PDF下载 分享
[1]唐 亮,李 平,周立新.液体火箭发动机液膜冷却研究综述[J].火箭推进,2020,46(01):1-12.
　TANG Liang,LI Ping,ZHOU Lixin.Review on liquid film cooling of liquid rocket engine[J].Journal of Rocket Propulsion,2020,46(01):1-12.
点击复制

液体火箭发动机液膜冷却研究综述

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 46 期数: 2020年01期 页码: 1-12 栏目: 专论与综述 出版日期: 2020-02-29
Title:
Review on liquid film cooling of liquid rocket engine
作者:
唐 亮; 李 平; 周立新
(西安航天动力研究所 液体火箭发动机技术重点实验室,陕西 西安 710100)
Author(s):
TANG Liang;  LI Ping;  ZHOU Lixin
(Science and Technology on Liquid Rocket Engine Laboratory, Xi’an Aerospace Propulsion Institute, Xi’an 710100, China)
关键词:
液体火箭发动机;  液膜冷却;  液膜夹带;  传热
Keywords:
liquid rocket engine;  liquid film cooling;  liquid film entrainment;  heat transfer
分类号:
V434.14文献标识码:A 文章编号:1672-9374(2020)01-0001-12
摘要:
液膜冷却是液体火箭发动机的一种重要的冷却方式,具有冷却结构简单、冷却能力强等优点,一般与其他冷却方式结合,实现对发动机的冷却。液膜冷却对发动机的热防护可靠性和发动机比冲均有重要的影响。通过追踪国内外液膜冷却研究现状,从液膜的形成、中心气流对液膜的夹带作用、液膜冷却分析模型以及液膜冷却对发动机性能的影响等方面,梳理了液膜冷却的研究文献,总结了当前研究中存在的不足,并从冷却剂注入结构、中心气流对液膜夹带特性、液体火箭发动机液膜冷却计算方法和推力室冷却结构/技术方案等方面提出研究展望。
Abstract:
Liquid film cooling is an important cooling method for liquid rocket engine.It has the advantages of simple cooling structure and strong cooling capacity.It is generally combined with other cooling methods to achieve the engine cooling.Liquid film cooling has a significant impact on the thermal protection reliability and specific impulse of the liquid rocket engine.In this paper, the research literature on liquid film cooling is reviewed from the aspects of liquid film formation, liquid entrainment, liquid film cooling analysis model and the effect on engine performance.The shortcomings in the current researches are summarized, and the research prospects are proposed from the aspects of the coolant injection structure, the entrainment characteristics of liquid film by the central airflow, the calculation method of liquid film cooling in liquid rocket engine, and the new structure/technical solution of thrust chamber.

参考文献/References:

