航天推进技术研究院主办
LIU Yan-jie,YANG Jun,WU Jian-jun,et al.Failure analysis and improvement on diffusion brazing of titanium alloy injector[J].Journal of Rocket Propulsion,2012,38(04):60-67.
钛合金喷注器扩散钎焊失效分析与改进研究
- Title:
- Failure analysis and improvement on diffusion brazing of titanium alloy injector
- 文章编号:
- 1672-9374(2012)04-0060-08
- 分类号:
- V434-34
- 文献标志码:
- A
- 摘要:
- 某次试车中发动机喷注器出现扩散钎焊失效故障,根据失效焊缝的扫描电镜断口观察、X射线光电子能谱和金相分析结果对喷注器焊接结构、工艺参数等进行了改进研究。仿真、试件试验和热试车结果表明,改进后喷注器扩散钎焊强度和一致性明显提高。
- Abstract:
- Because the diffusion brazing invalidation of the titanium alloy injector occurred in an engine hot test, an improvement research of the injector welding configuration and parameters was performed based on the failure analysis by scanning electron micrograph, metallographic analysis and XPS methods. The results of simulation and test show that intensity and consistency of the improved diffusion welding are evidently enhanced.
参考文献/References:
[1]张启运, 庄鸿寿. 钎焊手册[M]. 北京: 机械工业出版社,1998.
[2]美国焊接学会. 焊接手册(第1卷)[M]. 7版. 清华大学焊接教研室 译. 北京: 机械工业出版社, 1985.
[3]桂立丰, 唐汝钧. 机械工程材料测试手册物理金相卷[M].辽宁: 辽宁科技出版社, 1999.
[4]上海材料研究所, 华南理工大学. 机械装备失效分析图谱[M]. 广东: 广东科技出版社, 1990.
[5]李炯辉. 金属材料金相图谱[M]. 北京: 机械工业出版社,2006.
[6]美国焊接学会. 焊接手册(第3卷)[M]. 清华大学焊接教研室 译. 北京: 机械工业出版社, 1986.
[7]张贵锋, 张建勋, 王士元, 等. 瞬间液相扩散焊与钎焊主要特点之异同[J]. 焊接学报, 2002, 23(6): 95.
[8]ISAAC T, DOLLAR M, MASSALSKI T B. A study of transient liquid phase bonding process applied to a Ag/Cu/Ag sandwich joint[J]. Metallurgical and Materials Trans- action A, 1998, 19A(3): 675-686.
备注/Memo
收稿日期:2012-03-13;修回日期:2012-05-02
基金项目:国家“863”项目(2007AA7050604)
作者简介:刘彦杰(1966—),男,博士研究生,研究领域为高室压、轻质、快响应轨控火箭发动机