PDF下载 分享
[1]宋 凡,张祎玲,林嘉伟,等.空间发动机激光焊功率阈值研究[J].火箭推进,2018,44(04):40-46.
　SONG Fan,ZHANG Yiling,LIN Jiawei,et al.Study on power threshold of laser welding for space engine[J].Journal of Rocket Propulsion,2018,44(04):40-46.
点击复制

空间发动机激光焊功率阈值研究

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 44 期数: 2018年04期 页码: 40-46 栏目: 研究与设计 出版日期: 2018-08-31
Title:
Study on power threshold of laser welding for space engine
文章编号:
1672-9374(2018)04-0040-07
作者:
宋 凡;  张祎玲;  林嘉伟;  周宇浩
上海空间推进研究所, 上海 201112
Author(s):
SONG Fan;  ZHANG Yiling;  LIN Jiawei;  ZHOU Yuhao
Shanghai Institute of Space Propulsion, Shanghai 201112, China
关键词:
激光深熔焊;  匙孔;  功率阈值;  工艺参数;  激光束质量
Keywords:
laser penetration welding;  key hole;  power threshold;  technological parameter;  laser beam quality
分类号:
V463-34
文献标志码:
A
摘要:
对空间发动机模拟件进行了激光焊功率阈值研究,结果表明:焊接速度、离焦量、光束质量、保护气体等工艺因素均与阈值区间有关,阈值区间与焊接速度和离焦量成正向关系,光束质量对阈值区间的影响需要用焊接试验的实测值来确定,保护气体成分对YAG激光焊的阈值区间基本没有影响,但吹送方式和流量对阈值区间有明显作用。在空间发动机激光焊功率阈值的理论研究与工艺试验基础之上得到了最优激光焊工艺规范,采用该规范焊接的产品已通过了飞行试验考核,由此表明:空间发动机激光焊功率阈值研究的结果是正确、合理和有效的。
Abstract:
In this paper, the power threshold of laser welding is studied for the simulation parts of a space engine. The results show that the welding speed, defocusing amount, beam quality, protective gas are all related to the power threshold. The power threshold is positively related to the welding speed and the defocusing amount. The influence of laser beam quality on the power threshold needs to be determined by the measured values of welding test. The composition of the protective gas has no effect on the power threshold of YAG laser welding, but their waftage mode and flow rate have obvious effects on the power threshold. On the basis of the theoretical research and technological test on the power threshold of laser welding for space engine, the optimal process specification of laser welding is obtained. With this process specification, the welded products have passed the flight test, which indicates that the research result on the power threshold of laser welding for space engine is correct, reasonable and effective.

参考文献/References:

[1] 陈彦宾.现代激光焊接技术[M].北京:科学出版社,2005.
[2] 庞盛永.激光深熔焊接瞬态小孔和运动熔池行为及相关机理研究[D].武汉:华中科技大学,2011.
[3] 陈涛.脉冲激光焊接的数学模型[J].焊接学报,2001(2):9-14.
[4] 韩宁.激光深熔焊接阈值特性研究[D].北京:北京工业大学,2007.
[5] 陈虹.激光光束质量对光束传输聚焦和加工质量的影响[D].北京:北京工业大学,2006.
[6] 金湘中.激光深熔焊接小孔效应的理论和试验研究[D].长沙:湖南大学,2002.
[7] 程元勇.激光深熔焊接铝合金孔内等离子体的反韧致辐射吸收研究[D].长沙:湖南大学,2012.
[8] 李建强.304不锈钢激光焊接的建模与仿真[D].天津:天津大学,2004.
[9] 肖荣诗.CO2激光深熔焊接光致等离子体的行为研究[D].北京:北京工业大学,1997.
[10] 段爱琴.CO2激光深熔焊不稳定穿孔过程特征与相关机理研究[D].武汉:华中科技大学,2006.
[11] 田英超, 张祎玲,曹明. 1Cr18Ni9Ti脉冲激光焊接工艺研究[J].火箭推进,2014,40(3):73-76.
TIAN Yingchao, ZHANG Yiling,CAO Ming. Research on pulsed laser welding technology of 1Cr18Ni9Ti[J].Journal of rocket propulsion,2014,40(3):73-76.

备注/Memo

收稿日期:2017-06-12
作者简介: 宋 凡(1989—),男,工程师,研究领域为空间推进系统激光焊接工艺

更新日期/Last Update: 1900-01-01