航天推进技术研究院主办
HUANG Jinping,WANG Jun,HUANG Daoqiong,et al.Experimental study on high-speed running of rolling bearing-rotor system of turbo-pump[J].Journal of Rocket Propulsion,2020,46(02):50-56.
涡轮泵滚动轴承-转子系统高速运行试验研究
- Title:
- Experimental study on high-speed running of rolling bearing-rotor system of turbo-pump
- 文章编号:
- 1672-9374(2020)02-0050-07
- Keywords:
- turbo pump; rotor; rolling bearing; rotor dynamic balancing; axial force
- 分类号:
- V433.9
- 文献标志码:
- A
- 摘要:
- 针对涡轮泵转子的具体结构特点,解决了高速运行试验过程中的支承、驱动、轴承润滑冷却、振动测量、转子高速动平衡及轴向力加载控制等问题。结合旋转机械故障诊断技术,提出了高速动平衡效率、转子支承状态及轴向力加载状态的优化方法,并在试验过程中对该优化方法进行了验证,实现了涡轮泵转子的高速稳定运行。结果表明:涡轮泵转子高速运行试验应采用刚性连接的柔性联轴器; 涡轮泵转子高速轴承需采用高压直喷式供油; 通过平衡效率优化可将非线性振动影响下的转子一次平衡效率由30%提高至73.7%; 为避免高速运行时产生基础松动,试验中滚动轴承外环应采用紧配合安装; 轴向力应沿轴承周向均匀加载,其大小应根据轴承-转子系统具体结构及运行状态综合分析确定。
- Abstract:
- According to the specific structural characteristics of turbo pump rotor, the problems of supporting, driving, bearing lubrication and cooling, vibration measurement, high speed rotor dynamic balance, axial force loading and control of rolling bearing rotor system during high-speed operation test were solved.Combined with the fault diagnosis technology of rotating machinery, the optimization methods of high speed dynamic balancing efficiency, rotor supporting state and axial force loading sate have been put forward, and the experimental verification has also been carried out.Finally, the high speed and stable operation of turbo pump rotor has been achieved.The results show that flexible coupling with rigid connection should be used when turbine pump rotor runs at high speed.High-speed bearing of the turbo-pump rotor requires high pressure and direct injection oil supply.By optimizing the balance efficiency, the primary balance efficiency of the rotor under the influence of nonlinear vibration can be increased from 30% to 73.7%.In order to avoid loosening of the foundation during high speed, the outer ring of rolling bearing should be installed with a tight fit during the test.The axial force should be uniformly loaded along the bearing circumference, and its magnitude should be determined according to the comprehensive analysis of the specific bearing rotor system structure and the running state.
参考文献/References:
[1] 休泽尔D K. 液体火箭发动机现代工程设计[M].朱宁昌,译.北京:中国宇航出版社, 2004.
[2] 吕运, 童大鹏, 田野, 等.滚动轴承-转子系统动力学建模与仿真分析[J].机械强度, 2015, 37(6):1178-1185.
[3] GUNDUZ A, DREYER J T, SINGH R.Effect of bearing preloads on the modal characteristics of a shaft-bearing assembly:Experiments on double row angular contact ball bearings[J].Mechanical Systems and Signal Processing, 2012, 31:176-195.
[4] 蒋云帆, 廖明夫.航空发动机高压转子前轴承刚度特性分析[J].推进技术, 2014, 35(8):1123-1130.
[5] 窦唯, 叶志明, 闫宇龙.液体火箭发动机氢涡轮泵转子动力学特性研究[J].导弹与航天运载技术, 2016(4):17-21.
[6] MUSZYNSKA A.Rotordynamics[M].New York:CRC Pr ess Taylor & Francis Group, 2005.
[7] 苗旭升, 李斌, 黄智勇.发动机涡轮泵流体动静压轴承应用分析[J].火箭推进, 2004, 30(6):1-4.MIAO X S, LI B, HUANG Z Y.Application analysis of liquid hybrid bearing for engine turbopump[J].Journal of Rocket Propulsion, 2004, 30(6):1-4.
[8] 毛凯, 苗旭升, 陈晖, 等.液体火箭发动机涡轮泵用轴承寿命试验研究[J].火箭推进, 2016, 42(5):24-27.MAO K, MIAO X S, CHEN H, et al.Experimental research on bearing life of turbopump in liquid rocket engine[J].Journal of Rocket Propulsion, 2016, 42(5):24-27.
[9] 刘红彬, 王海洋, 张磊, 等.高速滚动轴承喷油润滑油液穿透机理分析[J].航空动力学报, 2016, 31(7):1766-1776.
[10] PINEL S I, SIGNER H R, ZARETSKY E V.Comparison between oil-mist and oil-jet lubrication of high-speed, small-bore, angular-contact ball bearings[J].Tribology Transactions, 2001, 44(3):327-338.
[11] 李松生, 张钢, 陈晓阳, 等.超高速电主轴轴承的润滑条件分析[J].润滑与密封, 2005, 30(5):162-165.
