PDF下载 分享
[1]左 蔚,宋梦华,杨欢庆,等.增材制造技术在液体火箭发动机应用述评[J].火箭推进,2018,44(02):55-65.
　ZUO Wei,SONG Menghua,YANG Huanqing,et al.Application of additive manufacturing technology in liquid rocket engine[J].Journal of Rocket Propulsion,2018,44(02):55-65.
点击复制

增材制造技术在液体火箭发动机应用述评

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 44 期数: 2018年02期 页码: 55-65 栏目: 专论与综述 出版日期: 2018-04-30
Title:
Application of additive manufacturing technology in liquid rocket engine
文章编号:
1672-9374(2018)02-0055-11
作者:
左 蔚1; 2; 宋梦华1; 2; 杨欢庆1; 2; 陈新红1; 2
1.西安航天发动机有限公司,陕西 西安 710100; 2.国防科技工业航天特种构件增材制造技术创新中心,陕西 西安 710100
Author(s):
ZUO Wei;  SONG Menghua;  YANG Huanqing;  CHEN Xinhong
1. Xi'an Space Engine Company Limited, Xi'an 710100, China; 2.NDSTI Innovation Center of Aerospace Non-traditional Component Additive Manufacturing, Xi'an 710100, China
关键词:
增材制造;  液体火箭发动机;  应用分析
Keywords:
additive manufacturing;  liquid rocket engine;  application analysis
分类号:
V463-34
文献标志码:
A
摘要:
美国普惠洛克达因公司、NASA、太空探索技术公司(SpaceX)、蓝色起源公司、Rocket Lab公司、空客防务与航天公司及西安航天发动机有限公司等国内外航天企业和科研机构将增材制造技术广泛应用于液体火箭发动机,对其产品、成形工艺、技术路线及发展趋势做了较详尽的介绍。分析了国外增材制造液体火箭发动机关键零部件工程应用和发展思路对我国的启示,并提出了展望。
Abstract:
The product, forming process, technical route and development tendency of additive manufacturing technology in liquid rocket engines in Rocketdyne, NASA, SpaceX, Blue Origin, Rocket Lab, Airbus Space and Defence Company, Xi'an Space Engine Company are introduced. Inspiration from engineering application and development ideas of additive manufacturing technology in key components and parts in liquid rocket engines abroad is analyzed. On this basis, the prospect of liquid rocket engine in China is proposed.

参考文献/References:

[1] 李晓红.先进制造技术助力“太空发射系统”研制[J]国防制造技术,2013(4):5-7
[2] HAYNES J. Additive manufacturing development methodology for liquid rocket engines [C]// Proceedings of Quality in the Space and Defense Industry Forum. Cape Canaveral, USA: [s.n.], 2017: 111-121.
[3] BUTLER A. Aerojet rockedyne embracing 3D printing for AR1 [J]. Aerospace daily&defense report, 2015, 252(5): 4.
[4] SCHMULAND D, CARPENTER C B. New insight into additive manufacturing processes [C]// Proceedings of Small Satellite Conference on Enabling Low-Cost, High-Impulse Propulsion Systems. logan Utah: [s.n.], 2013: 12-18.
[5] DANIEL J, LEVACK H,WILLIAM F. Family of aerojet rocketdyne commercial rocket engines:AIAA 2013-545[R].USA: AIAA,2013.
[6] THOMAS D. Center overview and additive manufacturing at MSFC [R]. USA: AIAA Technical Committee on Management, 2014.
[7] WERKHEISER N. Overview of NASA initiatives in 3D printing and additive manufacturing [R]. Birminghan: 2014 DOD Maitenance Symposium, 2014.
[8] PROTZ C, BOWMAN R. Additive Manufacturing of Low Cost Upper Stage Propulsion components[EB/OL]. [2011-04-07]. hppt://www.ntrs.nasa.gov/sear...j.
[9] PAUL R G, SANDY E G. Development and hot-fire testing of additively manufactured copper combustion chambers for liquid rocket engine applications:AIAA 2017-4670[R].USA: AIAA,2017.
[10] MCMAHAN T. NASA tests 3D printed rocket fuel pump and paves way for 3D-printed demonstrator engine [J]. Designfax,2015, 11(34): 12.
[11] HONOR E M. Structural strengthening of rocket nozzle extension by means of laser metal deposition [J]. Proceedings of SPIE, 2012, 8239: 823905-1.
[12]TOMAS D, LISE B,MICHAEL H.Demonstration of a laser welded channel wall nozzle-vulcain 2 Scale:AIAA 2006-4369[R].USA: AIAA,2006.
[13] SOLLER S. Selective laser melting(SLM)of Inconel 718 and stainless steel injectors for liquid rocket engines [C]// 6th European Conference for Aerospace Sciences.[S.l.]:[s.n.], 2015: 11-18.
[14] SOLLER S, BEYER S, DAHLHAUS A. Development of liquid rocket engine injectors using additive manufacturing [C]// 6th European Conference For Aerospace Sciences. [S.l.]:[s.n.], 2015: 130-139.
[15]SOLLER S, BEHR R, BEYER S, et al. Design and testing of liquid propellant injectors for additive manufacturing [C]// 7th European Conference For Aerospace Sciences. [S.l.]:[ s.n.],2017: 210-217.
[16] IANNETTI A,GIRARD N.ALOX/LCH4 reusable rocket engine[C]//7th European conference for aeronautics and space sciences. [S.1.]: [s.n.],2017:537-547.
[17] Space X. SpaceX completes qualification testing of superdraco thruster [EB/OL]. [2014-05-27]. http://www.spacex.com/press.
[18] 白静,杨欢庆.TC4钛合金喷注器壳体激光选区熔化成形技术研究[C]//2017年航天先进制造技术国际研讨会论文集.深圳:[s.n.],2017:223-233.
[19] 李护林,杨欢庆.激光选区熔化成形技术在航天领域的深化应用[C]//2017年航天先进制造技术国际研讨会论文集. 深圳:[s.n.],2017:137-148.
[20] 郑伟,李护林,陈新红.激光快速成形技术在液体动力领域的应用前景[J]火箭推进,2015,41(6):1-6.
ZHENG Wei, LI Hulin, CHEN Xinhong. Application prospect of laser rapid prototyping technology in the field of liquid power [J]. Journal of rocket propulsion, 2015,41(6):1-6.
[21]卢天健,何德坪,陈常青,赵长颖,方岱宁,王晓林. 超轻多孔金属材料的多功能特性及应用[J]力学进展.2006,36(4).517-535.
[22]左蔚,宋梦华,杨欢庆,等.激光选区熔化周期性三维点阵材料研究与工程应用[C]//中国宇航学会液体火箭推进专业委员会2017年学术年会论文集. 西安:[s.n.],2017:230-238.

