PDF下载 分享
[1]潘 亮,聂 嵩,刘业奎.环槽式过氧化氢/煤油气液喷注器研究[J].火箭推进,2012,38(03):23-28.
　PAN Liang,NIE Song,LIU Ye-kui.Investigation of circular slot hydrogen peroxide/kerosene injector[J].Journal of Rocket Propulsion,2012,38(03):23-28.
点击复制

环槽式过氧化氢/煤油气液喷注器研究

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 38 期数: 2012年03期 页码: 23-28 栏目: 研究与设计 出版日期: 2012-06-15
Title:
Investigation of circular slot hydrogen peroxide/kerosene injector
文章编号:
1672-9374(2012)03-0023-06
作者:
潘 亮; 聂 嵩; 刘业奎
北京航天动力研究所，北京 100076
Author(s):
PAN Liang;  NIE Song;  LIU Ye-kui
Beijing Aerospace Propulsion Institute, Beijing 100076, China
关键词:
过氧化氢/煤油; 喷注器; 数值模拟; 试验
Keywords:
hydrogen peroxide/kerosene;  injector;  numerical simulation;  test
分类号:
V434.3-34
文献标志码:
A
摘要:
对环槽式过氧化氢/煤油气液喷注器进行了理论分析和数值仿真计算。介绍了环槽式过氧化氢/煤油气液喷注器热试车情况，试验燃烧室压力1～2 MPa，混合比7～9，获得了燃烧效率、点火性能、燃烧稳定性、喷嘴特性及混合比等重要参数。
Abstract:
The circular slot hydrogen peroxide/kerosene injector is analysed theoretically and modeled numerically in this paper. The hot tests of the hydrogen peroxide/kerosene injector are presented, in which the chamber pressure is 1~2 MPa and the mixture ratio is 7~9. Some key parameters such as combustion efficiency, ignition characteristics, combustion stability, nozzle characteristics and mixture ratio were obtained.

参考文献/References:

[1]BUTLER K. AR2-3 engine refurbishment and gas genera-

相似文献/References:

[1]杨成虎,林庆国,刘昌国.高性能液体远地点发动机技术发展[J].火箭推进,2013,39(04):1.
　YANG Cheng-hu,LIN Qing-guo,LIU Chang-guo.Technology development of high-performance liquid apogee engine[J].Journal of Rocket Propulsion,2013,39(03):1.
[2]唐虎,张涛,刘昌渡.变推力发动机仿真计算分析[J].火箭推进,2008,34(05):1.
　Tang Hu,Zhang Tao,Liu Changbo.Computational analysis of a variable-thrust engine[J].Journal of Rocket Propulsion,2008,34(03):1.
[3]沈赤兵,李清廉,罗世彬,等.三组元火箭发动机推力室试验研究[J].火箭推进,2006,32(05):1.
　Shen Chibing,Li Qinglian,Luo Shibin,et al.Experimental research on the thrust chamber of tripropellant rocket engine[J].Journal of Rocket Propulsion,2006,32(03):1.
[4]王朋军.过氧化氢/煤油发动机试验中压差式孔板流量计的设计[J].火箭推进,2005,31(04):50.
　Wang Pengjun.Design and application of differential pressure orifice flowmeter in H2O2/kerosene engine test[J].Journal of Rocket Propulsion,2005,31(03):50.
[5]仲伟聪.液氧/甲烷液体火箭发动机燃烧研究最新进展[J].火箭推进,2004,(01):52.
[6]权琳琳,翟绘丰,叶 晖.喷注器钎焊镍镀层均匀性控制[J].火箭推进,2020,46(05):94.
　QUAN Linlin,ZHAI Huifeng,YE Hui.Study on uniformity control of nickel coating for injector brazing[J].Journal of Rocket Propulsion,2020,46(03):94.
[7]宋 凡,周 杰,徐晓丹,等.轨控发动机不锈钢喷注器扩散钎焊工艺[J].火箭推进,2021,47(01):90.
　SONG Fan,ZHOU Jie,XU Xiaodan,et al.Process of TLP welding of stainless steel injector in orbit-control engine[J].Journal of Rocket Propulsion,2021,47(03):90.

备注/Memo

收稿日期：2011-11-14；修回日期：2011-12-24
基金项目：国家“863”项目（2006AA705308）
作者简介：潘亮（1980—），女，工程师，研究领域为液体火箭发动机推力室设计

更新日期/Last Update: 1900-01-01