[1] 蔡国飙,李家文,田爱梅,等.液体火箭发动机设计[M].北京:北京航空航天大学出版社,2011.
[2] 杨成虎, 林庆国, 刘昌国.高性能液体远地点发动机技术发展[J].火箭推进, 2013, 39(4):1-7.YANG C H, LIN Q G, LIU C G.Technology development of high-performance liquid apogee engine[J].Journal of Rocket Propulsion, 2013, 39(4):1-7.
[3] STECHMAN R C, OBERSTONE J.Design criteria for film cooling for small liquid-propellant rocket engines[C]// AIAA 4th Propulsion Joint Specialist Conference.Cleveland,Ohio:AIAA,1968.
[4] WELSH W E.Review of results of an early rocket engine film cooling investigation at the jet propulsion laboratory[R].TM-1961-32-58.
[5] KIRCHBERGER C, SCHLIEBEN G, HUPFER A, et al.Investigation on flm cooling in a kerosene/gox combustion chamber[R].AIAA 2009-5406.
[6] VOLKMANN J, MCLEOD J, CLAFLIN S.Investigation of throat film coolant for advanced LOX/RP-1 thrust Chambers[C]//27th Joint Propulsion Conference.Reston, Virigina:AIAA, 1991.
[7] KINNEY G R, ABRAMSON A, SLOOP J L.Internal film cooling experiments with air-stream temperature to 2000°F in 2- and 4-inch diameter horizontal tubes[R].NASA 1952-1087.
[8] KNAB O, PRECLIK D, ESTUBLIER D.Flow field prediction within liquid film cooled combustion Chambers of storable bi-propellant rocket engines[C]//34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit.Reston, Virigina:AIAA, 1998.
[9] YEN C Y, REUBEN Z S, WILLIAM E A.Liquid film cooling using swirl in rocket combustors[R].AIAA 2004-3360.
[10] HASSON D, PECK R E.Thickness distribution in a sheet formed by impinging jets[J].AIChE Journal, 1964, 10(5):752-754.
[11] INAMURA T, YANAOKA H, TOMODA T.Prediction of mean droplet size of sprays issued from wall impingement injector[J].AIAA Journal, 2004, 42(3):614-621.
[12] INAMURA T, AMAGASAKI S, YANAOKA H.Thickness of liquid film formed by impinging jets on a concave wall[J].Journal of Propulsion and Power, 2007, 23(3):612-617.
[13] 李平.低推力双组元液体火箭发动机液膜冷却参数的选择及传热分析[D].西安:航天科技集团第六研究院第11研究所,1995.
[14] 林庆国.空间轨控发动机高效燃烧室仿真与试验研究[D].长沙:国防科学技术大学, 2015.
[15] 符鹏飞, 侯凌云, 巴延涛, 等.小推力双组元火箭发动机中壁面液膜数值模拟[J].燃烧科学与技术, 2017, 23(4):299-304.
[16] 韩兆鹏, 张强, 张建伟, 等.基于Lagrange液膜方法的小推力液体火箭发动机耦合传热策略研究[J].推进技术, 2018, 39(9):2035-2042.
[17] COOK R T,QUENTMEYER R J.Advanced cooling techniques for high pressure hydrocarbon fueled rocket engines[R].AIAA-80-1266.
[18] SHINE S R, SUNIL KUMAR S, SURESH B N.Influence of coolant injector configuration on film cooling effectiveness for gaseous and liquid film coolants[J].Heat and Mass Transfer, 2012, 48(5):849-861.
[19] 加洪, г.г.液体火箭发动机结构设计[M].任汉芬, 颜子初,译.北京:宇航出版社, 1992.
[20] WARNER C F, GUINN G R.An experiment study of liquid film cooling accomplished by dual slotinjection[J].Journal of Spacecraft and Rockets, 1966, 3(10):1547-1549.
[21] 孙冰, 张建伟.火箭发动机热防护技术[M].北京:北京航空航天大学出版社, 2016.
[22] KNUTH E L.Mechanics of film cooling-part 1[J].Journal of Jet Propulsion, 1954, 24(6):359-365.
[23] GATER R, LECUYER M.A fundamental investigation of the phenomena that characterize liquid-film cooling[J].International Journal of Heat and Mass Transfer, 1970, 13(12):1925-1939.
[24] SAWANT P, ISHII M, MORI M.Prediction of amount of entrained droplets in vertical annular two-phase flow[J].International Journal of Heat and Fluid Flow, 2009, 30(4):715-728.
[25] SHINE S R, SUNIL KUMAR S, SURESH B N.Numerical study of wave disturbance in liquid cooling film[J].Propulsion and Power Research, 2013, 2(2):107-118.
[26] COY E B, SCHUMAKER S A, LIGHTFOOT M A.Film cooling of liquid hydrocarbon engines for operationally-responsive space access[C]// JANNAF 5th Liquid Propulsion Subcommittee Meeting.Colorado Springs, CO:JANNAF, 2010.
