航天推进技术研究院主办
ZHOU Hong-ling,JIANG Wen-long,et al.Development of liquid apogee engine for satellite at home and abroad[J].Journal of Rocket Propulsion,2011,37(05):1-8.
国内外卫星用液体远地点发动机发展综述
- Title:
- Development of liquid apogee engine for satellite at home and abroad
- 文章编号:
- 1672-9374(2011)05-0001-08
- Keywords:
- liquid apogee engine; thruster; specific impulse; rhenium/iridium
- 分类号:
- V434-34
- 文献标志码:
- A
- 摘要:
- 综述了国内外卫星用液体远地点发动机的发展情况,阐述了国外几种典型远地点发动机和国内三代490 N发动机的主要技术特点和技术指标,对比分析了其产品性能并介绍了其产品的考核应用情况。自上世纪90年代以来,国内外在卫星用液体远地点发动机的研制中喷注器性能不断提高,推力室均采用了新型抗高温氧化材料,主要以铼/铱材料和C/SiC复合材料为主,最终实现了发动机真空比冲性能的不断提高。先进的液体远地点发动机采用高性能喷注器和新型抗高温氧化材料,其比冲性能指标已高达323 s以上。
- Abstract:
- The technology characteristics and development trend of liquid apogee engines for satellites at home and abroad are summarized in this paper. The performance specification and the application of the typical engines abroad and the 490 N engines of three generations made in China are introduced. Since 1990s, the performance of the injectors in liquid apogee engines for satellites has been increasingly improved, and all the thrusters have adopted new type high-temperature oxidation resistant materials such as iridium/rhenium and C/SiC composite materials. Benefiting from the modified injectors and new materials, the performance of the liquid apogee engine has been significantly improved, and its specific impulse is up to 323 s.
参考文献/References:
[1] HENDERSON S, STECHMAN C. Performance results for the advanced materials bipropellant rocket (AMBR) engine, AIAA2010-6883 [R]. USA: AIAA, 2010.
[2]STECHMAN C, HARPER S. Performance improvements in small earth storable rocket engines-an era of approaching the theoretical, AIAA2010-6684 [R]. USA: AIAA, 2010.
[3]STECHMAN C, WOLL P. A high performance liquid rocket engine for satellite main propulsion, AIAA2000-3161 [R]. USA: AIAA, 2000.
[4]WU P K, WOLL P, STECHMAN C. Qualification testing of 2nd generation high performance apogee thruster, AIAA2001-3253 [R]. USA: AIAA, 2001.
[5]SCHOENMAN L, ROSENBERG S D. Test experience,490N high performance [321 Sec Isp] engine, AIAA92-3800 [R]. USA: AIAA, 1992.
[6]ONO D K. The design, development, and qualification of an advanced columbium liquid apogee engine, AIAA98-3671 [R]. USA: AIAA, 1998.
[7]SCHULTE G. High performance 400N MMH/NTO bipropellant engine for apogee boost maneuvers, AIAA99-2466 [R]. USA: AIAA, 1999.
[8]胡昌义, 郑德国. CVD铱涂层/铼基复合喷管研究进展[J]. 宇航材料工艺, 1998, 19(3): 7-10.
[9]STECHAMN C. Off-limit testing of the model R-4D 110 lbf (490N) bipropellant rocket engine, AIAA2004-3694 [R]. USA: AIAA, 2004.
[10]SCHULTE G. High performance 400N MMH/NTO bipropellant engine for apogee boost maneuvers, AIAA99-2466 [R]. USA: AIAA, 1999.
[11] FICK M. Status and current developments of astrium's 400N bipropellant engine, AIAA 2003-4778[R]. USA: AIAA, 2003.
[12]REED B D. High temperature oxidation behavior of iridium-rhenium alloys, AIAA 94-2893[R]. USA: AIAA, 1994.
[13]FORTIN A J. Advanced materials for chemical propulsion:oxide-iridium/rhenium combustion chambers, AIAA94-2894 [R]. USA: AIAA, 1994.