[12] 郑龙席, 高晓果, 姜宏伟.小型航空发动机油雾润滑技术实验与数值研究[J].机械科学与技术, 2011, 30(7):1133-1136.
[13] 廖明夫.航空发动机转子动力学[M].西安:西北工业大学出版社, 2015.
[14] BENTLY D E, CHARLES T H.Fundamentals of Rotating Machinery Diagnostics[M].Minden, NV:Bently Pressurized Bearing Press, 2002.
[15] 马辉, 孙伟, 王学军, 等.转子系统松动故障特征分析[J].东北大学学报(自然科学版), 2009, 30(3):400-404.
[16] CHU F, TANG Y.Stability and non-linear responses of a rotor-bearing system with pedestal looseness[J].Journal of Sound and Vibration, 2001, 241(5):879-893.
[17] WU T, CHUNG Y, LIU C.Looseness diagnosis of rotating machinery via vibration analysis through Hilbert-Huang transform approach[J].Journal of Vibration and Acoustics, 2010, 132(3):1-9.
[18] 金路, 李爱民, 陈晖, 等.配合间隙对涡轮泵转子低速动平衡的影响研究[J].火箭推进, 2017, 43(4):14-17.JIN L, LI A M, CHEN H, et al.Effect of tolerance clearance on low-speed dynamic balance of turbopump rotor[J].Journal of Rocket Propulsion, 2017, 43(4):14-17.
相似文献/References:
[1]张晨曦,马晓丹.火箭发动机涡轮泵集成设计系统[J].火箭推进,2015,41(04):79.
ZHANG Chenxi,MA Xiaodan.Integration design system for turbo pump
in rocket engine[J].Journal of Rocket Propulsion,2015,41(02):79.
[2]李 彤,刘站国,窦 昱,等.涡轮泵水力试验系统扭矩现场校准技术研究[J].火箭推进,2015,41(03):73.
LI Tong,LIU Zhan-guo,DOU Yu,et al.Field calibration technology for torque of
turbo pump hydraulic test system[J].Journal of Rocket Propulsion,2015,41(02):73.
[3]窦 唯,刘占生.液体火箭发动机涡轮泵转子弯扭耦合振动研究[J].火箭推进,2012,38(04):17.
DOU Wei,LIU Zhan-sheng.Research on bend-twist coupling vibration of liquid rocket engine turbopump rotors[J].Journal of Rocket Propulsion,2012,38(02):17.
[4]唐 飞,李家文.诱导轮平面叶栅汽蚀不稳定现象的数值分析[J].火箭推进,2011,37(01):34.
TANG Fei,LI Jia-wen.Numerical analysis of instable cavitation phenomenon in 2D blade cascade of inducer[J].Journal of Rocket Propulsion,2011,37(02):34.
[5]白东安,段增斌,张翠儒.涡轮泵端面密封性能与漏气量影响研究[J].火箭推进,2010,36(01):38.
Bai Dong'an,Duan Zenbin,Zhang Cuiru.Effects of leaking rate on turbopump end-face sealing performance[J].Journal of Rocket Propulsion,2010,36(02):38.
[6]邓长华,周云端.涡轮泵环形颗粒阻尼器设计[J].火箭推进,2009,35(05):29.
Deng Changhua,Zhou Yunduan.Design of circular particle damper for turbopump[J].Journal of Rocket Propulsion,2009,35(02):29.
[7]白东安.涡轮泵超低工况性能研究[J].火箭推进,2008,34(03):13.
Bai Dong'an.Research on the turbo-pump performance under
ultra--low operation condition[J].Journal of Rocket Propulsion,2008,34(02):13.
[8]凌桂龙,张黎辉,唐家鹏,等.泵压式氢/氧液体火箭发动机质量分析[J].火箭推进,2007,33(01):1.
Ling Guilong Zhang Lihui Tang Jiapeng.Mass analysis of pump-pressurized hydrogen/oxygen liquid propellant rocket engine[J].Journal of Rocket Propulsion,2007,33(02):1.
[9]黄智勇,李昌奂,黄红,等.高工况涡轮泵轴系状态对工作可靠性的影响[J].火箭推进,2007,33(01):32.
Huang Zhiyong,Li Changhuan,Huang Hong.The effect of high operating condition turbopump shafting status on reliability[J].Journal of Rocket Propulsion,2007,33(02):32.
[10]徐悦,田爱梅.基于CFD的涡轮泵转子密封流体激振研究进展[J].火箭推进,2005,31(01):8.
Xu Yue,Tian Aimei.Progress of investigation on turbopump annular seal fluid-induced vibration based on CFD[J].Journal of Rocket Propulsion,2005,31(02):8.
备注/Memo
收稿日期:2019-08-27; 修回日期:2019-10-18基金项目:国家重大基础研究项目(613821)作者简介:黄金平(1977—),男,博士,高级工程师,研究领域为液体火箭发动机结构强度分析、转子动力学