航天推进技术研究院主办
[1]邵松林.某发动机整机模态分析[J].火箭推进,2012,38(04):55-59.
SHAO Song-lin.Modal analysis of a rocket engine[J].Journal of Rocket Propulsion,2012,38(04):55-59.
点击复制
SHAO Song-lin.Modal analysis of a rocket engine[J].Journal of Rocket Propulsion,2012,38(04):55-59.
某发动机整机模态分析
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
38
期数:
2012年04期
页码:
55-59
栏目:
研究与设计
出版日期:
2012-08-15
- Title:
- Modal analysis of a rocket engine
- 文章编号:
- 1672-9374(2012)04-0055-05
- Keywords:
- dynamic characteristic; finite element method; nozzle; modal test
- 分类号:
- V433.9-34
- 文献标志码:
- A
- 摘要:
- 为了获得某型号发动机的动态特性，采用有限元方法进行了发动机整机的模态分析。按照由组件到整机的思想，分别建立了各个组件的有限元模型。重点对推力室和喷管的建模方法进行了分析。将推力室按等效刚度法等效为单层壳，喷管按结构特性等效为正交各向异性壳，并将喷管计算结果同模态试验结果进行对比，验证了喷管建模方法的准确性。各组件模型组装为整机有限元模型，计算得到了整机的模态分布。数值计算结果同模态试验结果吻合较好。
- Abstract:
- To obtain the dynamic characteristics of a certain rocket engine, a modal analysis for the engine is conducted with finite element method (FEM). According to the idea from components to integrate, the finite element model for each component is established. In addition, the modeling methods for nozzle and thrust chamber are analyzed emphatically. The thrust chamber is simplified to single-layer shell by stiffness equivalent, while the nozzle is simplified to orthotropic shell in accordance with its structural properities. The calculated result of nozzle is compared with that of modal experiment to verify the precison of the modeling method for nozzle presented in this paper. The finite element model of whole engine is assemblied by all the component models, and then its modal distribution is calculated. The result of numerical calculation agrees well with that of modal test.
相似文献/References:
[1]梁俊龙,张贵田,秦艳平.基于高阶WENO格式的喷管动态特性仿真分析[J].火箭推进,2015,41(04):29.
LIANG Junlong,ZHANG Guitian,QIN Yanping.Simulated analysis on nozzle dynamic characteristics
based on high-order WENO scheme[J].Journal of Rocket Propulsion,2015,41(04):29.
[2]胡长喜.反向卸荷式减压阀动态建模与仿真[J].火箭推进,2014,40(01):60.
HU Chang-xi.Dynamic modeling and simulation for
converse unloading pressure reducing valve[J].Journal of Rocket Propulsion,2014,40(04):60.
[3]刘 上,刘红军,陈宏玉.液体离心喷嘴动力学特性理论分析[J].火箭推进,2012,38(03):1.
LIU Shang,LIU Hong-jun,CHEN Hong-yu.Theoretical analysis for dynamic characteristics of liquid swirl injector[J].Journal of Rocket Propulsion,2012,38(04):1.
[4]刘 华,雍雪君,梁俊龙,等.超声速进气道及冲压发动机动态特性分析[J].火箭推进,2012,38(03):17.
LIU Hua,YONG Xue-jun,LIANG Jun-long,et al.Analysis of supersonic air inlet and ramjet dynamic characteristics[J].Journal of Rocket Propulsion,2012,38(04):17.
[5]尤裕荣,袁洪滨,王春民,等.PWM高速开关阀动态调节特性仿真研究[J].火箭推进,2012,38(05):24.
YOU Yu-rong,YUAN Hong-bin,WANG Chun-min,et al.Simulation of dynamic regulating characteristics of PWM high-speed on-off valve[J].Journal of Rocket Propulsion,2012,38(04):24.
[6]潘 辉,张黎辉.AMESim软件在液体火箭发动机系统动态仿真上的应用[J].火箭推进,2011,37(03):6.
PAN Hui,ZHANG Li-hui.Application of AMESim in dynamic characteristic simulation of liquid rocket engine system[J].Journal of Rocket Propulsion,2011,37(04):6.
[7]尤裕荣,赵双龙,吴宝元,等.基于AMESim的冲压发动机燃油调节器动态特性仿真[J].火箭推进,2010,36(04):12.
You Yurong,Zhao Shuanglong,Wu Baoyuan,et al.A simulation on dynamic characteristics of ramjet fuel regulator based on AMESim[J].Journal of Rocket Propulsion,2010,36(04):12.
[8]杨明磊,张黎辉.液氧／煤油补燃循环发动机起动过程研究[J].火箭推进,2009,35(01):21.
Yang Mingleil,Zhang Lihui.Study on start-up of the staged combustion
LOX／kerosene rocket engine[J].Journal of Rocket Propulsion,2009,35(04):21.
[9]郑丽,李清廉,罗泽明,等.减压器开启过程内部流场的
动态仿真和特性研究[J].火箭推进,2009,35(01):36.
Zheng Li,Li Qinglian,Luo Zeming,et al.Simulation of transient flow field and dynamic
characterlstlcs o士pressure reducing valve during start-up[J].Journal of Rocket Propulsion,2009,35(04):36.
[10]尤裕荣,曾维亮.逆向卸荷式气体减压阀的动态特性仿真[J].火箭推进,2006,32(03):24.
You Yurong,Zeng Weiliang.Simulation on reverse balanced pneumatic pressure reducing valve dynamic characteristic[J].Journal of Rocket Propulsion,2006,32(04):24.
备注/Memo
收稿日期：2011-11-14；修回日期：2012-02-28
基金项目：国家“863”项目（2009AA7050409)
作者简介：邵松林（1986—），男，助理工程师，研究领域为火箭发动机结构动态特性分析
更新日期/Last Update:
1900-01-01