[27] MILLER R P, COY E B.Study in optimizing the film flow rate for liquid film cooling[R].AIAA 2011-5778.
[28] EBNER J, GERENDAS M, SCHAFER O, et al.Droplet entrainment from a shear-driven liquid wall film in inclined ducts:experimental study and correlation comparison[J].Journal of Engineering for Gas Turbines and Power, 2002, 124(4):874-880.
[29] ISHII M, MISHIMA K.Droplet entrainment correlation in annular two-phase flow[J].International Journal of Heat and Mass Transfer, 1989, 32(10):1835-1846.
[30] CIONCOLINI A, THOME J R.Prediction of the entrained liquid fraction in vertical annular gas-liquid two-phase flow[J].International Journal of Multiphase Flow, 2010, 36(4):293-302.
[31] LIU L, BAI B F.Generalization of droplet entrainment rate correlation for annular flow considering disturbance wave properties[J].Chemical Engineering Science, 2017, 164:279-291.
[32] STECHMAN R C.Film cooling of small rocket engines[R].MIR1968-264.
[33] BARTZ D R.A simple equation for rapid estimation of rocket nozzle convective heat transfer coefficients[J].ARS Journal, 1957.
[34] GRISSON W M.Liquid film cooling in rocket engines[R].AEDC-TR-91-1.
[35] CHURCHILL S W, USAGI R.A general expression for the correlation of rates of transfer and other phenomena[J].AIChE Journal, 1972, 18(6):1121-1128.
[36] PUROHIT G, DONATELLI P, ELLISON J, et al.Transient thermal model of a film-cooled bipropellant thruster[C]//38th Aerospace Sciences Meeting and Exhibit.Reno, NV, USA.Reston, Virigina:AIAA, 2000.
[37] 张锋, 仲伟聪.膜冷却推力室传热计算研究[J].火箭推进, 2009, 35(4):34-37.ZHANG F, ZHONG W C.Computational investigation of heat transfer for film cooling thrust chamber[J].Journal of Rocket Propulsion, 2009, 35(4):34-37.
[38] 杨薇,孙冰.液膜再生复合冷却中液膜传热特性[J].航空动力学报,2011,26(9):2016-2020.
[39] 张宏伟, 陶文铨, 何雅玲, 等.液体火箭发动机燃烧室液膜冷却数值研究[J].西安交通大学学报, 2006, 40(7):748-752.
[40] SHINE S R, SUNIL KUMAR S, SURESH B N.A newgeneralised model for liquid film cooling in rocket combustion chambers[J].International Journal of Heat and Mass Transfer, 2012, 55(19/20):5065-5075.
[41] 杨海洋,刘昌国,赵婷.液体火箭发动机液膜冷却分析模型[C]//首届中国空天推进技术论坛论文集.哈尔滨:[s.n.], 2017.
[42] WHALLEY P,HEWITT G F.The correlation of liquid entrainment fraction and entrainment rate in annular two-phase flow[M].[S.L.]:UKAEA Atomic Energy Research Establishment,1978.
[43] MORRELL G.Investigation of internal film cooling of a 1000-pound thrust liquid ammonia liquid oxygen rocket[R].NACA RME51E04, 1951.
[44] COULBERT C D.Selecting cooling techniques for liquid rockets for spacecraft[J].Journal of Spacecraft and Rockets, 1964, 1(2):129-139.
[45] ROSENBERG S D, SCHOENMAN L.High performance bipropellant engines for orbit transfer and attitude control propulsion[R].IAF-91-249.
[46] 李平, 王衍方.双组元姿控发动机液膜冷却对性能的影响分析[J].火箭推进, 1995, 21(5):1-8.LI P,WANG Y F.Analysis of the effect of liquid film cooling on the performance of the two-component attitude control engine[J].Journal of Rocket Propulsion, 1995, 21(5):1-8.
[47] SCHOENMAN L, HEIGHTS C.Two stage rocket combustor:US,4882904[P].1990-06-26.
[48] 周军, 王衍芳.液膜冷却和二次燃烧的双组元发动机的性能和温度特性[J].火箭推进, 1994, 20(1):5-15.ZHOU J, WANG Y F.Performance and temperature characteristics of a two-component engine with liquid film cooling and secondary combustion[J].Journal of Rocket Propulsion, 1994, 20(1):5-15.
[49] 银仁亮, 周进, 张中光.加扰流环双组元LAE的流场数值仿真[J].上海航天, 2004, 21(6):24-27.
[50] KREINER K, BRONSON D.Rocket engine with integeral combustion chamber step structure and its fabrication:US,6138450[P].2000-10-31.

