航天推进技术研究院主办
ZHAO Hua,CHANG Ying.Design of stepper motor torque loading system for LOX/kerosene engine[J].Journal of Rocket Propulsion,2017,43(02):59-65.
液氧/煤油发动机用步进电机力矩加载系统设计
- Title:
- Design of stepper motor torque loading system for LOX/kerosene engine
- 分类号:
- V434-34
- 摘要:
- 介绍了液氧/煤油发动机用步进电机力矩加载系统的设计,描述了以磁粉制动器为加载核心的电机力矩加载系统的结构和硬件、软件设计方案,重点描述了力矩加载系统的模糊PI控制算法,将PI控制参数进行了模糊化和解模糊处理,制定了模糊推理规则,实现了力矩加载系统PI控制参数的动态调整,提高了步进电机力矩加载系统的加载精度.实际应用证明:研发的电机力矩加载系统实现了对液氧/煤油发动机用电机的模拟加载和电机参数的测量,满足了电机的测试要求.
- Abstract:
- The design of the torque loading system of stepper motor for liquid oxygen and kerosene engine is introduced in this paper.The structure,hardware and software design of the motor torque loading system taking magnetic powder brake as the loading core are described.The fuzzy PI control algorithm of the torque loading system is elaborated.The fuzzification and de-blurred processing of the PI control parameters are performed.The fuzzy inference rule is drawn up.The dynamical adjustment of PI control parameters for the torque loading system was achieved.The loading accuracy of the stepping motor torque loading system was improved.The practical application proves that the developed motor torque loading system can realize the simulation loading and parameter measurement of the motor used in LOX/kerosene engine and meet the testing requirements of the motor.
参考文献/References:
[1]刘军. 液氧煤油发动机用电机测量控制系统研究设计[D]. 西安: 西北工业大学, 2005.
[2]白连平, 杨婷, 孙佃升. 电机实验中稳恒负载的实现[J]. 实验技术与管理, 2016, (8): 23-25.
[3]张洪帅, 王平, 韩邦成. 基于模糊 PI 模型参考自适应的高速永磁同步电机转子位置检测[J]. 中国电机工程学报, 2014, 34(12): 1879-1894.
[4]章为国, 杨向忠. 模糊控制理论与应用[M]. 西安: 西北工业大学出版社, 2000.
[5]陈作杰, 吴培德, 张义红. 模糊PI控制器在薄膜张力控制系统的应用研究[J]. 智能计算机与应用, 2014, (6): 42-44.
[6]周晖. 基于模糊PI控制的永磁同步电机矢量控制系统实现及性能研究[D]. 杭州: 浙江大学, 2006.
[7]邹乾. 两相混合式步进电机的模糊PI控制方法研究[D].杭州: 浙江大学, 2010.
[8]李刚, 韩海兰, 赵德阳. 四轮轮毂电机电动汽车横摆力矩模糊PI控制研究[J]. 机械设计与制造, 2015, (7): 103-107.
[9]鲁文其, 周延锁, 刘虎. 动态载荷模拟可控加载与测试装置设计[J]. 机电工程, 2015(2): 185-189.
相似文献/References:
[1]黄其殷,王幸果,刘 上,等.液氧/煤油发动机起动箱仿真与试验研究[J].火箭推进,2015,41(03):21.
HUANG Qi-yin,WANG Xing-guo,LIU Shang,et al.Simulation and test study on starting box of
LOX/kerosene rocket engine[J].Journal of Rocket Propulsion,2015,41(02):21.
[2]李 程,刘站国,徐浩海.双推力室起动同步性研究[J].火箭推进,2014,40(04):16.
LI Cheng,LIU Zhan-guo,XU Hao-hai.Study on synchronous ignition of dual-thrust chamber engine[J].Journal of Rocket Propulsion,2014,40(02):16.
[3]李建军,薛宁.液氧平均流量测量研究[J].火箭推进,2010,36(01):67.
Jianjun,Xue Ning.Research on measurement of LOX mean flow rate[J].Journal of Rocket Propulsion,2010,36(02):67.
[4]来代初,苏红军,李伟.液氧/煤油发动机煤油高低温试验工艺技术[J].火箭推进,2009,35(04):53.
Lai Daichu,Su Hongjun,Li Wei.High and low temperature test technology of
kerosene of the LOX/kerosene engine[J].Journal of Rocket Propulsion,2009,35(02):53.
[5]李向阳,王晓锋,宣统,等.液氧/煤油发动机煤油预压涡轮泵技术[J].火箭推进,2009,35(01):16.
Li Xiangyang,Wang Xiaofeng,Xuan Tong,et al.Techniques of kerosene booster turbopump for
LOX/kerosene staged combustion cycle engine[J].Journal of Rocket Propulsion,2009,35(02):16.
[6]唐斌运.液氧/煤油发动机试验废水的循环使用[J].火箭推进,2007,33(03):60.
Tang Binyun.Waste water reclamation for LOX/kerosene engine test[J].Journal of Rocket Propulsion,2007,33(02):60.
[7]王志武.基于虚拟仪器技术的信号处理与故障检测系统[J].火箭推进,2007,33(04):52.
Wang Zhiwu.Data analyzing and faults detecting system based on virtual instruments technology[J].Journal of Rocket Propulsion,2007,33(02):52.
[8]李伟民.液氧/煤油发动机试验起动过程推进剂供应技术[J].火箭推进,2006,32(03):56.
Li Weimin.Technology of propellant supply in starting of LOX/kerosene engine testing[J].Journal of Rocket Propulsion,2006,32(02):56.
[9]程磊.液氧/煤油发动机换热器试车台配气系统设计[J].火箭推进,2006,32(05):60.
Cheng Lei.Design of air rationing system of heat exchanger test bench for LOX/kerosene rocket engine[J].Journal of Rocket Propulsion,2006,32(02):60.
[10]李伟民.液氧/煤油发动机试验系统[J].火箭推进,2005,31(06):50.
Li Weimin.LOX/kerosene rocket engine test system[J].Journal of Rocket Propulsion,2005,31(02):50.
备注/Memo
收稿日期:2016-10-08;修回日期:2016-11-02 作者简介:赵华(1987—),男,硕士,工程师,研究领域为液体火箭发动机计量测试技术