[14]TUFFIAS R H. Engineering issues of iridium rhenium rocket engines revisited, AIAA 99-2752[R]. USA: AIAA, 1999.
[15]KRISMER D. Qualification testing of a high performance bipropellant rocket engine using MON-3 and hydrazine, AIAA 2003-4775 [R]. USA: AIAA, 2003.
[16]刘志泉, 马武军. C/SiC复合材料推力室应用研究[J]. 火箭推进, 2011, 37(2): 19-24.
相似文献/References:
[1]周 伟.某膨胀循环发动机推力室冷却结构流场仿真分析[J].火箭推进,2015,41(02):63.
ZHOU Wei.Flow field simulation analysis of cooling configuration
in thrust chamber of an expander cycle engine[J].Journal of Rocket Propulsion,2015,41(05):63.
[2]郭灿琳,卢 钢,陈建华,等.喷嘴式隔板与纵向肋式隔板阻尼效应分析[J].火箭推进,2013,39(03):32.
GUO Can-lin,LU Gang,CHEN Jian-hua,et al.Analysis on damping effect of vibration baffles with protruded injectors and longitudinal ribs[J].Journal of Rocket Propulsion,2013,39(05):32.
[3]孙永奇,李宝荣,杨建文.上面级发动机推力室喷管延伸段气膜冷却研究[J].火箭推进,2013,39(04):13.
SUN Yong-qi,LI Bao-rong,YANG Jian-wen.Research on gas film cooling at nozzle extension section of thrust chamber for upper stage engine[J].Journal of Rocket Propulsion,2013,39(05):13.
[4]高翔宇,孙纪国,田 原.缩比推力室甲烷传热试验研究[J].火箭推进,2013,39(04):19.
GAO Xiang-yu,SUN Ji-guo,TIAN Yuan.Experimental study on methane heat transfer test system[J].Journal of Rocket Propulsion,2013,39(05):19.
[5]燕 珂,单世群,王莉红,等.液体推进剂热稳定性研究方法探讨[J].火箭推进,2014,40(02):90.
ZHANG Meng-zheng,LI-Bin,LU Yuan-yuan.Thinking about thrust and resistance characteristics of RBCC power system adapting to rectangle section flow passage[J].Journal of Rocket Propulsion,2014,40(05):90.
[6]宣智超,刘中祥,齐 戎.膨胀循环发动机推力室传热优化[J].火箭推进,2012,38(06):8.
XUAN Zhi-chao,LIU Zhong-xiang,QI Rong.Heat transfer optimization of thrust chamber in expansion cycle engine[J].Journal of Rocket Propulsion,2012,38(05):8.
[7]李 强,聂 嵩,刘业奎,等.过氧化氢/煤油发动机推力室气液燃烧数值模拟[J].火箭推进,2011,37(04):35.
LI Qiang,NIE Song,LIU Ye-kui,et al.Numerical simulation of combustion characteristicsfor thrust chamber in hydrogen peroxide/kerosene engine[J].Journal of Rocket Propulsion,2011,37(05):35.
[8]姜文龙,杨成虎,林庆国.高性能卫星用490 N轨控发动机研究进展[J].火箭推进,2011,37(06):9.
JIANG Wen-long,YANG Cheng-hu,LIN Qing-guo.Development of high performance 490 N apogee engine for satellites[J].Journal of Rocket Propulsion,2011,37(05):9.
[9]李丹琳,栾叶君,孙纪国.液氧/甲烷气液喷注器试验研究[J].火箭推进,2010,36(04):59.
Experimental investigation on LOX/CH4 subscale thrust chamber[J].Journal of Rocket Propulsion,2010,36(05):59.
[10]杜大华,吴静杰,段捷.液体火箭发动机推力室极限承载能力研究[J].火箭推进,2010,36(05):40.
DU Da-hua,WU Jing-jie,DUAN Jie.Analysis of loading limit of the LRE thrust chamber[J].Journal of Rocket Propulsion,2010,36(05):40.
备注/Memo
收稿日期:2011-07-13;修回日期:2011-09-06
作者简介:周红玲(1968—),女,研究员,研究领域为空间推进系统工程