航天推进技术研究院主办
DOU Wei,HU Chang-xi.Simulation and testing research for water hammer characteristic of liquid rocket engine[J].Journal of Rocket Propulsion,2013,39(02):40-45.
液体火箭发动机水击特性仿真及试验研究
- Title:
- Simulation and testing research for water hammer characteristic of liquid rocket engine
- 文章编号:
- 1672-9374(2013)02-0040-06
- 分类号:
- V434-34
- 文献标志码:
- A
- 摘要:
- 建立了液体火箭发动机水击压力的模型,进行了数值仿真和试验对比分析,研究了影响液体火箭发动机水击压力的影响因素,讨论了发动机关机后推进剂管路的压力瞬变特性,从而验证了数值模拟的正确性。
- Abstract:
- Water hammer pressure model of liquid rocket engine was built. The numerical simulation and testing contrastive analysis were made. The factors that influence water hammer pressure of the liquid rocket engine were investigated. The pressure transient characteristic of the propellant pipes after shutdown of engine was discussed. The correctness of the numerical simulation was approved by the comparison of calculated data with experiment data. The research achievement can be used in the design and testing of liquid rocket engine.
参考文献/References:
[1]胡平信, 刘国球. 液体火箭发动机的技术发展和展望[J].导弹与航天运载技术, 1998, 27(2): 1-10.
[2]PRICKETT R P, MAYER E, HERMEL J. Water hammer in a spacecraft propellant feed system[J]. Journal of Pro- pulsion and Power, 1992, 8(3): 592-597.
[3]PRICKEET R P, MAYER E, HERMEL J. Water hammer in a spacecraft propellant feed system, AIAA-88-2920[R]. USA: AIAA, 1998.
[4]黎勤武, 张为华, 王振国, 等. 空间发动机系统关机过程水击现象理论分析[J]. 推进技术, 1998, 19(3):27-29.
[5]苏龙斐, 张黎辉, 潘海林.卫星推进系统发动机启动过程数值仿真[J]. 航空动力学报, 2005, 20(4):698-701.
[6]林景松, 王平阳, 高红. 液体火箭发动机关机水击的数值模拟[J]. 上海航天, 2008 (3): 53-58.
[7]聂万胜, 陈新华, 戴德海, 等. 姿控推进系统发动机关机的管路瞬变特性[J]. 推进技术, 2003, 24(1): 6-8.
[8]张黎辉, 李家文, 张雪梅, 等. 航天器推进系统发动机动态特性研究[J]. 航空动力学报, 2004, 19(4): 543-549.
[9]刘国球. 液体火箭发动机原理[M]. 北京: 中国宇航出版社, 1993.
相似文献/References:
[1]郑 伟,李护林,陈新红.激光快速成形技术在液体动力领域的应用前景[J].火箭推进,2015,41(06):1.
ZHENG Wei,LI Hulin,CHEN Xinhong.Application prospect of laser rapid prototyping
technology in the field of liquid power[J].Journal of Rocket Propulsion,2015,41(02):1.
[2]郭 敬,宋晶晶,孔凡超.发动机推进剂增压输送系统建模仿真技术综述[J].火箭推进,2015,41(05):1.
GUO Jing,SONG Jingjing,KONG Fanchao.Overview of modeling and simulation technology
for propellant pressurization feed system
of liquid rocket engine[J].Journal of Rocket Propulsion,2015,41(02):1.
[3]于 康,谢荣华,陈晓江.表面张力贮箱电子束焊接工艺研究[J].火箭推进,2015,41(05):89.
YU Kang,XIE Ronghua,CHEN Xiaojiang.Study on electron beam welding process
for surface tension tank[J].Journal of Rocket Propulsion,2015,41(02):89.
[4]刘中华,苏 晨,汪军安,等.气路膜片设计研究[J].火箭推进,2015,41(05):95.
LIU Zhonghua,SU Chen,WANG Junan,et al.Design and study of pneumatic diaphragm in gas circuit[J].Journal of Rocket Propulsion,2015,41(02):95.
[5]薛 薇,蔡震宇,曹红娟,等.基于可视化平台的液氢/液氧火箭发动机核心部件质量计算[J].火箭推进,2015,41(04):61.
XUE wei,CAI Zhenyu,CAO Hongjuan,et al.Mass calculation of key assembly units in
LH2/ LOX rocket engine based on visual interface[J].Journal of Rocket Propulsion,2015,41(02):61.
[6]穆朋刚,童 飞,蒲光荣,等.温度对贮箱增压系统的影响分析[J].火箭推进,2015,41(04):74.
MU Penggang,TONG Fei,PU Guangrong,et al.Influence of temperature on tank pressurization system[J].Journal of Rocket Propulsion,2015,41(02):74.
[7]高朝辉,刘 宇,肖 肖,等.垂直着陆重复使用运载火箭对动力技术的挑战[J].火箭推进,2015,41(03):1.
GAO Zhao-hui,LIU Yu,et al.Challenge to propulsion technology for vertical
landing reusable launch vehicle[J].Journal of Rocket Propulsion,2015,41(02):1.
[8]申智帅,等.气动增压器技术及其在空间推进系统的应用[J].火箭推进,2015,41(03):15.
SHEN Zhi-shuai,RUAN Hai-jun,et al.Pneumopump technology and its application
in space propulsion system[J].Journal of Rocket Propulsion,2015,41(02):15.
[9]张 翔,徐洪平,安雪岩,等.液体火箭发动机稳态运行故障
数据聚类分析研究0[J].火箭推进,2015,41(02):118.
ZHANG Xiang,XU Hong-ping,AN Xue-yan,et al.Clustering analysis for fault data in steady process of
liquid propellant rocket engine[J].Journal of Rocket Propulsion,2015,41(02):118.
[10]窦 唯,闫宇龙,金志磊,等.某发动机涡轮泵转子高温超速/疲劳试验研究[J].火箭推进,2015,41(01):15.
DOU Wei,YAN Yu-long,JIN Zhi-lei,et al.Fatigue experiment of turbo-pump rotor at
over-speed and high temperature condition[J].Journal of Rocket Propulsion,2015,41(02):15.
备注/Memo
收稿日期:2012-10-23;修回日期:2012-12-24
基金项目:国家863项目(2008AA702303)
作者简介:窦唯(1977—),男,高级工程师,研究领域为液体火箭发动机总体设计