相似文献/References:

[1]李元启,刘红军,徐浩海,等.液体火箭发动机动态特性仿真技术研究进展[J].火箭推进,2017,43(05):1.
　LI Yuanqi,LIU Hongjun,XU Haohai,et al.Research progress on numerical simulation technology of liquid rocket engine dynamic characteristics[J].Journal of Rocket Propulsion,2017,43(02):1.
[2]刘锋,申智帅,王波,等.气动增压空间推进系统及相关技术试验研究[J].火箭推进,2017,43(06):38.
　LIU Feng,SHEN Zhishuai,et al.Experimental study on pneumatic pressurization space propulsion system and its correlation technology[J].Journal of Rocket Propulsion,2017,43(02):38.
[3]王 丹,陈宏玉,周晨初.电动泵压式发动机系统方案与性能评估[J].火箭推进,2018,44(02):28.
　WANG Dan,CHEN Hongyu,ZHOU Chenchu.System scheme and performance evaluation of an engine fed by electric pump[J].Journal of Rocket Propulsion,2018,44(02):28.
[4]杜大华,穆朋刚,田川,等.液体火箭发动机管路断裂失效分析及动力优化[J].火箭推进,2018,44(03):16.
　DU Dahua,MU Penggang,et al.Failure analysis and dynamics optimization of pipeline for liquid rocket engine[J].Journal of Rocket Propulsion,2018,44(02):16.
[5]张蒙正,张 玫.航天运载器重复使用液体动力若干问题探讨[J].火箭推进,2019,45(04):9.
　ZHANG Mengzheng,ZHANG Mei.Discussion on some problems of reusable liquid-propellant engine[J].Journal of Rocket Propulsion,2019,45(02):9.
[6]蒲光荣,单 磊,赵晓慧,等.泵压式多次起动发动机起动过程仿真研究[J].火箭推进,2019,45(05):17.
　PU Guangrong,SHAN Lei,ZHAO Xiaohui,et al.Simulation study on start-up processes of a multi-startup turbopump-fed rocket engine[J].Journal of Rocket Propulsion,2019,45(02):17.
[7]石 璞,朱国强,李进贤,等.液体火箭发动机针栓喷注器雾化燃烧技术研究进展[J].火箭推进,2020,46(04):1.
　SHI Pu,ZHU Guoqiang,LI Jinxian,et al.Advances in atomized combustion technology research of pintle injector for liquid rocket engines[J].Journal of Rocket Propulsion,2020,46(02):1.
[8]杜大华,王 珺,王红建,等.液体火箭发动机涡轮盘低周疲劳寿命预测[J].火箭推进,2020,46(06):13.
　DU Dahua,WANG Jun,WANG Hongjian,et al.Low cycle fatigue life prediction of a liquid rocket engine turbine disk[J].Journal of Rocket Propulsion,2020,46(02):13.
[9]张忠利,周立新,胡锦华.多层隔热材料热防护方法[J].火箭推进,2023,49(02):51.
　ZHANG Zhongli,ZHOU Lixin,HU Jinhua.Thermal protection methods of multilayer heat insulation material[J].Journal of Rocket Propulsion,2023,49(02):51.
[10]林 源,熊莉芳,胡海峰.液体火箭发动机异构CAD三维模型装配技术分析与应用[J].火箭推进,2023,49(02):94.
　LIN Yuan,XIONG Lifang,HU Haifeng.Analysis and application of heterogeneous CAD 3D model assembly technology for liquid rocket engine[J].Journal of Rocket Propulsion,2023,49(02):94.

备注/Memo

收稿日期:2017-04-05
基金项目: 国防科工局技术基础科研项目(JSJC2013203B016)
作者简介: 左蔚(1991—),男,硕士,研究方向为液体火箭发动机工艺技术管理、激光增材制造技术

更新日期/Last Update: 1900-01-01