相似文献/References:

[1]郑 伟,李护林,陈新红.激光快速成形技术在液体动力领域的应用前景[J].火箭推进,2015,41(06):1.
　ZHENG Wei,LI Hulin,CHEN Xinhong.Application prospect of laser rapid prototyping technology in the field of liquid power[J].Journal of Rocket Propulsion,2015,41(01):1.
[2]郭 敬,宋晶晶,孔凡超.发动机推进剂增压输送系统建模仿真技术综述[J].火箭推进,2015,41(05):1.
　GUO Jing,SONG Jingjing,KONG Fanchao.Overview of modeling and simulation technology for propellant pressurization feed system of liquid rocket engine[J].Journal of Rocket Propulsion,2015,41(01):1.
[3]于 康,谢荣华,陈晓江.表面张力贮箱电子束焊接工艺研究[J].火箭推进,2015,41(05):89.
　YU Kang,XIE Ronghua,CHEN Xiaojiang.Study on electron beam welding process for surface tension tank[J].Journal of Rocket Propulsion,2015,41(01):89.
[4]刘中华,苏 晨,汪军安,等.气路膜片设计研究[J].火箭推进,2015,41(05):95.
　LIU Zhonghua,SU Chen,WANG Junan,et al.Design and study of pneumatic diaphragm in gas circuit[J].Journal of Rocket Propulsion,2015,41(01):95.
[5]薛 薇,蔡震宇,曹红娟,等.基于可视化平台的液氢/液氧火箭发动机核心部件质量计算[J].火箭推进,2015,41(04):61.
　XUE wei,CAI Zhenyu,CAO Hongjuan,et al.Mass calculation of key assembly units in LH2/ LOX rocket engine based on visual interface[J].Journal of Rocket Propulsion,2015,41(01):61.
[6]穆朋刚,童 飞,蒲光荣,等.温度对贮箱增压系统的影响分析[J].火箭推进,2015,41(04):74.
　MU Penggang,TONG Fei,PU Guangrong,et al.Influence of temperature on tank pressurization system[J].Journal of Rocket Propulsion,2015,41(01):74.
[7]高朝辉,刘 宇,肖 肖,等.垂直着陆重复使用运载火箭对动力技术的挑战[J].火箭推进,2015,41(03):1.
　GAO Zhao-hui,LIU Yu,et al.Challenge to propulsion technology for vertical landing reusable launch vehicle[J].Journal of Rocket Propulsion,2015,41(01):1.
[8]申智帅,等.气动增压器技术及其在空间推进系统的应用[J].火箭推进,2015,41(03):15.
　SHEN Zhi-shuai,RUAN Hai-jun,et al.Pneumopump technology and its application in space propulsion system[J].Journal of Rocket Propulsion,2015,41(01):15.
[9]张 翔,徐洪平,安雪岩,等.液体火箭发动机稳态运行故障 数据聚类分析研究0[J].火箭推进,2015,41(02):118.
　ZHANG Xiang,XU Hong-ping,AN Xue-yan,et al.Clustering analysis for fault data in steady process of liquid propellant rocket engine[J].Journal of Rocket Propulsion,2015,41(01):118.
[10]窦 唯,闫宇龙,金志磊,等.某发动机涡轮泵转子高温超速/疲劳试验研究[J].火箭推进,2015,41(01):15.
　DOU Wei,YAN Yu-long,JIN Zhi-lei,et al.Fatigue experiment of turbo-pump rotor at over-speed and high temperature condition[J].Journal of Rocket Propulsion,2015,41(01):15.

备注/Memo

收稿日期:2019-02-27; 修回日期:2019-05-10基金项目:国家装备预研联合基金(6141B06240601)作者简介:唐亮(1991—),男,博士,研究领域为燃烧与传热

更新日期/Last Update: 2020-02-25