航天推进技术研究院主办
[1]丁兆波.一种大面积比喷管的分段式设计与数值分析[J].火箭推进,2013,39(01):19-23.
DING Zhao-bo.Design and numerical analysis of segmental nozzle with high area ratio[J].Journal of Rocket Propulsion,2013,39(01):19-23.
点击复制
DING Zhao-bo.Design and numerical analysis of segmental nozzle with high area ratio[J].Journal of Rocket Propulsion,2013,39(01):19-23.
一种大面积比喷管的分段式设计与数值分析
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
39
期数:
2013年01期
页码:
19-23
栏目:
研究与设计
出版日期:
2013-02-28
- Title:
- Design and numerical analysis of segmental nozzle with high area ratio
- Keywords:
- high area ratio; segmental; single-wall nozzle; secondary flow; cool
- 分类号:
- V434-34
- 文献标志码:
- A
- 摘要:
- 为了满足大推力上面级发动机大面积比喷管的设计需求，采用了排放冷却前段和单壁辐射冷却尾段的分段式设计方案。在排放冷却前段传热计算的基础上，通过对内流场进行数值模拟，重点研究了单壁尾段在引入上游排放冷却气氢情况下的冷却特性和喷管效率。结果表明：对于大面积比喷管，采用带二次流的单壁金属喷管延伸段是现实可行的，有望达到较好的冷却保护效果并提高喷管效率。
- Abstract:
- To meet the needs of the nozzle with high area ratio for large thrust upper-stage engine, a segmental design scheme for the nozzle is adopted, whose forepart is cooled by dump-cooling mode and end-piece by single-wall radiation cooling mode. Based on the heat transfer calculation of the dump-cooled forepart, the cooling characteristics and efficiency of single-wall end-piece with se- condary flow was mainly studied. Numerical simulation of flow field shows that the high area ratio nozzle is feasible for single-wall metal nozzle extension (NE) with secondary flow. It is hopeful to protect the nozzle wall, and improve the nozzle efficiency. The interaction between secondary flow and main stream is analyzed.
参考文献/References:
[1]WINTERFELDT L, LAUMERT B, TANO R. Redesign of the Vulcain 2 nozzle extension, AIAA2005-4536[R]. US- A: AIAA, 2005.
[2]BIGERT M, STENHOLM T. Technology for the film-cooled nozzle of the Vulcain 2 engine, IAF-98-S.3.05[R]. [S.l.]: IAF, 1995.
[3]GROSDEMANGE H, HAGGANDER J. Advanced nozzle extension demonstration for Vulcain Mark II application, AIAA95-2537[R]. USA: AIAA, 1995.
[4]HAGGANDER J, STENHOLM T. Design and manufactu- ring of advanced nozzle demonstrator for Vulcain Mk II, AIAA95-2538[R]. USA: AIAA, 1995.
[5]FUKUSHIMA Y, NAKATSUZI H. Development status of LE-7A and LE-5B engines for H-IIA family, IAF97-S.1.02[R]. [S.l.]: IAF, 1997.
[6]BYRD Thomas. The J-2X upper stage engine: from design to hardware, AIAA 2010-6968[R]. USA: AIAA, 2010.
[7]LJUNGKRONA L, KLINGMANN B M. Cooling perfor- mance of the nozzle extension of the Ariane 5 core stage engine Vulcain, AIAA 98-35702[R]. USA: AIAA, 1998.
[8]额日其太, 王强. 喷管超音段壁面排气引射冷却方案气动特性研究[J]. 航空动力学报, 2001, 16(4): 376-380.
[9]王强, 付晓明, 额日其太. 流体注入的轴对称矢量喷管三维流场计算[J]. 推进技术, 2002, 23(6): 441-444.
[10]TUCKER P K. Combustion devices technology team: an overview and status of STME-related activities, AIAA92-3224[R]. USA: AIAA, 1992.
[11]CAPORICCI M, ERIKSSON L-E, ONOFRI M. Advanced nozzle technologies for the Ariane 5 Vulcain engine, AIAA 94-3263[R]. USA: AIAA, 1994.
[12]刘爱华, 王占学. 二次流喷射对喷管流场性能的影响 [J]. 推进技术, 2007, 28(2): 144-147.
[13]李志杰, 王占学, 蔡元虎. 二次流喷射位置对流体推力矢量喷管气动性能影响的数值模拟[J]. 航空动力学报, 2008, 23(9): 144-147.
[14]GAMBLE E, HAID D. Improving off-design nozzle per- formance using fluidic injection, AIAA2004-1206[R]. USA: AIAA.
[15]CAPONE F J, RE Richard J, BARE E A. Parametric in- vestigation of single-expansion-ramp nozzles at Mach numbers from 0.60 to 1.20, NASA-TP-3240[R]. USA: NASA, 1992.
备注/Memo
收稿日期：2012-07-02；修回日期：2012-12-24 基金项目：国家863高科技基金(2007AA702) 作者简介：丁兆波（1980—），男，工程师，在读博士生，研究领域为液体火箭发动机燃烧装置的设计和研究
更新日期/Last Update:
1900-01-01