探讨[J].火箭推进,2014,40(02):90.
ZHANG Meng-zheng,LI-Bin,LU Yuan-yuan.Thinking about thrust and resistance characteristics of RBCC power system adapting to rectangle section flow passage[J].Journal of Rocket Propulsion,2014,40(06):90.
备注/Memo
收稿日期:2009-10-15;修回日期:2009-11-05。
作者简介: 刘永兴(1976—),男,工程师,研究领域为火箭发动机推力室设计。