航天推进技术研究院主办
TIAN Yuan,LI Dan-lin,SUN Ji-guo,et al.Instability analysis on high-frequency injection-coupled combustion of shear coaxial injector[J].Journal of Rocket Propulsion,2014,40(03):23-28.
同轴剪切喷嘴高频喷注耦合燃烧不稳定分析
- Title:
- Instability analysis on high-frequency injection-coupled combustion of shear coaxial injector
- 分类号:
- V434-34
- 文献标志码:
- A
- 摘要:
- 同轴剪切喷嘴在大推力氢氧发动机及液氧甲烷发动机上得到了广泛的应用,研究表明,当同轴剪切式喷嘴的中心氧喷嘴喷注过程与燃烧室的声学振荡发生耦合时,容易发生高频喷注耦合燃烧不稳定。高频喷注耦合燃烧不稳定一般无法通过隔板、声腔等传统燃烧稳定装置解决,需要在设计喷注器时采取相应措施。通过求解喷嘴导纳得到了喷嘴的固有声学频率,并与冷态声学试验结果和缩比喷注器热试结果进行了对比,表明吻合较好。研究了氧喷嘴长度、氧喷孔环直径、氧喷前温度和氧喷前压力等因素对氧喷嘴声学频率的影响,结果表明:增大氧喷孔环直径、提高氧喷前压力以及减小氧喷嘴长度、降低氧喷前温度可以提高氧喷嘴声学频率。
- Abstract:
- Shear coaxial injector is widely used in high thrust hydrogen/oxygen and LOX/LCH4 engines. According to investigation, the high-frequency injection-coupled combustion instability is easy to happen when the injection process of the central oxygen injector is coupled with acoustic oscillation in chamber. This instability can not be eliminated with baffle or acoustic cavity, but can be avoided by clever design of injector. Inherent acoustic frequency of oxygen injector was obtained by computing admittance of injector, and compared to the results of cold state acoustic experiment and subscale injector hot-fire test. Their consistency is quite good. The effects of oxygen injector length, oxygen injector orifice diameter, oxygen temperature, oxygen pressure on acoustic frequency of oxygen injector are investigated on this basis. The results indicate that the acoustic frequency of the oxygen injector can be improved if the oxygen injector orifice diameter is enlarged, the oxygen pressure is increased, the oxygen injector length is decreased or the oxygen temperature is lowered. Some suggestions on injector design are given.
参考文献/References:
[1]杨 V, 安德松W E. 液体火箭发动机不稳定燃烧[M]. 张宝炯, 洪鑫, 陈杰, 译. 北京: 科学出版社, 2001.
[2]JENSEN R, DODSON H C, CLAFLIN S E. LOX/ hydrocarbon combustion instability investigation, NASA- CR-182249[R]. USA: NASA, 1989.
[3]KAWASHIMA H, KOBAYASHI K, TOMITA T, et al. A combustion instability phenomenon on a LOX/methane subscale combustor, AIAA 2010-7802[R]. USA: AIAA, 2010.
[4]NUNOME Y, ONODERA T. Combustion instability phenomena observed during cryogenic hydrogen injec- tion temperature ramping tests for single coaxial injector elements, AIAA 2011-6027[R]. USA: AIAA, 2011.
[5]BREISACHER K J, PRIEM R J. Analysis of 5 kHz combustion instabilities in 40 K methane/LOX combus- tion chambers, NASA Technical Memorandum 101368[R]. USA: NASA, 1988.
[6]BREISACHER K J. Axisymmetric single shear element combustion instability experiment, AIAA 93-1953[R]. USA: AIAA, 1993.
[7]AITHAL S M, LIU Z N, JENSEN R J, et al. Nonlinear injection transfer function simulations for liquid propellants, AIAA 2008-4742[R]. USA: AIAA, 2008.
[8]KAWASHIMA H, KUMAKAWA A, ONODERA T, et al. Combustion and regenerative cooling characteristics of LOX/methane engine, AIAA 2008-4837[R]. USA: AIAA, 2008.
[9]NUNOME Y, TAKAHASHI M, KUMAKAWA A, et al. High-frequency flame oscillation observed at a coaxial LOX/LH2 injector element, AIAA 2008-4848[R]. USA: AIAA, 2008.
[10]TSOHAS J, HEISTER S D. CFD simulations of liquid rocket coaxial injector hydrodynamics, AIAA 2009- 5387[R]. USA: AIAA, 2009.
[11]SWEENEY B A, LINEBERRY D M, FREDERICK R A, Jr. Scaling a single element atmospheric combustor. AIAA 2010-6893[R]. USA: AIAA, 2010.
[12]KOBAYASHI K, YU D, IIZUKA N, et al. Studies on combustion instability for liquid propellant rocket engines, AIAA 2011-6028[R]. USA: AIAA, 2011.
相似文献/References:
[1]郭灿琳,卢 钢,陈建华,等.喷嘴式隔板与纵向肋式隔板阻尼效应分析[J].火箭推进,2013,39(03):32.
GUO Can-lin,LU Gang,CHEN Jian-hua,et al.Analysis on damping effect of vibration baffles with protruded injectors and longitudinal ribs[J].Journal of Rocket Propulsion,2013,39(03):32.
[2]韩超,夏智勋,胡建新.水冲压发动机燃烧稳定性数值研究[J].火箭推进,2008,34(06):27.
Han Chao,Xia Zhixun,Hu Jianxin.Numerical study on combustion stability for water ramj et[J].Journal of Rocket Propulsion,2008,34(03):27.
备注/Memo
收稿日期:2014-01-12;修回日期:2014-04-16 基金项目:国防基础科研计划项目(B0320110012) 作者简介:田原(1979—),男,高级工程师,研究领域为液体火箭发动机燃烧装置设计