PDF下载 分享
[1]穆小强,陈祖奎,宁继荣,等.海绵表面张力管理装置的设计与分析[J].火箭推进,2010,36(05):13-16.
　MU Xiao-qiang,CHEN Zu-kui,NING Ji-rong,et al.Design and analysis for the sponge surface tension propellant management device[J].Journal of Rocket Propulsion,2010,36(05):13-16.
点击复制

海绵表面张力管理装置的设计与分析

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 36 期数: 2010年05期 页码: 13-16 栏目: 研究与设计 出版日期: 2010-10-15
Title:
Design and analysis for the sponge surface tension propellant management device
文章编号:
(2010)05-0013-0５
作者:
穆小强; 陈祖奎; 宁继荣; 马键
西安航天动力研究所，陕西 西安 710100
Author(s):
MU Xiao-qiang;  CHEN Zu-kui;  NING Ji-rong;  MA Jian
Xi’an Aerospace Propulsion Institute, Xi’an 710100, China
关键词:
海绵表面张力管理装置; 设计; 分析
Keywords:
sponge surface tension propellant management device;  design;  analysis
分类号:
V434-33
文献标志码:
A
摘要:
介绍了一种推进剂管理装置——海绵表面张力管理装置。阐述了该管理装置的结构组成和工作原理，对该管理装置进行了设计和分析。概述了相关试验考核情况。试验结果表明：该管理装置的性能满足设计要求。该装置可推广应用于其它类似系统。
Abstract:
A surface tension propellant management device called sponge is introduced in this paper. The structure and working principle are elaborated. The design and analysis of propellant management are performed. The experimentation of the management device is summarized. The experimental result indicates that the performance of the production accords with the requirement of design. The device can be used in other similar systems

相似文献/References:

[1]史 锻,胡小平,于 萌,等.CBR方法在液体火箭发动机推力室设计中的应用[J].火箭推进,2015,41(03):39.
　SHI Duan,HU Xiao-ping,YU Meng,et al.Application of case-based reasoning method in design of thrust chamber of liquid rocket engine[J].Journal of Rocket Propulsion,2015,41(05):39.
[2]宁继荣,陈祖奎,马 键,等.可再充填启动篮表面张力推进剂管理装置设计及试验研究[J].火箭推进,2011,37(02):25.
　NING Ji-rong,CHEN Zu-kui,MA Jian,et al.Design and test of refillable start-basket surface tension PMD[J].Journal of Rocket Propulsion,2011,37(05):25.
[3]梁树强,覃粒子,林震,等.高室压脉冲推力器设计与实验研究[J].火箭推进,2009,35(04):8.
　Liang Shuqiang,Qin Lizi,Lin Zhen,et al.Design and experiment of a pulse thruster with high combustion chamber pressure[J].Journal of Rocket Propulsion,2009,35(05):8.
[4]程亚威,李小明,陈维宇,等.液氧主阀的方案及设计[J].火箭推进,2007,33(02):17.
　Cheng Yawei,Li Xiaoming,Chen Weiyu.The scheme of main liquid oxygen valve[J].Journal of Rocket Propulsion,2007,33(05):17.
[5]唐云龙,代玉东.液氧/煤油发动机地面试验故障紧急关机系统研制[J].火箭推进,2005,31(01):47.
　TangYunlong,DaiYüdong.Development of test fault emergency cut-off system for LOX/kerosene engine ground test[J].Journal of Rocket Propulsion,2005,31(05):47.
[6]马杰伟.火箭发动机的正反转涡轮设计[J].火箭推进,2004,(02):54.
[7]庄宿国,王良,常涛,等.高性能旋转动密封环设计研究[J].火箭推进,2016,42(01):44.
　ZHUANG Suguo,WANG Liang,CHANG Tao,et al.Design research of high-performance rotary sealing ring[J].Journal of Rocket Propulsion,2016,42(05):44.
[8]程帆,张波.高压气动电磁阀可靠性改进设计[J].火箭推进,2017,43(01):50.
　CHENG Fan,ZHANG Bo.Design for reliability improvement of high-pressure pneumatic solenoid valve[J].Journal of Rocket Propulsion,2017,43(05):50.

备注/Memo

收稿日期：2010-０8-１0；修回日期：2010-0８-20
作者简介： 穆小强（1982—），男，工程师，研究领域为液体火箭推进系统

更新日期/Last Update: 1900-01-01